Search results for query: *

  1. S

    Pulling engine & tranny

    I've found that if you're going up through the engine bay, it's easier to do them seperately. There's not a whole lot of room in there. The other alternative is to remove your torsion bars, rear tranny bracket, prop the back of the tranny with a block of wood. Remove the upper control arm adn...
  2. S

    Air compressors

    I tried one of the cheapo harbor freight $150 compressors and it sucked ***. Boned up for a $300 craftsman 25 gal 2hp, and it does a great job.
  3. S

    1969 Dodge Dart Convertible for sale

    What part of FLA, and how long would he be able to hold on to it before being picked up?
  4. S

    ball and cup push rods installation??

    Hi all, I have my engine in the car, and want to put in my roller rockers. I just got some clevite ball and cup push rods for the job. Nowhere can I find the specs to put adjustable roller rockers on a hydrolic cam engine. My setup is a 360 with the stock 340HP grind purple shaft and...
  5. S

    just dropped the engine in the bay today

    Thanks all, Yeah, it's taken me 4 years to get this far. Good parts are key, but every nut and bolt that I re used has been blasted and painted. All new front end pieces, and the 360 has the 340 HP Cam. Waiting on some 7/16 torque converter bolts now, the originals were 5/16, and my hughes...
  6. S

    just dropped the engine in the bay today

    Hey guys, after all the mods to the engine, and all the front end work I did, I had to remove 1/2 the front end to get My TTI's in, but it was worth it. here's some pix.
  7. S

    1973 Duster for sale

    where is it
  8. S

    San Diegans

    Hey Germz, Look at the mopar club of San Diego. They meet at a restruant by Fry's on aero. I live in the North county, so I rarely go. If you need help with something or advice you can email me at stuthemoparman@sbcglobal.net - Stu
  9. S

    Spring Fling May 5&6 2007, who's going? -updates

    Steve, Thanks for a great show! pleasure to meet you as well. Found a couple of good deals at the swap, and saw some really awesome cars. The give away car was awesome. Done really nicely for a garage job. Someone was happy winning that thing I'm sure! Hopefully I'll have my car ready for...
  10. S

    lower arms

    the LCA should have a pivot pin, which should get a new bushing. Also there's a bump stop. - Stu
  11. S

    Help. Timing chain installation 360 LA

    You're right Fishy. What threw me off was that I expected to have the dots lined up 12 and 6, as the instructions said, and be looking the lobes where the power stroke was about to take place. Rookie Cam installer mistakes. LOL Thanks guys for all your help.
  12. S

    stock retainers clips

    Thanks guys. the stock had the same angle and fit very well in the comp retainers. I got the MRE cam package that included them. - Stu
  13. S

    Help. Timing chain installation 360 LA

    Hi all, Talked to MRE this morning. Even though the instructions say that the cam gear lines up at 6 oclock and the crank gear at 12, they told me that the cam gear needs to be at noon as well. Thanks for all the help guys. I knew this thing was 180 deg off. - Stu
  14. S

    Help. Timing chain installation 360 LA

    Hi all, i'm installing my MRE double roller timing chain. The crank key is between 1 and 2 oclock with the #1 and #6 piston at TDC. I line up the dots between the crank gear and the cam gear but I notice that the cam lobe for #1 intake is straight up. Is this correct? I would expect that...
  15. S

    stock retainers clips

    Hi all, I'm putting in my new mopar perf springs and chrome molly retainers, but the comp cam clips I got were single groove when my valves are double groove. The stock clips I have are new and I'm using those. Anyone see an issue with that? I'm using P4120249 springs and my cam is the stock...
  16. S

    360 price

    If this helps. I bought a rebuilt 360 on ebay from a rebuilder, delivered to my house for 875
  17. S

    Procomp roller rockers

    Thanks Dave. Any advice on setting the valve lash?
  18. S

    Procomp roller rockers

    Hi all, i bought a set of procomp roller rockers off ebay. these seem like really nice rockers with needle bearings and all. Unfortunately the support I'm getting from the ebay dealer and procomp are not very good. Here's my problem. Stock push rods for hydrolic are ball end at both ends...
  19. S

    Spring Fling May 5&6 2007, who's going? -updates

    Nah, I just want to get there as people are unpacking so I can get the pick of the litter. Last time, I was 10 seconds too late for some LBP crager ss with new rubber for 450.
  20. S

    Spring Fling May 5&6 2007, who's going? -updates

    Steve, what time does the pay lot open for parking?
  21. S

    Newbie from SOCAL

    Hey Newb, welcome aboard. Don't miss out on Spring Fling up in Van Nuys on May 5th. The swap meet there is great if you need to pick up some parts, and there's a lot of cars there to give you ideas. I have lots of 727 parts that I'm not going to use, including a 2500 stall (Hughes I think)...
  22. S

    Newbie Needs Info Help Please

    Hey 71, are you by Paso?
  23. S

    our troops in action! GOD bless them please

    Well chuck, I'm sorry for your loss, I haven't had to deal with the loss of my children, and I'm sure it's unbearable. I'm not trying to quell your freedom of speech. Actually, I enjoy having discussions, like the one about being there because of 911. Dubya has already come out and said that...
  24. S

    our troops in action! GOD bless them please

    BTW, Chuck. Have you ever had to kill a man before?
  25. S

    our troops in action! GOD bless them please

    Well said Krabby. And chuck, this is a friendly forum. to make that insinuation that I am stupid and an *** hole is pretty f'd up in my opinion. I have no personal beef with you, why the attack? So, lets just say that one of us is drinking the kool aid, and the other wants to know what's in...
  26. S

    our troops in action! GOD bless them please

    Hi X, I appreciate the kind words. the quote "NOT FOR KIDS! turn on your sound. also, this is not for the hate Bush, hate America, love the enemy crowd." is used by right wing talk radio hosts and the Ann Coultour types and Bush, to label anyone who questions this war, the right for our...
  27. S

    our troops in action! GOD bless them please

    Actually, as a Hate Bush, love america, faught in the first gulf war and was awarded the Bronze Star person, I find your comment offensive betty. Anyone here actually ever killed anyone? these poor guys will be living with demons for the rest of their lives so that king george can have his...
  28. S

    Spring Fling May 5&6 2007, who's going? -updates

    D'oh! Thanks for the info. Good think i'm not planning on buying a tranny this year, and bought a wagon.
  29. S

    Spring Fling May 5&6 2007, who's going? -updates

    OK, same setup. Excellent! I like to park there very early to get a spot on the main street close to the swap area. So, what's the identifier at the airtel bar to show that you're a FABO member?
Back
Top