Search results for query: *

  1. Methuselah

    Request some help

    Just an update to this thread. I spoke with a TCI about the kick down on a TF727 not having a kick down or improper setup WILL cause failure
  2. Methuselah

    Request some help

    My friend doesn't do transmission rebuilds, and he runs his business out of his garage. I have 3 friends that own shops non of them do transmissions. Aamoc was the cheap choice. Limited income of 70% of salary due to workers comp, obviously wasn't that I couldn't afford a rebuild, after it blew...
  3. Methuselah

    Request some help

    Ok 2 different shops. First issue from 3/19 post, I was driving on the freeway and the car stopped shifting. I took it to Aamco because I was on work comp and had limited income, they replaced the spring on the valve body side of the transmission, they also for some reason removed the kickdown...
  4. Methuselah

    Request some help

    OK, my current build for motor performer intake, perform cam, full comp headers, 1405 carb with stage 2 jets rods and springs, spin tech race exhaust, triple core radiator, full msd, 8.5mm wires and plugs car was putting out about 235whp. Transmission was rebuilt 8 years ago but was a bone...
  5. Methuselah

    Request some help

    I posted awhile back about a transmission shop removing my kick-down linkage and causing my transmission to fail. They have refused to cover the cost to repair/rebuild my transmission. I would appreciate it if any of you fellow Mopar guys, that are mechanics could possibly post the extent of...
  6. Methuselah

    Transmission question

    Few months back I had my transmission stop shifting into 2nd & 3rd. The transmission linkage spring and the valve body somehow came off. The shop that replaced that spring for some reason removed my kick down linkage spring from the linkage assembly and carburetor. 3 Months after they did this...
  7. Methuselah

    Rear gear question

    I have an 8.25" rear end, with 2:45/1 gears. I want to upgrade to 3:73 gears. Will the stock gear housing accept this or does it require modifications?
  8. Methuselah

    Need help troubleshooting

    Took it to a transmission shop, they dropped the pan and found part of the clutch assembly in the pan. I had lost 2nd gear, and the clicking sound was clutch slap. The shop that worked on the transmission the first time around never put the kickdown linkage cable back on. I drove for 8 months at...
  9. Methuselah

    Need help troubleshooting

    thanks for the reply, it turned out to the transmission, seems like I will be be doing a rebuild, the click is happening during up and down shifts and kick down. My transmission savy friend thinks valve body. :(
  10. Methuselah

    Need help troubleshooting

    I have two different issues. The first one is I think pretty simple. I increased the jet and metering rods on my carb and have been getting a popping sound through the exhaust. My thought is unburnt fuel. The second one just started today. Clicking sound from the end, turning the wheels to the...
  11. Methuselah

    3.55 gears and sure-grip 8 1/4 carrier.

    This the center section only??? Do you still have it?
  12. Methuselah

    You still got the K-member? I live in Cali too I snapped mine last weekend in a wreck I have a...

    You still got the K-member? I live in Cali too I snapped mine last weekend in a wreck I have a 318 is yours for small block?
  13. Methuselah

    What parts are needed

    IU am having my 8.25" rear end rebuilt from the stock 2.45 gear and swapped to a 3:55. Aside from the pinion what else is needed for this conversion?
  14. Methuselah

    Head swap

    How long does it take to swap heads? I'm going to replace the stock cylinder heads with Edlebrock performer heads and need an idea of how long it's going to take.
  15. Methuselah

    What else do I need?

    Not sure of compression haven't checked it yet since parts got put in Cam specs Duration at 0.006" Lift: Intake: 270° Exhaust: 270° Duration at 0.050" Lift: Intake: 204° Exhaust: 204° Lift at Cam: Intake: 0.280" Exhaust: 0.280" Lift at Valve: Intake: 0.420" Exhaust: 0.420" Timing at...
  16. Methuselah

    What else do I need?

    I'm 30, why do ask?
  17. Methuselah

    What else do I need?

    1974 Duster 318 EdleBrock 600cfm 4 barrel Performer intake perform heads performer .270/.270 duration cam Hooker comp headers Magna flow true dual exhaust Performer Hydraulic lifters Aluminum racing radiator High speed starter full msd pointless system And would anyone care to guess what WHP...
Back
Top