Search results for query: *

73 Dart swinger was slant 6 now 318. When I first put the 318 in it car would fire on first hit like clock work. Now 3 years later some times it will fire on first hit and some times you will crank and crank and crank before it will fire. Put new coil on it and its got power going to it and...

I just need one if someone can help me out Thanks

Just need one if someone can help me out. Thanks

Like the subject line said, when I start the car up and if your not holding the steering wheel it will turn to the right all the way. Drives fine turns left and right fine. You let go of the steering wheel it will turn all the way right by its self. Use to be a s/6 car without this problem I...

looking for a rear end for my Dart Swinger somewhere close to Indiana

1973 Dart Swinger was a S6 car now 318/904. Never changed torsion bars. Is there a deference between S6 and V8 torsion bars. Do I replace both. Where can I get. Any info will be greatly appreciated.

I have a 7 1/4 rearend in my 74 dartswinger. It was a slant 6 car. I changed to a 318 and a 904. I want to put some gear in it to help it out. It probably has 2.? gear now do they make ring an pion sets for the 7 1/4 to get up to 3.73. I drive the car very little and don't get all over it so...

Hey guy's I'm trying to help a lady friend out. She is in need of a 225/6. I just sold mine last night. So if anyone has one cheep for sell here in Indiana or close please let me know, Thanks

I recently put a 318 and 904 out of another dart into my s-6 dart. With tranny out I changed the filter and all new fluid adjusted the Kickdown band and the low reverse band according to the Haynes repair manual. Car goes into all gears ok. The problem is in drive frome dead stop taking off up...

$300 56000 miles

I just finished installing my new Dougs 453's in my 74 Dart Swinger 318. Will post some pic's tomarrow to tired tonight. Feel like I just took a *** beating. Started at day break finished couple hrs ago. You talk about tight. I'll have to say dougs knew what they were doing when they desinged...

I want to put the stock manifolds back on to break in new cam and not mess up the ceramic coating on the new headers. I had the Fel-pro gasket set with the manifold gaskets in it. I feel like a dumb *** but here is my question. Why do I have so many gaskets. Attached picture. Am I soupose to...

Does anyone out there have the Mopar cast aluminum round black air cleaner that matches the valve covers they would like to sell. I need one. Thanks

I would like some input on where the cheapest place to get some TTI headers for my 1974 dart swinger. I just put a 318 in it. It had the S-6 so I used the schumacher engine swap mounts. From every thing I have read here the TTI would be my best bet for fit and performance. Sure hate the price of...

I been working on this little teen all winter. Just droped her in yesterday.

S-6 and Tranny 56,000 miles runs great $300

I have a 225 S-6 and transmission I just pulled out today it has 56,000 on it according to the odometer. Runs great! upgrading to a 318. $300 If you would like to see pictures send me a msg with your e-mail address and I will send to you. For some reason I can never get Pictures to post on this...

I have a 74 Dart swinger that was a S6 car and I'm using the Schumacher engine swap kit for a 318/904 colum shift. Looking for info on good headers that will fit good. Please help.

I have a Edelbrock Performer Series Carburetor # 1406 non-EGR that I want to put a Mopar Performance P5249807 air filter assembly round steel/aluminum, black anodized top with Mopar logo on to. Does anyone have this set up and does it fit well or does it need modified. Please give me some...

I just installed new Mopar Performance Valve covers black wrinkle on my mild built 318. I would like a PVC Valve on one side and a breather cap on the other side. Don't really want to do the punch out thing on the valve covers. So can I just remvoe the fill caps and replace with rubber gourmant...

Ready to put on new Edelbrock manifold and instructions say use gasgacinch 9300 on head surface and on intake gaskets. Never heard of it and can't find it so my question is will Permatex High Tack Gasket Sealant work just fine.

Hope I can get the pic to come up here.

Does Mopar Performance parts have a cast aluminum polished air cleaner to match polished valve covers like the black wrinkle? I can't find it.

I would greatly appreciat all the help I can get from the gentalmen on this site seems to be alot of knowledgable men. I have a 1974 Dodge Dart Swinger 225 Slant six and I just bought another 74 swinger with a 318ci. I'm swaping the drive trains out because of body conditions and I want a V-8...

I found a 1969 4 door dodge dart with a 318, 904, 8 3/4. I have a 1974 dodge dart swinger 225 slant six. Will the engine, tranny and rear end out of the 69 unbolt and bolt right into my car without any modifications. I really want the v8 but need to know what I'm getting into befor I start this...

Wanted front wheel well moulding both sides for a 1974 Dart Swinger.

Looking for both front fender wheel moldings for my 1974 Dodge Dart Swinger.