Search results for query: *

Sorry all, been dealing with kidney stones! ouch!!!! Pushrods have sale pending. Thanks

I think the voodoo 250 would work well with street gears and the od. If you have more than 3.55s i think the voodoo 256 would be great.

hughes valve spring setup allows .520 lift on magnum heads without machining. My heads showed the could go .543 with these parts. like to sell as kit, all parts are new. Hughes 1110 springs, Hug1278 retainers hug1307b keepers hug3806 valve seals crane 36655-16 rocker arm conversion kit. $300...

Thank you!!!! Zero added, and yes that is the link.

New TCI rebuild kit 129000 for 62 up tf904, mopar, dodge, plymouth, chrysler. Also comes with 5.0 kick down lever, new metal piston , hardend pump gears. http://www.tciauto.com/tc/904-pro-su...t-1962-uphtml/ $150 firm

Howards hydraulic flat tappet cam. Lobes are designed to take advantage of mopar .904 lifter. Cam would be good for a blower or turbo. Will work well N/A also. Specs are 226 at .050 intake and exhaust. .520 lift with 1.5 ratio rockers. Ground on a 114 lobe seperation with a 110 ic. Cam will...

$110 each!

Converter is sold!

Hi, yes parts are still available, minus header and t4 flange.

Sorry been sick. its the 2800 to 3200 model. I will sell for $375 shipped, in the lower 48. That is for the tci rebuild kit. Road runner converter, hd pump gears. Piston, ,5.0 lever. Will seperate converter, and rebuild kit. Pm me.

just the cams.

New TCI rebuild kit 12900 for 62 up tf904, mopar, dodge, plymouth, chrysler. Also comes with 5.0 kick down lever, new metal piston , hardend pump gears. Low mile 10" roadrunner converter stalls around 3000 (tight) behind a healthy 360. Has antiballon plate and hardened snout. $350obo...

1 howards hydraulic flat tappet cam. Lobes are designed to take advantage of mopar .904 lifter. Cam would be good for a blower or turbo. Will work well N/A also. Specs are 226 at .050 intake and exhaust. .520 lift with 1.5 ratio rockers. Ground on a 114 lobe seperation with a 110 ic. Cam will...

Cam still for sale. $115!!! Will do $460 for the turbo, wastegate, v-band, line kit, fpr, hat and coupler.

I really like the lunati voodoo 262. works very well with manifolds, has a nice sounding musclecar idle, but not rough. Has shorter duration but has the similar lift as the xe274 so shouldnt have any valve train problems.

What Stall converter? If stock or close to stock converter the voodoo,262 will work well, if you have close to a 2500 stall, then the voodoo 268 works really well. the 262 has a mild idle with a little burble. The 268 has a noticable idle.

Cam sale, pending.

New Emusa GT45 Turbo new 60mm wastegate. braded feed and return lines, AN hardware. Exhaust v clamp. t4 weld on flange. Turbo hat 4" inlet for 4bbl carb, 4" to 3" silicon coupler Used Mallory 4309 boost referenced FPR $500 firm for above $120 for cam Flanges are sold.

Hi all, my plans have changed again. so selling off some stuff I have for my 360. Anyways its a good start to a turbo kit. New Emusa GT45 Turbo new 60mm wastegate. braded feed and return lines, AN hardware. Exhaust v clamp. t4 weld on flange. Turbo hat 4" inlet for carb, 4" to 3" silicon...

if overdriven the supercharger can make about 330 to 350 hp. It would work well on a mostly stock 273 or a low rpm 318. It is rated upto 5l engine. I think it would work awesome on a slant six though.

Cam $125 $175 for the supercharger $45 for the flanges. Also have pro comp rpm intake New $130

Will sell cam for $130 Supercharger $200 Flanges $50

Custom Howards hydraulic cam custom cround for a turbo aplication. Specs are 226 at .050 intake and exhaust, 114 lobe seperation on a 110 ic. Lift is .525 int and exhaust with a 1.5 ratio rocker, .560 with 1.6 rockers. Cam is new in container. $145 I also have a low mile M90 supercharger from...

http://www.competitionproducts.com/Howards-Cams-Rattler-Hydraulic-Flat-Tappet-Camshaft-Chrysler-SB-LA-227_235-050-480_488-109-LS/productinfo/718001-09/#.VZV57vlVhBc

Heads are sold!

Did you get the pics of the rockers? Crane magnum rocker stud kit http://www.summitracing.com/parts/crn-36655-16/overview/ new but installed on head, $80 Procomp magnum intake new $125

Will sell the heads, without the stud kit for $1000

Will sell pistons and rods seperate. $450 for pistons and rings $300 for rods $725 for piston rod combo. Thanks

Im not sure, I got them in trade for a bunch of ford 2.3 parts. If you know how to tell let me know!! thanks

Hi all, I have a set of new probe forged pistons 14cc dish. .030 for 360. http://www.summitracing.com/parts/pbp-12351-030/overview/make/dodge scat 6.123 rods, new in box, http://www.summitracing.com/parts/sca-26123 JE pro seal file fit rings, http://www.summitracing.com/parts/jep-s100s8-40305...