Search results for query: *

A quick edit. The rotating assembly is .030 not .020 as advertised. Please take note of this change

Sorry guy's... Inbox is now empty

7 Used Ross forged dome pistons for stock bore 440. Don't know much about them other than they came with a block I built up for a customer. $100.00 Will ship at buyers expense. Ships from Hudson, Florida 34667

Summit balancer for 340. $60.00. will ship at buyers expense. Ships from Hudson, Florida 34667.

340 balanced rotating assembly. KB243+20 pistons, Scat I beam rods and steel crankshaft. Around 1500 miles on it. removed to build a stroker. $500.00 or best offer. Will ship at buyers expense. Ships from Hudson, Florida 34667

Back a few years ago we did R & D on a restricted sb chevy on the dyno at 10-1 compression on vp 110 and 93.3 pump gas back to back. pump gas made 6 more hp than vp. We tuned for the best pull with each. Not earth shattering but in a restricted engine every bit counts. Yeah I know...it was a...

SOLD!!!

New Engle cam and lifters. Installed and removed for Hyd. lifter cam. Cam was removed from the engine before the heads were put on. Cam Specs. .561 lift 247@.050 dur. on a 110 centerline. $120.00 plus shipping from Fl 34667. Pm me here. Rick

From one former gm guy to another...no problem! If I can help in anyway don't hesitate to shoot me a pm.

Stanton Racing or Arrington should be able to help you out. If you still have a road block go to the W7-8-9 Facebook page. Brett Miller or many others there can steer you in the right direction with these. I'm in the middle of building R3 W8 as we speak. Same as you I've been building...

Just received a new Strange D60 for a clients car. Very nice quality piece and if you plan on making power it is the way to go. Unfortunately it took over 3 months for them to deliver it to me. His other car a W2 340 7.24 1/8th broke a 4.10 489 just like J pars within a week. I've seen many 8...

230lbs. sounds about right. W8 heads are not light weight pieces either. In building a 1000+ hp boosted engine saving weight in the engine is not the place I would be looking to save IMO. An R3 block and w8 heads are stout pieces and will live long and happy lives in a boosted application. Also...

The short deck version R3's are around and can be found in 48 and 59 deg. They will handle 1000hp easy. Now for the hard part. They are not cheap or easy builds for the average Joe. If you go that route I have a short deck boosted rotating assembly I'd be willing to let go. Currently building a...

Just like a gear drive should be.

Disassemble, inspect and reassemble and you should be good to go. With that said personally I don't like gear drives. They are noisy and can make life difficult when you degree in the cam. I understand and can see there use in a racing environment. Once again this is my personal opinion and...

Still looking? I have a 904 with converter.

Kent doesn't do e-mails. Best to call him.

$225.00 shipped. Hate to have to put them on ebay.

$250.00 shipped

Another one for the converter. Most converter people will give you one free stall change. Even just a couple hundred rpm can make a big difference in torque range of a stroker. You're not looking for much and it's only labor.

New complete set of PRW 1.6 roller rockers with shafts,shims and hold downs for std la small block heads. New in box. 275.00 shipped in continental U.S.

What exactly are you looking for? I may be removing one shortly.

We switch the car over to a 4200 stall converter. The car weighs 3160 in street trim. Not sure on torque. the car has ran 7.24-93.27 in the 1/8th if that helps.

ACC 10" streetfighter converter part #54095. This converter has maybe 100 miles and 8 1/8th passes on it. Flashed to 3400 behind a w2 headed 340. Not enough converter for this application. Went to 4200. Summit and Jegs get well over $500.00 for these. $200.00 plus shipping to lower 48 states...

I have a fresh sb 727 at the shop. Customer changed directions. I can see what he wants for it. Shipping might be killer though...

Which track are you heading to? Lakeland has better prep but a short shutdown. Showtime has a nice shutdown but spotty prep at best. Would be a great little track if the promoter cared. I'd say 8.70 at Showtime and 8.50-8.60 for Lakeland.

Peter, this crank was sold over a year ago. I do still have the 333 stroke crank, grp rods and cp piston rotating assembly.

I'm interested but not sure how to pm in the new format. Probably just over thinking...

It was good to meet you Phil and thanks for the kind words. Glad to hear your op gauge working. Of coarse all that 5k rpm tire smokin stuff was in the driveway and not on our public streets right!!! LOL. Have fun with your toy and I'm here if need be. Oh and that noise I waved my Harry Potter...

Sure thing Phill. My pleasure to hook up a fellow A- bodyer!!!