Search results for query: *

  1. Dusterfreak

    V6 Ram gearbox?

    Im looking for an easy(cheap) manual transmission swap for my - 71 Duster. Could a 2000 RAM 5 speed transmission hold behind an 350hp 318??
  2. Dusterfreak

    Mopar action in florida this week??

    Hi, Im on a vacation in florida this week. Is there anything going on, places to visit now? Heading back to finland next sunday. And, where could i buy MoPar wear, shirts etc. from. florida??
  3. Dusterfreak

    Best header gasket for EQ head?

    What gaskets you have used with EQ an TTI? I tried Fel Pro 1413 but it doesnt match the port.
  4. Dusterfreak

    Magnum serpentine belt

    Hi, does anybody have a part number for Jeep grand cherokee belt without AC??
  5. Dusterfreak

    Jeep alternator to -71 Duster

    Hi, I have a magnumswap going on and Im going to use the Jeep ND alternator. It seems that its externally regulated so I need a regulator since I had Bosch alternator before which has internal regulator. Can I use the -70s mopar regulator?? Or even better, is there aftermarket options for the ND...
  6. Dusterfreak

    Valve to piston clearance

    Ive got KB flat top pistons with valve reliefs, EQ heads and 222/226@.050 roller cam. I dont have solid lifters so I cant measure the clearance, because the hydraulic lifters just collapse. What do you think, should I be worried about the clearance?
  7. Dusterfreak

    EQ head port match

    Hi, any experience about port matching eq heads? Is there enough material to grind about 2mm from the floor? That area sounds hollow and thin... I dont want to ruin anything.
  8. Dusterfreak

    Correct wiring for ignition?

    Hi all! What is the correct way of wiring the electronic ignition when you dont use ballast resistor? Ive got the two wires switched+, other is for START and the other for RUN, so how do I connect them so the engine ignites on both?
  9. Dusterfreak

    True roller rockers for EQ head?

    Currently building a 5.2 Magnum and since I have to put a truck load of money to it, why not upagrade the rockers as well... So, what full roller rocker is direct bolt on to EQ head? And fits under Edelbrock covers.
  10. Dusterfreak

    Duster Ignition problems when hot

    Hi guys, I have -71 Duster, its got 340 engine, Mopar distributor, MSD 6AL, MSD Blaster coil. Also got ministarter and electronic fan. No original resistors in the ignition. Problem is when I drive around and the engine gets to 200 and I stop to MC or grocery store,it wont fire up immediatly...
  11. Dusterfreak

    Borgeson box to -71 Duster

    Hi! Im going to buy a borgeson Ps box for my duster. But I cant decide should I buy it with small or large sectorshaft. My current setup is: -71 K-Member -73 Disc brakes -PS-box from 70`s, has large sectorshaft I have all the parts to do ether way, but which would you preffer, the older smaller...
  12. Dusterfreak

    1978 Cordoba rotors?

    Hi, are -78 Gordoba rotors always 11,75? Im ordering rotors from rockauto and cant find the info on the ones im looking. Any help...? These are the ones I was looking at https://www.rockauto.com/en/moreinfo.php?pk=6162318&cc=1062717&jsn=541&jsn=541
  13. Dusterfreak

    How Big can a 5.2 get?

    What size can a 5.2 be bored over? I know alot of older 318`s been bored for 340 pistons but how about magnums? I just got a 5.2 thats been sitting and its got rust in the cylinders so an overbore is a must...
  14. Dusterfreak

    -69 340 value??

    Hi, I have a -69 340 sitting in my garage and im not gonna use it... But I have a problem, I dont know what to ask for it. Its got standard bore, heads are O-heads but they need total rebuilt. Edel intake or no intake at all, no manifolds. Running engine. What should I ask, please help me out.
  15. Dusterfreak

    Mopar p4529784 360 engine specs?

    Hi, im looking to buy a used 360 that has a Mopar partnumber 4529784, think its a older crate-engine. Does anybody know what kind of cam this engine has, roller or flat tapped? And what kind of HP will it give? Thanks!
  16. Dusterfreak

    Magnum heads- LA TTI Headers?

    Planning magnum swap and I dont want any surprises.. I currently have 340 with TTI step headers and if I go magnum will I be able to use the TTI´s since the LA and Magnum have differences in exhaust ports?? Also, will LA-style Mopar performance valvecovers fit?
  17. Dusterfreak

    Throttlebodies??

    Hi there! Im building EFI 340 in the future and im collecting parts for it, I´ve been looking throttlebodys from ebay, summit, jegs etc. but I really dont know whats the difference between a 300$ an 800$ part? Bet 1000cfm is enough but theres more than a few options, please help me out. This is...
  18. Dusterfreak

    Question about EDELBROCK RPM heads

    Ok, simple question. Can I use 318 63cc edelbrock rpm heads on top of -68 340 shortblock that has original pistons?
  19. Dusterfreak

    Edel air gap+ EFI?

    Hi everyone! Im gonna build a MPI 340 in the future and I was wondering if could use edelbrock air gap as EFI-intake. Just have the injectorseats drilled and welded to it? I have seen it done to an air gap but will it work since its a dual-plane?? Super Victor seems to be the only EFI-option in...
  20. Dusterfreak

    596 heads on -68 340

    Hi, I currently have J heads with 2.02 intake on my stock 340 but they are in bad condition, would need a full rebuilt. Theres a set of these 596 heads for sale and I thought if they would be any good for my engine. They are aerohead reconditioned heads. As I said, the engine is stock as far as...
  21. Dusterfreak

    My -71 Duster "340"

    Hi, I`ve been hanging around here for a while now and I decided to tell something about my Duster. I bought this car in 2008 and it was supposed to be a quick, few month project, a few rust holes, new paint etc. Ill post alot of pics because they tell alot more than my story. Every repair and...
  22. Dusterfreak

    Whats wrong with my Dusters front end?

    Hi, I have a -71 Duster with a -73up front end. Spindels, brakes, pitman arm, steering box (power steering) centerlink... everything else but control arms are from a late A-Body. Problem is that the car is acting strange, its hard to explain but its almost dangerous to drive. Feels like theres...
  23. Dusterfreak

    340 Heads?

    Hi, what heads are these? Casting number 341891, 2.02 intake and 1.60 exhaust. They are from my -68 340 and I was thinking are they worth doing a valvejob and new springs.
  24. Dusterfreak

    Duster mirror??

    Hi, could someone please add picture of a -71 Duster lh mirror? I need a close up of the assembling.. Pretty desperate, thanks guys..
  25. Dusterfreak

    Fast Ez-Efi??

    Hi, has anyone tried this: http://www.efisupply.com/fast_ez_efi.htm Does it work on a 340?
  26. Dusterfreak

    Wanted: -71 Duster taillights

    Hi, I wanna buy a pair of Duster taillights, with no cracks or missing pieces. Or better yet just lenses. The seller must be interest in shipping them to Finland. Thanks, Visa EDIT: Does NOT have to be in a showcar condition, if they would be in one piece at least...
Back
Top