Search results for query: *

  1. R

    brake upgrade

    I was planing to do a cheap brake upgrade but as I hope to bring my dart to shows and have others trust me with there rebuilds I got what I hope is a good upgrade.. I posted the details here will use this thread to update progress. I have shipping info on the parts. If any of you follow...
  2. R

    Update On Laysons Problem

    So you just bought door clips from Tom Race http://rtspecialties.net/ back before we both left Az I would be hanging out chatting with Tom and his fax would fire up with all the orders year one got he would ship them all out for them. So you just paid year 1 to fax the order to Tom of course...
  3. R

    got a parts car for both a bodys

    I just did a deal for a 66 dart 4 door I will use some parts for the dart and the motor is 100% complete so I will use that for 66 cuda. Here the unknown it has 100% complete Fact AC but for a 66 dart dash not a cuda dash or a 65 dart dash..... Would love to pick up a new cuda dash that...
  4. R

    just pulled a 8.75 from a 66 b

    Sorry for the quick post yes I ment K frame swap in my rush I was not clear and did not profe reed it.... So the K frames are the same? Sweet I did not want to go with conversion mounts as i am getting a donor car with the 273.. All the A bodys I built in the past have started as V8 cars...
  5. R

    just pulled a 8.75 from a 66 b

    For the blue 65 dart. Also I am going to use the 273 I got with my 66 cuda in the dart. I got the complete manual disk brake kit from Master Power with cross drilled and sloted roters (sp?) I am doing a sub frame swap with bigger t-bars instead of convertion mounts. Thinking of...
  6. R

    Anyone use R/T Specialists??

    i would say that we have been friends for 10 years i was sad when he moved his shop east. Tom is a great guy I started as a customer ended as a friend.
  7. R

    Starting to work on the 65 dart

    Will rebuild motor and have Chris Andrews AndrewsRacingTrans do the trans I have hired a painter so things are starting
  8. R

    body panel help

    thats why i do not like vinyl tops sad. B4 i did any thing else to it I would gut it and check the floors when the water came in it went somewhere
  9. R

    1971 Dodge D-200 Camper Special

    Sold ( I need something to haul the a bodies with LOL ) but first it will need a little work.
  10. R

    5.9L LA powerd '88 Wrangler....

    Humm I remember a yellow challenger sitting in my garage for 2 years while I ( saved money to fix it )
  11. R

    Turbo 440 duster

    thats the info I was looking for :) thanks for sharing looks great
  12. R

    Colorado salvage yards

    I go to Webb on 94 in ellicott co see pic http://picasaweb.google.com/Robertson.Technologies/WebbsYard
  13. R

    Greetings from the Rocky Mountain State

    Hello my shop is in pueblo colorado have lots of slant stuff down there. I live in Manitou Springs you may have seen my dart?
  14. R

    Turbo 440 duster

    I hope he posts more info WOW
  15. R

    Thanks Roberson_Tech!

    glad I could help
  16. R

    Pennzoil Syncro- mesh

    I have owned a few turbo cars the ones I bought new never had a turbo failure and I only used Mobil 1 from the first oil change also I always let them idle for a few min on hot days or if I had ran them hard. ZERO turbo failures on these motors. I bought 2 used 2.2 turbos and lost both turbos so...
  17. R

    Pennzoil Syncro- mesh

    I HATE pennzoil when I worked at a junk yard full time I could pull a VC off and see a lot more deposit there I would open the door and sure enough the sticker there was a pennzoil yes that was a long time a ago but..
  18. R

    OEM PCV Valve & Breather Cap, "65" /6

    The the stock breather entails is a wire mech to ( filter the air ) if yours is blowing out I would suspect blowby I clean mine ( PCV and breather ) with carb cleaner. Do a leak down test and check the vacuum under load I had a vacuum leak on one of my 65s that only showed up under...
  19. R

    Cracked piston in fresh engine

    When I was stationed at seymour johnson afb I made a run to Pope I had a good time in your fair city but that was in 78. What was the piston to cylinder clearance? It may well have been from the head gasket but I have to ask how bad was the exhaust leak?
  20. R

    Altered Wheelbase Project.

    purest humm well the blue dart is still 100% stock was planing to do a conversion on it but it was bone stock so I have left it that way but the car you started with was no cream puff so I say way to go. First check out Mopar Action oct 2007 page 50.. That was the first I knew they made...
  21. R

    Altered Wheelbase Project.

    Sorry I could not upload the pic's
  22. R

    Goodguys carshow pics...Savage GT!!!

    So whats left dodge LOL
  23. R

    building a flow bench to test the heads I port.

    I picked up 10 of the vacuum pump motors I wanted on e-bay for 179.50 for all 10 when I made the first post I was planing on spending from this site http://www.centralvacuumfactory.com/...olt-p-448.html 169.00 each but I wanted this 2 stage pump so that I could maintain the same pressure drop at...
  24. R

    building a flow bench to test the heads I port.

    I spent a lot on porting equipment and I want to take it to the next level but mainly for over 20 years I worked on Vacuum systems that made micro chips for intel and as a hobby I have ported a lot of heads building this bench will let me use some of my skills I picked up at intel to make my...
  25. R

    Need Holley 1920 1 barrel part!!!!!!!!!!

    got off my lazy ####$ and dug it out of storage :)
  26. R

    building a flow bench to test the heads I port.

    I think I am leaning toward this setup http://www.flowperformance.com/ I was thinking about this http://www.performancetrends.com/ez_flow_system.htm But to be accurate with a orifice from what I have read about flow benches, combined with my 22 years measuring gas flow and pressure...
  27. R

    E brake cable for early?

    Will try to use lube it and measure length thanks
  28. R

    Electric water pumps

    daily driver or weekend only street car?
  29. R

    Aluminum Intakes dont seal on X heads

    If it were mine I would do this. Learned the hard way be careful after porting the 906 heads on my 451 I asked the machine shop I used in Az to dress the valve seats and cleanup the head gasket the charged me like 300 because the heads were as they said "all f'ed up and cut at some angle" so...
  30. R

    Time to work on the 66 Barracuda

    You old timers remember I bought this 66 here I have big plans for the car but my income has dropped and it is just sitting in storage. I also lost the title it looks like I have 3 options 1) part it out this would break my hart. 2) I found a date correct stock 273 2v with AC I can...
Back
Top