Search results for query: *

I'm located in NJ. I'm looking to spend at most $4k but rather spend around $2500 Looking for a 67-69 barracuda. A project but not to rusted out. Roller with a good body would be perfect! I'm looking for my younger brother he's 19 and we're gonna restore the car for him. Looking for something...

I have a running 5.7 hemi from a 2004 dodge ram. I have videos of it running. Comes with everything! All acessories intake to pan everything! Computer wiring harness. Asking $1500 for everything!!!! Located in NJ will ship if buyers pays

I have a running 5.7 hemi from a 2003 dodge ram. Along with wiring harness and computer! Can send videos of it running. Looking to trade for a running 1966-1970 440.... I firgure the 5.7 and harness and computer is worth around $2000.... Will also sell hemi, computer, and harness for...

I have a 383 torker II will trade for 440 intake

Looking for some used 440 parts for my budget build. Looking for a intake for a 440. A performer rpm or a M1. Maybe something else. Looking for a nib 484 or 509 cam for 440 Looking for a complete gasket set. Looking for a mechincal fuel pump

Ok here's the deal. I can get a low 40k complete 1976 440. I can't find a 66-70 high compression 440 in my area. I can get this 76 440 for $500. I have a 66 baracuda I'm putting it in and it's gutted and all. Problally 3200lbs. Has 4.10s and a spool. Will have a auto 727. My question is I wanna...

Well my great deal on a 69 440 went south when I pulled the heads and revealed a holed piston....and cracked wall..(there goes $350) I'm looking for a 66-70 running junkyard type 440. Just looking for a stock type motor... I can pick up a smog 440 for $400.... Willing to pay double for a...

Looking for cheap A body 440 fenderwell headers Hello, as luck would have it my search for a smallblock ended when I found a 1970 440 engine for $500... In running condition. I am now putting the 440 in my 66 barracuda. It already has inner fenders gone and is braced with tubing from...

I bought a roller 1966 barracuda. I just wanna get it running and driving. I'm looking for a cheap running 360 and trans. Doesn't need to be fancy. Just something I can dress up and make look good untill I have money to build a real motor. Mainly looking for a 360 but would consider a good...

I have a 340 block that is fresh machined and 30 over. Comes with factory forged crank and factory stock rods. (They have not been machined yet) they are in good shape. The block was sonic checked, line bored, decked, dipped and is fresh metal. I'm looking to trade for a mild 440...

Have a 383 torker intake. Good shape. $100 shipped Located in south jersey

Hello, I have a 1974 duster. It is sublime green. Has a 1966 383 motor. Has a 727 trans, looks fantastic, drives great, a great driver car, interior is a 8/10 and paint is a 8/10. Car looks just pure badass. Bench seat , radio works, lights work, shifts firm, great car to get in and just...

I have a A body complete 8 3/4 rear. It's complete from tire to tire. Has the brakes and all... A complete bolt in rear. Has posi center 742 center chunk with 4.30 gears. Ready to go. Could use a quick paint job. Located in NJ would prefer pickup. Asking $1200 or best offer.

I just got my 67 barracuda.. its my daily driver.. 318/904/4.10 im swapping it over to a A833OD... I noticed while looking threw all the threads no one has a full write up and swap done from a auto to a manual. some go about halfway and stop... Im going to document my whole swap here.. I...

Is there anyway I can make my 318 bell work on my a833od? My bell is a 318 bell. Has the 4.454 hole. The overdrive has the 5.150 bearing retainer. Is there a way I can use this bellhousing. I want to because I just bought it.... The bellhousing part number is 3515734

I have a 67 barracuda Looking for everything to swap a 904 to a a833... I'm gonna use a a833od Looking for pedals, clutch fork, z bars, shifter, plate bracket, anything needed to swap auto to a stick... I'm using a a833od...

Want to swap my 904 for a a833od.. 904 is already converted to on flopr Looking for everything needed... Thanks.

I'm looking for a 8 3/4 chunk with 3.55s and a posi... Not a spool... One in good shape of course...

I have a 67 barracuda it's my daily driver... Has a warmed up 318 and 904 and 4.10 gears! Looking to swapping to a overdrive and do not have $2000 plus to spend... I'm thinking the cheapest would be a A833od... Steal all the pedals, linkages, bell, etc to swap right into my 67...

Had a freeze plug blow out of the passenger side rear block.. Engine is a 70.... 318.... Went to the parts store and they can't tell me what size the freeze plug are? Are they 1 5/8"? Anyone have a part number to pick one up at autozone...

I have a 67 barracuda With a 318, 904, 4.10 gears... Running a 25" tall tire... At 60 mph I calculate my rpms to be 3300.... My tach is reading 4500-5000 cruising around 50-60mph... The tach reads 3500rpm when I am going 41mph... I know this is way off.... What could be the...

So some may know sadly i had to sell my 1970 duster panther pink car awhiel ago... well guess what im back!!! with my new purchase!! 1967 barracuda notchback 318 with 340 X heads, intake, purple cam, 10.1 compression 904 manual valve body 8 3/4 rear with 4.10s This car runs and drives has...

Hello all. I started up a thread in the general section seeing about buying a 1967-1969 barracuda notchback and it seems i can get one like i want for the money i have.. Im looking for a 1967-1969 notchback barracuda V8 is a must 318,340,383,440 doesnt matter. stick would be best will...

hey guys.... a little background info... i had a 1970 duster 340... (non numbers it was bright pink) One day a friend stopped by and asked what i was doing with it and i said right now nothing.. he offered me a good amount about what i had into it ($4500) and long story short he towed it home...

I picked up this duster over a year ago... about 14 months actually... I paid what he was asking for the roller... Then I searched my local craiglist and scored a intake to pan running 1970 340 for a steal at $900.... picked up a junkyard 904 with TC for $50... and went to town cleaning and...

Located in S jersey. I have a complete 1970 sharktooth grille Oringnal for a duster. Nothing cracked/nothing broken... Comes with everything. Lenses and all... This thing is almost looks like it was in storage for 30 years... I only have one picture right now but can get more...

I need the correct engine brackets and mounts to fit a 340 in a 1970 duster that had a 318.... I need the metal brackets and rubber part... Where can I get them?!? I need them soon...my motor is in the car with a cherry picker holding it up.

trying to install a 340 in a 1970 duster... nothing is lining up.... my tranny is to close to driver side... the tranny crossmember will not bolt up... has to go back like 3-4".... drivers side biscuit mount doesnt look right... i will post up pics of my engine brackets and mounts...

I think I found why my crossmember doesn't bolt in.... I think I have the wrong tranny.... It's a 904.... But it only has a 14" tailhousing.... Arnt they suppose to be 18"? If it was 18" I think everything would fall into place.... By a quick measurement.... So basically do I need a...

Well I'm convinced that something isn't right.... Does anyone have all the motor brackets and mounts to bolt a 340 into a 1970 duster With a 318 crossmember..... I have brackets and mounts but it won't let the Tranny far enough back to bolt off the crossmember... I have the old style...