Search results for query: *

Hi, I'm looking to put a coolant recovery system on my 1972 Demon 340. Now I'm being told by a few local guys that since it didn't come with one that it might be a lot more than just bolting it in to make it work, Can anyone give me guidence on how to do this? Thanks in advance Tom

Hi, I'm looking for a pair of sockets for the rear of my Demon 340. The ones that I need are for the Brake light,turn signal 1157 Bulbs, not the backup light sockets. They can be used hopefully with @6" wire tail on them. Please inbox me with price. Thanks Tom

Hi, I have a 1972 Demon 340, and was wondering if the 4 way flashers have there own flasher or use the flasher for the turn signals. I'm changing my tail lights to LED's and wanted to know how many led flashers I needed to buy. If there is two does anyone know where it is located? Thanks Tom

On the door pulls on the inside of my car ( 1972 Demon 340 ). Can anyone tell me what thread size the rod that the pull to unlock on the door is? One of my original ones broke the other day. I have a new set but don't want to force thread them on if I can pretap them, or if someone can tell me a...

Hi, I have a 1972 Demon 340, I want to change the tail lights out to LED's. I wanted to know if there is a favorite or preferred bulb that everyone is using. Is there any that have the load resistor "built in" to prevent hyper flashing? Thanks Tom

Some of us here in NJ are having a Discussion, on when to change your oil for the Winter. Is it best to change the oil with @600 miles on it before storing it for the winter? Or wait and change it fresh for the new season? Any opinions on this?

Hi, as the title says, I'm looking for the front trim for the hood of my 72 Demon 340. Mine has a few dings on it and am looking for a clean one. Please pm me with any info. Thanks Tom

Hi, I'm looking for the size of 4 screws that go over and under the headlights on a 72 Demon. There are two on each headlight to hold the grill on, I also need two of the "slip nuts" for the same location. Thanks Tom Sorry for the duplicate thread.

Where can I find the "rubber" pieces on the end of the sun visors that hold it to the rear view mirror. These are for my 72 Demon 340. Thanks Tom

Hi All, I have a question on oil changes on a car that I put @ 500 -700 miles a year on. A little background, the car is my 72 Demon 340, I use Valvoline VR1 10/30 racing oil with a Wix filter. I change the oil and filter once a year at the beginning of show season. Some people are...

Just wondering if anyone has tried this and how they liked it. Been seeing a lot of buzz about top coat F11 and was looking for some feedback on it. Thanks Tom

Can anyone tell me what voltage drop I should have across my Dual (4 pin) ballest resistor ?I mean if I have @ 13.4 volts in what should I have on the other side? Thanks Tom PS, just doing a little trouble shooting.

I'm hooking up the stock cigar lighter in my 72 Demon 340. It appears that all I have to do is run a 12v switched power @ 15 amp fuse for protection. I tested the socket with a 12V power supply and it worked fine. My question is how do I remove the socket from its holder? Also does anyone know...

Hi, as anyone had this applied to their car? A few detail guys around here are swearing by them. I just had my Demon striped and repainted @ 16 months ago, so I was leary about this, so I wanted to throw it out here and see if anyone has any experience with it. The detailer told me he had to...

Does anyone have diagram or a pic of the charcoal cannister setup for a 1972 Demon 340? Mine was never setup and I want to set it up. Thanks Tom

My 72 Demon 340 has matte black vinyl stripes, is it ok to use "quick detailer" on them when I wipe the car down? How about wax when I wax the car? Thanks

Just curious on if there is any advantage to putting 360 heads on a 340 with J heads? Juet curious as someone told me that the 360 heads breath better. Any truth to this?

It seems that once in a while ( once every outer month or so ) I'll park my 72 Demon 340 get out hang out for a few hours or so. When I get back in to start I turn the Key and nothing. Everything else works fine radio, lights ect. I'll wait a while longer, nothing else changes and it starts just...

Waiting to get my Mopar Performance Valve covers and air cleaner back from Phoenix Specialty coatings. Now I'm looking for spark plug wire looms to help showcase the powder coat work from Leanna. Any Suggestions? Thanks

I just recieved my new carpet, trim fit molded for a bodies. The instructions say to lay it out to relax for 12-24 hours. Well after 3 days it is still very wrinkled, am I missing something? Any tips on how to prepare this for a clean install ?? Any help would be greatly appreciated. Thanks

This is a great show, in a great little town that time forgot. I think this is the 5th year for the show with a great turnout each year. They have a Beer garden, food court, all restaurents open. The Date is : This Saturday June 18th The Time : Show starts at 5:00pm Registration: Starts @...

Does anyone know if anyone makes an "add a fuse" for our glass tube fuses? I've used these on my modern cars with good results. Thanks in advance.

I'm having a very hard time locating the PCV valve grommet for the Mopar Performance Valve covers. I'm told that only the Mopar Performance ones fit correctly. Can anyone tell me the best place to find them? Or even the dimensions of them ? Thanks Tom

I'm looking for a pvc grommet for the aluminium Mopar Performance Valve covers. I'm being told that due to the thickness of the valve cover only the Mopar Performance one will work. Any Help will be Greatly appreciated!! Thanks Tom PS: valve covers are at Phoenix Specialty Coatings awaiting...

Hi, I'm going to be putting a set of Mopar Performance valve covers on my 340 with an LD340 intake. I'm being told I'm going to have to notch the valve covers to seal them. I was wondering if a thicker or double gasket would solve this issue without notching the valve covers. Has anyone tried...

I'm running a 340 with an LD340 intake, I'm being told that if I go to mopar performance valve covers I'll have to "notch" the valve covers. Does this cause any issues with getting a good seal? Has anyone else run into this? Thanks

I'm looking for a oil filter relocation kit for my Demon 340, Any suggestions on a good kit??

Since I added a volt gauge to my 72 Demon 340 I noticed my voltage at Idle is @ 13.6 v. Now my question is as I accelerate the voltage climbs to 14.9 or so. Is this normal? as I back off the voltage drops again. Should I be concerned about this ? Thanks Tom

Hope this is the right place to post this. We recently finished my Demon, Body and Paint. Now the question I have is what is the best way to clean the engine compartment? It is mainly body dust and very light grime nothing major just hard to reach. I already blew out as much as I could with air...

What is the I/D of the hose that runs from the air cleaner to the PCV valve on a 72 340. I would measure it but I'm at work and wanted to stop on the way home pick it up. Thanks PS: it's the stock trap door air cleaner.