Search results for query: *

I need help!!! Changing my 68 Cuda to PS, are all the PS boxes the same from 68 to 72, are the pitman shafts all the same size, also I need a PS column, what are the lengths on the PS and the manual columns, and how do you measure the total length, changing due to shoulder injuries. Thanks for...

Took my headlight surrounds off my 68 Cuda and they had several different screws holding them on and different lengths also, anybody got a pic of the correct screws I should be using and the length, and where to get them. Thanks Dave

How do you decipher the #'s on a Cragar rim, used set and trying to find out what they are. Thanks Dave

I have done it but 30 or so years ago, how do I get the connectors to come out of the engine side of the bulkhead connector, I need a refresher so I don't destroy things, Thanks Dave

Need help finding a fusible link for my 75 Duster 360, thought I found one at NationalMoparts but it was for a 74 and the connectors are opposite to 75 fusible link is on the bulkhead the fusible link goes into the bulkhead and then connects into a clawlike connector on the red 10 gauge wire...

Long story, had to move dipstick after new gaskets and paint and reinstalling the engine, broke the dipstick off flush, put a tap in it and got it to rotate but nothing to grab onto, any ideas beside taking the motor out and pan off, any help would greatly be appreciated. Thanks Dave

1975 360 e58 with PS no A/C, was apart when I got it, want to know how to mount the air pump and the ps pump and the alternator as I found a mount for it bolted to the air pump bracket, it;s bad enough when I take it apart and forget but this was all cobbled together with backwoods added A/C...

Looking at a brake lathe, $350, says it all works and has all attachments, how old is it and it is for my use only, so not much use by me, is it worth my while, any comments.

I need a kickdown for my 68 383 Cuda, are they specific to a,b,c body or do any fit. I should know this but I do not. Thanks for any help. Dave

I found this found this front console plate with my parts stuff. Never been used as no nuts have been screwed on to it. it's for a 4 speed(standard) and 69 up A-body. part#2877234 94200 RH1 Anybody help me with specifics on this, I have an interested party, and would like to know...

Can I and what is needed to change from standard steering to power steering in my 68 Cuda 383 Auto , car has TTI headers on it also. Thanks.

68 Formula S 383 Fastback. Have #'s block, now a 400, 30 over KB pistons, Edelbrock performer heads and intake, TTI headers, rebuilt 727 transmission, 323 sure grip, QQ1 blue with black bucket and console interior,white stripes, from Atlanta Georgia, original panels, frame and floors are all...

Ok guys, help me show my Wife she is not right all the time(she says take it to someone to fix. 68 Cuda, I changed the drivers door striker(damaged) now the door will close great but pop back out 1/2 inch. I hope I splained this right. Any help is appreciated Dave

Did all 1975 Dusters get a thumb lock on the steering column or just the console cars. I have a 75 360 Duster with buckets no console without the thumb lock on the column and just wondered if it had been changed or not. Thanks DAve

I need a diagram for the wiper system on my 1975 Duster, the link arm from the motor to the pivot assembly is off and I have no bushings or retainers present on either end , need to know what parts to get to have my wiper system working again. Thanks Dave

Hi All I need a picture of a starter cable for a 1975 Duster 360 V8, specifically the top 1 foot section. Thanks Dave

Off of my Barracuda and was working, can take the lines off for shipping. This is a line lock solenoid. $15 plus shipping. PM if interested. Located in Oakwood Ontario Canada.

I have a very nice pair of centres from an early Barracuda, not sure of size or year. I have had these stored for 40 years. $25 plus shipping. PM if interested. Also have 2 sets of 68 Plymouth Dog Dish caps for sale $75 and $125 plus shipping. Located in Oakwood Ontario Canada.

Set of 1968 Plymouth Dog Dishes all in excellent shape, one has a few small dings and a crack on the outer edge. All will polish up great. $80 US Oakwood Ontario Canada

New reproduction 1967 Barracuda passenger taillight lens, bought from Laysons $90 US Oakwood Ontario Canada

1968 Barracuda Formula S, original 383 big block, have the numbers bare block, now has a 400 with a 383 forged crank and aluminum heads and intake, rebuilt 727. Atlanta Georgia car, original body panels, 323 sure grip(or 391), TTI's. QQ1 exterior with black interior. Located in Oakwood Ontario...

I need the plastic bushings for the 727 transmission linkage and for the bushing for the shifter bracket also. Thanks Dave, Located in Oakwood Ontario Canada.

Anybody have pics of the nippondenso mini starter on there 383 Cuda. I just bought a nippo 17466 and it does not look like it has correct orientation or clocking. Thanks Dave

I bought a 68 383 Formula S, it has a Quick silver shifter and reverse manual valve body. I want to change it back to as close to stock I can be happy with. What valve body will work and what kickdown linkage will work if it is not an original 383 A body linkage. Thanks for any help. Dave

Need a pair of used Black front door panels for my 75 360 Duster, Prefer southern Ontario, but let me know what you have. Also black buckets. Thanks for the ad .

Looking for a 68 Formula S, original car, rust free, can be a roller, but must be rust free, may consider a 67. Bright Blue Metallic with white interior and A/C is nice.(Wish List)Please Pm with what ya got. Will travel for right Car. Thanks

I need a pic of a 67 cuda steering wheel installed, I took mine out and now I am second guessing if I have it on right. Thanks Dave

I need a pair of Formula S emblems for the fender of my 67 Formula S, does anybody repro these, if not looking for really nice units. Thanks

I am in need of a good set of 68 - 70 340 a body exhaust manifolds, I would be interested in the passenger side only if one was available. I am located in Uxbridge Ontario and would prefer them to be close but willing to get shipped from anywhere. Please PM me with pics #'s and condition and...

I may need to buy a set or rear interior side panels or just repair the ones I have, I have a white interior and need to know the colour of the panels, (are they black up high and white below that) Thanks