Search results for query: *

I have a set of elebrock rpm heads 6077 63cc. When i pull the motor to add the new stall converter n 8qt oil pan. Im thinking about pulling the heads n intake an porting an polishing them. How much of a different will i tell with a mild/good port work done. How far should i port them. Gasket...

I have a 750 aed carb I messed with the acclerator pump cam and the stumble went away a little. Then I messed with the squirters and it went away alittle more but its still there..I went from 31 front an 35 rear to a 40 front an 42 rear squirters, Thanks Jimmy

right now I have a 3600 ATI stall converter an my best 60ft is a 1.75 I'd like to get that down,I'm wondering going from a 3600 to 4500-5000 stall will help. My current mods is this..1970 30 over 340,keith Black pistons its been balanced,Victor 340 intake 750 AED carb, unknown soild lift...

I have a 1970 Plymouth Duster with Small bolt pattern on it, I'm looking for a set 15x3.5 centerline wheels and a set of 15x10 rears. I'm located in Fredericksburg,Va. Thanks Jimmy

I have a 1968 dodge dart..here is the part I'm looking for...I might add to the list when I find out ,ore stuff I'm looking for..Thanks Fiberglass deck lid

I have a 70 Duster with NOS and MSD electronics will a bad stock amp gauge cause me to have problems with stock wiring..With the car off with the power on it works fine.But soon as the motor starts.The gauge moves all over the place it works when it wants to..Thanks need help ASAP..

I got a scale and I weighted some parts..Hope this helps some people out..All theses parts came off a 1973 Duster.. 1.Heater/a/c box everything firewall back-38.5 pounds. 2.Radio-4.0 pounds. 3.Windshield wiper motor-4.0 pounds 4.Insolation under dash and firewall-2.5 pounds. 5.Door Glass-15...

I know it been asked but what the hell this is another one...I'am putting this combo in my project pro street 73 duster.The should weight 3100-3200 pounds with me in it.. Motor.. 440ci bored 30 over making it a 446ci 11.1-11.5:1 Flat top Ross pistons 580-585 Racer Brown Camshaft Ported and...

I got the Schumacher S6 to B/RB motor mount conversion kit.. The Part number is right but It says it for the 73 up V8 to B/RB..Here are some pics..

I was wondering if anywhere on this site has a list if what parts weights. I searched but I couldn't find anything..Like parts you can take off thats not needed and if you replace something with Fiberglass and whats the weight savings. Thanks Jimmy.

I have search and I couldn't find what I was looking for..Around how much will it cost to bore a 340 30-40 over and get everything done. New cam bearing,freeze plugs,hot tanked and do what ever has to be done for a 416ci stroker kit. I might be able to find a complete motor cheaper than I could...

I'am woundering whos on yellowbullet.com because I try to register and it says this..Sorry, registration has been disabled by the administrator.How will I be able to register on the site.Thanks Jimmy.

I have looked on this site and I haven't found what I'am looking for. I'am woundering whats the biggest camshaft I can go with.without worrying about valve/piston slap. I would like to go with the biggest camshaft I can without worrying about clearance problems..I would like to go bigger than...

Here are some parts I'am looking for mine and my dads.. I will probably be adding to this list.. 1. Fiberglass Hood (Dads) 2. Fiberglass fenders (Dads) 3. Fiberglass rear bumper (Mine) 4. Fiberglass Doors (Dads) 5. Drive shaft for 727/8 3/4 (Mine)

I would like to see how many people that lives near me for when I get this duster up and running we should go to places and rep the MOPARS.

I have try'd looking and I can't find what I'am looking for...ok here it is I have a 73 plymouth duster It has the slanted 6 K member. I have a small block K member out of a 70-71 Dart. I have another buddy with a big block K member out of a 68-69 Cuda. I was woundering if any of them 2 will...

[1971 dodge dart] For Sale Shipping from [Fredericksburg,Va] Price: [3,000.00] Payment Methods Accepted: Money Order,Cash [Item Description] This is a 1971 Dodge Dart with a 360ci motor It has a 4 barrel intake with a quadrjet carb. It has 340 manifolds. It has a auto trans with a 8 3/4 rear...

This car started off with me and it came back,You know what they say when a car comes back don't get rid of it again.. So I'am gonna build this car than the 71 Dart.. This car has the spring relocation kit with super stock springs and it has 8 3/4 with 456 gears with a spool. It has big bolt...

I have a set of 915s I would like to find out what size valves are in the heads. They have the Casting number of a J head but it looks like a U. The heads came off a 1970 340 and there orange in color. They didn't go to blue till late 71 up..The Intake and the Exhaust Valves are almost...

I just bought a car and the title was signed by the seller and buyer and he never tittled it in his name..I bought the car off a buddy that bought the car for junk and it was to nice to junk. So I bought it for 300.00 dollars. What do I need to do to get a tittle in my name.. I now I can't take...

Hey ya I'am Jimmy I live in Fredericksburg,Virginia I have a 1971 Dodge Dart Swinger with a 340ci 4 barrel carb. 727 transmission 8 3/4 rear end. Its bone stock for now. Iam doing the body work its 95% rust free and I'am getting ready to primer it. It has a little bit of surfest rust. and it has...