Search results for query: *

Bought this used, it was already cleaned up and spray paint black, in average condition, can not use as I thought I could. paid 55.90 with shipping asking 40.00 plus shipping from Northampton Pa. 18067. all 4 groove are the same dia. Dave

Hi All, wife wanted a small portable hot tub for all of her pains. We are in Penna. 1st time owner of something like this, have been reading up but still have questions. This unit just plugs into a standard 110 outlet so heater is not that strong. 1st question do you need to keep the temp up...

Have a on going engine idling/ running problem, have a 69 Cuda 318 . auto , have a Holley carb on engine, I have about 200 miles on engine. thought had a carb problem. I have another post on here about that, from what I got out of the group on here, possible timing issue, so any way, I had some...

Looking for a OEM fuel sending lock ring for a 69 cuda,aun if possible the gasket, I have a aftermarket ring and gasket installed for about 3 years and it just started to leak!

Hi all looking at other parts of ignition system pulled plugs all appear to be light tan in color, have NGK gr4gp plugs, I was surprised at the center electrode it is very narrow compared to other plugs I have seen I looked on line at photos of the NGK plugs and they look like mine so I think...

Looking to replace my old Holley carb, it is a OEM part from a Ford no service parts available, I see Holley has a Classic 4160 , 0-80458SA and a Holley Street Warrior 4160,0-80457S, along with a Brawler Die cast unit, BR67270 Not sure of the difference of the Holley Classic and the Street...

Have a 69 Barracuda, with a 318 , auto trans. back story , over the winter had a Battery Tender brand charger on the battery over the winter like a have in the past, [ battery cables where still hooked up ], come earlier this year appears that the Battery Tender over charged the battery and took...

69 cuda, does anyone make a plastic battery tray ??

Hi All, I have a battery problem, I have a 4 year old Exide lead acid battery, over the past few winters I have had a Battery Tender brand hooked to car over the winter, I have used this same unit for the past 3-4 years never had a problem, had charger on battery some how the Battery Tender...

Some back ground 69 notchback Cuda, have 318 auto with center console, I have installed under dash Knee Knocker A/C unit have not charged the system, on the fence if I want to use it, had a friend of mine along for a ride , he had no leg room with seat all the way back, looked at Classic Air...

has anyone tried one of those exhaust silencers that you put into the exhaust pipes ? some are made by Vibrant looking for feed back to try to tone down the drone in my car with out cutting up the new exhaust system

Was looking in the new Mopar Classic Industries catalog, NEW ITEMS, is door glass clear or tint for 69 notchback, fastback, convertible for 134.99 each, vent glass clear or tint 74.99 each, q-glass fastback 189.99 notchback and convertible 74.99 each, 1st time i have seen new glass for this year...

Problem started with past Sunday night central air was, on was in the 90"s took notice that the out side unit running but no inside fan running, Trane system about 22 years old [ just found out] i check outside unit was just starting to ice up, i turned off the power so no more damage to the...

Getting ready to retire next year 2022, i live in the eastern end of Pa. near Allentown Pa. have a Bi-level single home built around 1975 which is all Electric has electric baseboard heat with an add on central air unit in the attic-crawl space, i think the unit is nearing the end of it's...

Ok i bought new parking light lenses for my 69 cuda, at first look them seemed correct, but went to install them and they look like they made them to big , they are wider and higher and the chrome center cap is larger, almost like for a B body car, i took photos with measurement of my one's on...

I to am using Evans Coolant, new build engine, so no old coolant in the whole new system, used Evans from the get go,have a slightly built 318, have a 22" Champion 3 core alum. radiator, stock 5 blade none clutch Mopar fan blade, with shroud , have a 180 degree thermostat, running a 16 lb cab on...

How do you keep the corrosion from building up on the battery tray and inner fender apron ? i have a battery tender on over the winter months and have noticed a build up of corrosion on the battery tray and down the side of the battery case i have a extra heavy ground cable but still have a mess !

installed a Tuff type steering wheel with correct adapter kit, but the gap from the turn signal lever to the back side of the new steering wheel is very tight, can just about get a finger between the wheel and the lever i keep turning the turn signals on while driving. anyone have the same...

Looking to add a web cam to my computer, so we can use Zoom to see the grand kids, looking for a good inexpensive unit ,not cheap just not high end, any thoughts ? around $100.00.

Looking to hopefully retire in about 2 years { can see the light at the end of the tunnel}, working on trying to pay down house mortgage and 2nd mortgage amounts prior to retirement. but will still have a mortgage to deal with, 2nd mortgage should be paid off, have worked on cutting cuts where...

looking for a v-belt double groove alternator pulley want to add a/c to my 318

In need of a 2 groove fan blade pulley for my 318 that has a/c, -Sanden comp. , & p/s.

Installed a Sanden a/c compressor, have a 1970 318 v8, with power steering ,and lower pulley has 3 grooves, have belts installed but only make contact with the fan pulley for a small contact area so the fan is slipping and engine over heating does any one have a photo of how they have there...

do not drive the Cuda much thoughts on keeping the battery hooked up or disconnecting while parked for a few weeks ??

i have this 12 volt vacuum pump hooked up, the directions state to use a 10 am fuse, if I hook up the pump to the brake booster it blows a 10 fuse, if I do not hook the vacuum hose to the booster it does not blow the 10 amp fuse, it seems when I put a load on the pump it blows the fuse could it...

I see there are different dia. brake boosters, my question is does 8" dia. booster need less vacuum then a 9" unit ?

has any one used a used gm astro van hydro boost brake unit in an a body cuda ??, seems you can get a good used unit for cheap as compared to a new aftermarket unit. was it hard to hook up to the power steering pump ?

have installed a comp cam model # 5500 12 volt vacuum pump kit [ low vacuum because of cam choice have power brakes with front disc ], have double checked the wiring, and ground, I have also installed a 2nd vacuum res. so the pump would not have to run as much, see diagram, the problem seems to...

looking for a very good brand/ place to get a new electronic voltage regulator , 69 cuda have switched from the mechanical regulator and rewired for the 2 pole altenator, and took out the amp. gauge installed voltage gauge, the charge needle pulses and I think it is over charging the battery...

bought an 12 volt electric vacuum pump ,Comp Cams, due to low engine vacuum due to cam choice , have it wired in, power up car, unit calls for an 8-10 amp fuse [ seems low to me ] but I put in a 10amp fuse , fuse blew, double checked the relay circuit wiring to make sure is correct, could not...