Search results for query: *

I've got a pair of Lower Control Arms I'm trying to find out what make of Mopar & year they fit. The number that I've found on them is 82459 stamped on the side. They do have the sway bar attachment. Can anyone help me with my search? I'd greatly appreciate it!. Here's a picture of them...

I had a very similar problem on my 340 engine ........... I drove it for a while and finally got tired of trying to figure it out ......... took it to a really good Mopar mechanic and had him look it over ........... my problem (in my situation but caused the same symptoms) was the carb linkage...

I've read about 23 different posts about the OD tranny's. I'm still a little confused:?: ......... some of the questions I had were answered and some left me still wondering so I'm going to see if I can get a more specific answer if possilbe on some of my concerns. First ** I've got a 904...

I had a similar problem on my 73 Duster........when I turned the wheels mostly to the right, the tire on the drivers side would barely rub the fender. After I had the restoration completed on it this past summer, I talked to my body man about the situation (after replacing the fender on the...

Need pictures.....!! Good luck on the resto. mtn_jake

Nice for an 'off brand' .......... NEVER owned a GM product....... I LOVE MY MOPARS!!! My 2¢ worth Greg.......mtn_jake

Here's a link to mine before and after and finished!!......: http://picasaweb.google.com/mtnjake

I know what you mean about doing the work yourself. I did a lot of work myself......that I knew I could do.....I had so much invested in the car before the body work, I didn't want to ruin it with my limited knowledge of doing it and messing up something. I did go to the body shop very...

I'd also like to see those pics..........you've got a lot of ideas and hopefully a lot of the $$green$$ to go along with it. Keep us posted. Greg......mtn_jake

I had tried to take mine apart and tired all sorts of ways to get them apart but to no avail.......I ended up doing like 1badgts had done......except I used a sand blaster and got the rust off then spraying them with rustoleum primer (couple coats) then sprayed a couple coats of semi gloss...

OUTSTANDING isn't even close to describing the car!!!!!! Also like someone else said, "I love it except for the fact that it's your's and not mine".........I'll also have to just settle on my 340......maybe someday build another motor........Again I say OUTSTANDING!!! Forgot to say that it was...

They were all great!!!!! I kinda liked #10 the best........ just the thought of the guy loading his gun and the other trying to get away.......before getting 'wacked'. Greg......mtn_jake

Try this item number on ebay........ 320121731274 See if it is what you are looking for. Hope it helps. I've ordered stuff from these people and they make some good stuff. A little pricey but when you need it.......what can you do?? Good luck. Greg........mtn_jake

Had the same problem with the painting on my 73 Duster......mine was kinda yellowish and orange. My body man, used some good quality spray undercoating (with a plastic tube attached) to help cover the old colors inside there then made sure that he got ample color when he was doing the body. I...

The car looks great! I know what you mean about being reluctant about doing the body work and the search for parts is at times a real pain.......especially to find the right stuff at a decent price. It's like most places want a premium for their parts. Anyway, they know that they will get it...

Thanks for the compliment. If I can help out, let me know. Greg...........mtn_jake

Looks good.......!! It looks like a long ways to go also. But it will be a great experience and lot of fun during and after the restoration.....I'm sure....been there just finished!!.....whew! A lot of work. If you need any things that I may have from my project, let me know (my email is...

I forgot to mention that ........... yes, the ones I used were from Competition Engineering. Also, I found the install sheet for them and it does state to support the vehicle from the frame (front & rear). Hope this additional info helps. Greg......... mtn_jake

I really didn't notice anything peculiar after the install. Don't really know what you mean by 'egg shape'.....sorry. I had read somewhere which way to do it.....don't remember where I had found that. I just suspended the car on floor jacks on the rear axle and on the front portion of the frame...

Here's a link to a picture of what they look like under my duster. I've got a couple more that may show them better if you want. I can email them if you pm me with your email address. Hope this helps. http://picasaweb.google.com/mtnjake/1973DusterRestoration/photo#5106021317417283602 It...

Not much here in SW Virginia either..........mostly the way to find something is to travel the back roads and look.......sorry no help here. Greg........mtn_jake

I've been looking at many of the links to sites that offer 'wax systems' and these may be very good.....but spending a lot of time rubbing, whipping, cleaning, feeling, polishing, etc.......... I'm finding that there are many opinions and some of these waxes have been recently invented, some...

Southwest Virginia here. Mopar's seem to be few and far between in our area also. Mostly Chebies & Bords........(You know what I was spelling.....LOL). Greg...........mtn_jake

Thanks for the info. I checked the site out and want to see if there are other suggestions pretaining to my quest of a good wax for clearcoat paint. Thanks again, Greg........mtn_jake

As some of you might remember, I had posted pictures here of the progress of the restoration of my 73 Duster (link to the finished product::: http://picasaweb.google.com/mtnjake/1973340DusterCompleted My question is....... What is the best wax to use on the clearcoat finish?? Something...

I personally would recommend headers from TTI (Link) http://www.ttiexhaust.com/ Yes they cost more but well worth it. They were a breeze to put in. I had gotten a few scratches on them by 'dry fitting' them (seeing where they will hit, if at all, any problem areas to encounter, if any......)...

Vote made for best car............of course the Duster!!! :wav:

I have somewhat the same situation. I checked my vacuum the other day and with the car in park and idling at about 700 rpm's I was only gettng around 6-7 in's of vacuum. My cam I purchased was thru Edelbrock I also added 1.5 ratio roller rockers.......the specs are in the attached file Is the...

Why not just put a good set of Air Shocks under the rear.....put it where you want depending on the amount of weight you have at the time. Back in the old days, it was the 'fad' to see who could get away with having their car jacked up the highest without getting a ticket from the local state...

I realize that this is about weld in frame connectors but I installed the bolt in ones from Year One and they made a world of difference in the handling of my 73 Duster. It used to kinda wander all over the road till in installed them. The link to the ones I used is...