Search results for query: *

Thanks for the info. Photo showing current status. 64 Dodge GT seats are going to the upholsterer and slant 6 is in the machine shop. 4 speed completed by Passon. Wirelooms are at M&H Wire Fabricators etc. Getting back on the floor boards.

Could someone provide photos of the tailgate release rod? Mine is broken on the end and the other side is twisted. Not sure how a non damaged one should look like. I will need to fabricate a new one or do some creative welding. Photos are of the original rod that I removed.

Where are you at?

Do you have a photo and how much are asking for it?

Hey Rah Rah. They are not the same. I just got off the internet and looked at some photos. The Lancer is a single blade arrow head and the valiant is a dual blade. The valiant will look like a "V" rotated 90 degrees and slide in to the upper and lower moldings.

Not sure. I will swing by my shop and take a photo of the side molding and get some dimensions. I may need 2. The guy who had the car before me put all sorts of different stuff on it from different cars.

Hi. Thought I would log in and see what is going on in the Mopar world. Bought 2 new 24" monitors for at home and wanted to try them out. Hope the wheels work out for you. let me know if you want me to haul the wheels form the Spring Fling. Will not be a problem.

Wish the posting was current. I sure could of used the arrowhead molding at the front of the car.

Picked up this 62 Valiant Suburban a couple of years back. Do not know what to do with it yet. Slant 6 225, 4 bbl Offenhauser with Carter 400 CFM, A833 tranny and 8 3/4 rear. Door has been replaced since photo, fairly rusty but came with a lot of extra pieces.

There has got to be more than 3 in the USA maybe 4 with mine. Keep them coming!

I was hoping to see a white with black vinyl top. Lo and behold there it is. I am moving in that direction. Blue and a black top is another choice, but I have that already on my 69 SS Camino It was previously white with black top, but at the time I had so may white cars and wanted to do...

With vinyl tops, I am finding the notch's lines are accentuated with vinyl. The yellow and black are complimentary. Too bad some of my buddies are not into vinyl. Yours looks great!

Curious to see what you guys have in the way of vinyl top 2nd generation Barracudas. I have two 1967 notches and restoring one that originally had a vinyl top. Would be great to see photos of your ride. Thanks nut4vintage

In high school there was one kid who was a real jerk. Drove a VW bug. In those days there were the old metal galvanized trashcans located around the parking lot. A bunch of us guys got together, flipped the trash can upside down and placed the car on top of the trashcan. He got the point and...

Thanks Sedanman and S340 for your quick response. I like that the Lord product specifically states "hood panel to supports" in their cut sheet. Whereas 3M does not. Will move in that direction. Thanks again

Has anyone replaced the hood caulking between the hood brace and hood skin. The 1967 Barracuda body that I am restoring is in prep and the cauling has shrunk causing major tsunami waves. I contacted 3M concerning their NVH (Noise Vibration and Harshness) Dampening Material, but they would not...

Hood Caulking Question. Has anyone replaced the hood caulking between the hood brace and hood skin. The 1967 Barracuda body that I am restoring is in prep and the cauling has shrunk causing major tsunami waves. I contacted 3M concerning their NVH (Noise Vibration and Harshness) Dampening...

Maintain the dark theme. Better if you could get the stripe to match the vinyl top color. If the hood is painted black even better with the black stripe. Could redo the top in black instead of the dark green or redo the top in white than a white stripe would look best. use colored paper and...

autoxcuda. Even got pics of your car. Thought I saw it in Santa Ana a while back. Picked up NOS tail pipe tips, LD4B intake, bell hosing, Hurst shifter handle and some other flotsam and jetsam to hang around the shop. You posted "Fall Fling XIX April 11 & 12, 2015" should that read "Spring...

Had a good time and bought quite a few parts. The show seemed to have less attendance in regards to cars as compared to last spring. However, spectator attendance is a lot higher. Noticing that parking gets filled fast outside of the show. Regardless, makes for nice day and the weather was...

Does it have a manual transmission? Cannot tell by the photo.

Yes, replied like there was no tomorrow prior to mailing the PO Money Order and nothing after one response - from a follow up inquiry. "Check the mail" he said. Yeah right! Check the mail, make the deposit and slither away.

Yeap I got ripped $190.00 from 440magnum - posting was "1967 Barracuda headlight bezel. Driver side". Time to inquire 1st. Maybe the site could maintain a list of so called members who are scammers. A spreadsheet of some sort. Establish a network of folks who live in the proximity of these...

Ahhh! That last picture was what I was looking for. The brackets look to be located at the same points and the conversion should not pose any real problems. Little nip and cut here and there. Thanks 6pk and SSBA, appreciate you guys taking the time to respond. One of the guys at work has a buddy...

I guess I opened a can of worms. All I have for reference is the aftermarket manual transmission conversion panels. These 4 speed tunnel panels look like they set to the left of the tunnel and not the center. When I view the aftermarket photos the shifter is offset to the side and panels are...

By the way FABO members if you need 1967 Barracuda reference photos because you dissasembled something and forgot how it goes togther, PM me with your e-mail and I will send you photos. I have done numerous restorations and catalogue/document the disassembly and reassembly process with photos...

Yes, I will be doing the items you outlined. The manual tunnel is a lot diffrent than the automatic and per your comment fitment is different from car to car. I am installing an A833 4 spd. and currently gleaning for parts. I will retain the automatic for now until I get the body work completed...

Does anyone have photos of the transmission tunnel for a 4 speed set up in a 2nd generation Barracuda. I am looking for OEM photos with cars that were optioned with the 4 speed console. Photos of the console removed. I pulled the console from my floor shift automatic and there are several...

Curious to see a girl with heels and owns a Cuda. Nice Pic. You were checking out the slant 6 intake and the picture looked cute. Thought I check it out. Any way I assume your car has a /6. I am in the process of doing a full write up on the restoration of the 67 Cuda pictured in my avatar. I...

Photos of Header Panel for 1967 Plymouth Barracuda. $75.00