Search results for query: *

Where can you find pistons for Kelsey Hayes calipers? 71 Demon

I’m restoring the front suspension for a 71 Demon. I would like to get the front disc brake splash shields replated. What would be the correct plating ? Any suggestions on who could do such plating ? Thanks Warren

Which bump stop is correct for a 71 Demon ? Thanks Warren

Was the sway bar on a 71 Demon bare metal or black in color? Thanks Warren

Rebuilding the front suspension on my 71 Demon. The strut rod bushings that came with my PST kit are 1 piece. The ones I took off were 2 piece. Could you take a look at this picture and tell me if I have the bushing and washers orientated correctly? Thanks Warren

I’ve got some front suspension hardware that I would like to treat with black phosphate. Has anyone done this at home? Where did you get the solution? Thanks Warren

Does anyone offer spray paint to replicate the cosmoline color of LCA’s? Thanks Warren

Wanted vinyl top trim pieces and drip rail trim for vinyl top 71 Demon. Thanks Warren

What would be the correct third member for an original 71 Dodge Demon 340? Thanks Warren

Has anyone used a reproduction rally dash bezel in their 71 Demon or Duster? If so how did it fit and did you have to make any modifications to it? I have an uncut, unbroken factory one. I am trying to decide weather to have it restored or buy a repo. Quite a bit more to restore but it’s an...

Does anyone reproduce the chrome release buttons for 71 Demon bucket seats? Thanks Warren

Classic Industries shows three patterns for trunk mats, gray herringbone, gray houndstooth, and gray plaid. Which one of these patterns if any would be correct for a 71 Demon? Thanks Warren

Is E70 14 the size tire that would of originally came on a 340 Demon? Thanks Warren

I need to order a new tank for my Demon. I was just wondering if there is a particular brand or supplier that has better tanks than any other? Or are they all made in the same place just branded different? Thanks Warren

I am needing a driveshaft for my 71 Demon 340 / A833 / 8 3/4. When I look them up in my parts book I come up with 2 different lengths one is 48.96" 2 3/4" shaft the other is 51.96" 3" shaft. I haven't been able to find much info on manual trans length. Anybody out there mind pulling a...

I am looking for a couple of pictures of an original 71 Demon bucket seat ( the type I have pictured) around the push button area and seat back. I am trying to determine if I have the correct seat frames. Thanks Warren

Would a set of steel wheels off of a Formula S Barracuda be the same as what would be on a 340 Demon? Same back spacing? Thanks Warren

The parts manual shows a 14x5.5" steel wheel and a 14x5.5" Norris Thermadore steel wheel. Which one of these would be correct for a 71 Demon 340? does anyone make a reproduction with the small bolt pattern? Thanks Warren

I am getting ready to reassemble my 71 seat tracks, and I was wondering what would be a good grease to use on them, something that will hold up to the interior temps on a hot day and not run all over my carpet. All suggestions are appreciated. Thanks Warren

Can anyone help identify this seat? I think it is out of a 72 Demon or Duster but I am not sure because I thought 72s had all vinyl seats. If it is out of a 72 Would the seat frames be the same as a 71. Thanks Warren

Does anyone know where a replacement rivet can be found for the 2 red arrow locations? What about the white plastic insulator at the front of the window represented by the green arrow? Thanks Warren

After disassembly and cleaning of my 4 speed I noticed 3 white paint blotches on it. One was located top center of the tail housing, one on the side of the tail housing where the shifter mounting plate is located, and the other was at the bottom of the front bearing retainer. These look like...

Can anyone recomend a plating shop to rechrome a Hurst 4 speed handle? Thanks Warren

On a 71 A body model 833 trans what goes in the hole on the side cover? The parts list that I have shows the back up light switch, but mine a switch located in the back of the case. Thanks Warren

Could someone please give me the following hood stripe dimensions for a 71 Demon? #1 edge of hood to the outside of the thin stripe. #2 width of thin stripe. #3 distance between thin stripe and solid black area. #4 distance from rear of hood to front edge of solid black area. #5...

Wanted, grill for 70-71 Dart or Demon. Must be in excelent condition. Please leave P.M. or e-mail at wolftaxidermy@psci.net Thanks Warren

I have seen these bolt kits out there but I can't remember who had them. Does anyone know who offers them? Thanks Warren

Here is a couple of pictures of the latest progress on my Demon. The work is being done at the AMD Installation Center in Clevland Ga. I am going to pick the car up this week weather permitting, then it's off to paint and body. Thanks for looking. Warren

I am looking for a broken 340 fender emblem. A friend of mine needs either the 40 or the 4 to make one more 440 emblem for his 72 Demon drag car. I hate to see him have to buy a new one and cut it up, when I know some one has a broken one or a used one laying around. Let me know if you can help...

I took advantage of cash for clunkers yesterday. I traded in my work vehicle, a 1997 Grand Jeep Cherokee with 270,000 miles that was just flat wore out for a 2009 Caliber. With the $4500. from the goverment and another $4500. from Chrysler, plus the lifetime powertrain warrenty it was just to...