Search results for query: *

I will be firm at a 1000 for a while on craigslist.I'am moving to a smaller place need to make room otherwise I'd hang on to it.

Really don't want to ship.Will try craigslist first.

Thanks for the info.If that can't be the letter F It almost has to be an E by the looks of it.I have had this motor for years going to try and sell local for a $1000 STD block crank and pistons.I also have Xheads intake,exhaust manifolds timing cover oil pan carb for sell also.Thanks again for...

The #'s 9F136794 and the date 9-10-68 is the center number the month?

Thought I would post before I sell this standard bore 340 locally in case someone is looking for this motor. Not sure what it came out of if someone knows let me know thanks!

Sorry called my friend he bought a new 70 Swinger and he said round ball shift knob!I thought it was pistol but wrong!!

Yes they had Pistol Grip in 70 Swingers but no console.

Looking for a set of these. I was told the 68 69 70 340 covers all had the 4''wire loom shield on the passenger side.I don't see that on yours which might mean there 318 covers.

We couldn't get any pedal all. Your on the right track by getting them bled with the block good luck!

A friend had a similar problem, Found out he had the front calipers on wrong right and left causing the bleed valve not to be completely at the top causing air pocket.

I have a 70 340 Swinger, When I bought the car it was untouched and original with only one horn is this possible or is it missing I see the wire for the other horn. If its supposed have two are they matched or Hi and Low Thanks in advance.

Double checking before I start troubleshooting.To check for alternator charging I can put meter on battery with motor running unplug field wire and jump field to neg side of battery to make alternator charge correct? If its charging then go to regulator not sure how to check that? Everything is...

Well learning a lot.Looks like I need to know what 69 covers look like! Thanks everyone.

The Vin is 9F136794 so a 69. What does the F stand for?Thanks

Looking for a correct picture of 68 340 valve covers.I know 68 69 70 are all different. Going to start looking for a good set but need to know what I'am looking at.This 340 I have is dated 9-68 maybe I need 69 covers? thanks

Yes But I was wondering what the original fastener look like.

1970 Dodge Dart spare tire stowage question. I'am looking for the correct wing nut that holds the spare tire board in place.I don't know what it even looks like.Any help or pictures would appreciated.Thanks.. [ATT

70 340 AVS #4937S with Curb Idle Solenoid. Fair Condition. 225.00 Plus Shipping 98023

I have bucket seats and the material is two tone Gold from what I can gather. Legendary doesn't seem to make covers this color.Can anyone tell me who else I might try for a full set of covers. Again 1968 GTS.Trim S6N Thanks..

Trying to find correct seat color. 1968 Dart GTS Fender tag says under trim S6N can someone decode for me? Thanks in advance.

Trying to find out if my stock 1969 727 340 torque converter is the same as a stock 1969 727 318 torque converter both steel cranks.I have been told the stall is different between the two?

Just checked mine the bleed screws are outboard on both.

Where did you find this bracket?

Also whats confusing is your covers don't have the extended spark plug wire bracket on the rear drive side to keep wires off the HP exhaust manifold?

Thanks for showing these! I have heard a couple different stories on these 340 covers.I see your covers have the bracket on the inside of the passenger cover that protects the wire loom from the heat of the intake, Because the 340 intakes were higher then the 273 318. Was told that the 68 69 70...

Are these stock 68 340 valve covers? I know what the 69 70 looks like,68 69 70 are are different correct? If not could someone post pictures of correct 68 ones Thanks !

Friend had kind of same problem,We were really scratching our heads. The problem ended up being the front calipers were on wrong causing the bleed screw not to be up at the very top witch caused us from not getting all the air out of the caliper. They can be installed wrong front to back of...

Thanks

Need help on what this my be?Under dash Wiring 70Dart Thanks in advance!

I was having problem with leak in same area.Mine ended up being the back of the valve cover couldn't see it running down on the filter just something to check good luck.