Search results for query: *

I have a set of aluminum redline hub caps for my 69 in need of restoration. There are a couple of dents and some scratches. Curious if any has any tips for the resto. Thanks in advance

I'm looking to purchase new headlight switch, wiper and hazard bezels for my 69 project, I've hit a road block on the repop suppliers for that listing. Im thinking they are the same as 70-72 Dart , but not 100% . Any help would be appreciated.

A shot in the dark, but if there is an answer out there here is where I'll find it. I'm looking for anyone with a 69 Dart B-3 exterior, I'm restoring the interior to as close to original as possible. According to my broadcast sheet the upper door frame is B-7. I've purchase paint from Classic...

I'm in the process of restoring the interior of my 69 Dart, the exterior will be B-3 and the interior B-5 as original. Question is is there a resource to determine what items get painted which color, obviously there weren't all the same shade of blue ( door cards , dash pad, center console...

I have a 318 in my 71 Dart, I swapped the cam to a step above stock, Edelbrock intake and headers. The bottom half is stock. I am considering a head swap but with the pedestrian 8.5 - 1 compression ratio I want to select the proper cylinder head to not decrease the compression ratio further...

I'm contemplating painting steel wheels for my 71 Swinger black rather than body color (GY8) and use the original dogdish caps. Post your pics to help my decision. I'm not crazy about the ralley wheels, if you run 14" SBP you will understand.

I'm converting the front brakes on my 69 Dart from 9" drum to Kelsey Hayes disc set-up and 8 3/4" 10" drums on the rear. I'm looking for the correct master cylinder and proportioning valve. Anyone have this setup and had resourced these parts? Any help is appreciated.

Curious if anyone has made a run/break-in stand, I'm looking for options. Im making this stand now, for a 360 I'm building for my 69 Dart. Everything is adjustible the motor mounts adjust, the only thing thats specific is the holes for the bellhousing I have unistrut with spring nuts for...

For the past couple of weeks I have disassemble the suspension on my 69 Dart, detailing everything in the process. It left me with an issue I solve this morning, thought I'd pass it along to maybe help someone else. Shes mobile again!!

Has anyone here widened a steel wheel, either cut and band or take the center out and transplant it in a wider wheel. Stockton Wheel and The Mopar Dude did, not sure if they still do. I'm a Union Sheetmetal fabricator and have access to equipment to achieve it, just not sure if it safe to do. Thanks

WANTED: 14 " × 5 1/2" SBP steel wheels for my 69 Dart project, planning on painting them the body color and using dog dish hub caps. I'm in upstate NY, so the closer the better to alleviate having to ship. Thanks

I'm in the process of restoring my 69 Dart , starting the suspension and brake system with an original Kelsey Hayes 4 piston disc system. When I dropped the LCA's I noticed how much slop there was so I fabricated stiffening plates to help alleviate the slop. I modeled my plates from aftermarket...

Hi all, I picked a PST swzy bar several years ago at a swap meet without installation instructions. I was curious if anyone has pics of their install, or a set of instructions. Thanks in advance.

I'm upgrading the brakes on my 69 Dart, from drum brakes to Kelsey Hayes 4 piston disc. Any suggestions on a master cylinder and propositioning valve I've seen that the rear sump needs to be larger than the front, for disc setup but I'm not 100% sure. Any help is appreciated

Does anyone have a source for a complete wheel bearing kit for a 1969 Dart disc brake setup, it's for a 4 piston K.H. Thanks in advance

Does anyone have a source for replacement rotors for a 69 Dart. I recently picked up a 65- 72 small bolt pattern disc brake set up and am need of replacement rotors. The package I bought included the KH 4 piston caliper, which need to be rebuilt, spindles, dust plates and rotors with the hubs...

Does anyone have a resource for a horn relay for a 71 Dart part # 3513211 or an alternative, Originally it was horn \ key in buzzer relay, don't care about the key in relay but would at least like the horn to operate. Thanks in advance

I'm in the process of restoring a 69 Dart and not having any luck locating the attaching clips for the trim panel for my deck lid. Anyone have any luck locating these. Thanks in advance.

I'm in the process of restoring a 69 Dart, the exterior will be B3 blue as original and I'm interested to see interior color options from the members. The original was B5, but I'm looking to change to either white or Black on the buckets and door cards. Post pics if you have them.Thanks in advance.

Curious if anyone has had any experience with paint to restore an automatic console trim (silver) on my 69 Dart project. I've done some searching to not avail. The console trim I have is in decent shape, not perfect but beats replacing for new repo at $600.Any ideas?

I'm looking for interior panels for my 71 Swinger. Heater/ Radio filler between controls and glovebox trim to match my current instrument cluster and heater controls/ radio bezel.

I'm looking for someone to help identify my dash bezels. I'm looking for matching glove box door trim and the filler between the climate/radio bezel. It's not woodgrain, like typical. I'm having trouble finding the bezels to complete my interior. Thanks

I'm looking options for my 71 Dart 318/4 bbl with dual scoops and fresh air holes in the hood. Does anyone have pics of their setup or suggestions so I can make the scoops operational. I'm currently using an air cleaner from a 360 I had.

I'm looking for the clip to attach the finish panel on my 69 Dart truck lid. Hopefully someone knows of a resource for the proper fasteners. The picture is of my panel. Thanks

I recently purchased a bulge hood for my 69 Dart project. I got it cheap, knowing it needed work. Under closer inspection I found that the hinge mounts need to be replaced as well as the hood latch area. Is the a source for the inner structure for the bulge hoods or should i cut my flat hood to...

Hi, to anyone that may help. I recently purchased a 318/727 combo from a 68 C body Plymouth fury. Curious if it will fit my 69 a body dart. The Dart currently is a 225/904. Thanks Steve