Search results for query: *

  1. elvaliant66

    Dash Cap

    Bump
  2. elvaliant66

    Dash Cap

    related to dashes and dash pads. Anyone know why the factory went from a solid steel dash(excluding the bolt holes for the dash pad)to a dash with cutouts from 73+. What is the purpose of the cutouts? Cost saving on materials? Faster productivity on the assembly line?(easier access for mounting...
  3. elvaliant66

    Dash Cap

    This thread is old but thought I’d reply maybe it will be helpful to someone . I just did this job this weekend so it’s still fresh in my mind lol. No need to remove the windshield. Just your seat , radio , gauge cluster and heater vent hoses ..that makes it way easier! I suggest a 1/4” drive...
  4. elvaliant66

    [WANTED] 68-74 small block a904

    Appreciate you looking . Cool,I’m hoping to find one at the spring fling if nothing comes up from now until then .
  5. elvaliant66

    [WANTED] 68-74 small block a904

    Cool ! I will keep it in mind I was hoping to find one with the converter as well tho.
  6. elvaliant66

    [WANTED] 68-74 small block a904

    Looking in the SoCal area for a used running ’68-’74 a904 small block transmission with converter.
  7. elvaliant66

    Magnum oil pump

    Nice! I usually just smear some assembling grease on the pick up to check fitment .
  8. elvaliant66

    Magnum oil pump

    Yep! It should be touching . My issue was the pick up tube was screwed on the tightest while still being orientated the way it should be on the pan but the pan rails were about .5 inch away from mating to the block hence why I bent the goose neck on the pick up tube. Now the P.U tube sits flush...
  9. elvaliant66

    Magnum oil pump

    I did have to bend the pick up tube just a little at the goose neck to make it fit just right.
  10. elvaliant66

    Magnum oil pump

    I used the new melling oil pump with the original pick up tube it came with and will be using the a body oil pan it came with as well.
  11. elvaliant66

    Magnum oil pump

    I believe the oil pan is a replacement . The previous guy that I bought the engine from had it in his 68 barracuda .I matched the oil pan to another 72 LA block from a Dart and the oil pans are essentially the same . I was able to get the new pump on and used the pick up tube that game with the...
  12. elvaliant66

    Magnum oil pump

    Nope, It’s got a A-body small block oil pan. It’s going into a ‘67 valiant
  13. elvaliant66

    Magnum oil pump

    I did a fitment test with the new pump and original pick up tube that came with the magnum and I also tried the old pump with original pick up tube it still hits the pan just barley right before all the bolt hole rails mate to the block. I also tried the new oil pump and old pick up tube off of...
  14. elvaliant66

    Magnum oil pump

    I tried replacing the oil pump with a new one .melling #m-72 . When installed the oil pan would not sit flush and kinda hits the oil pick up tube . It’s on at the tightest and sitting leveled. When the original pump is on it sits flush . I cross referenced the Oil pump (M-72) and it pretty much...
  15. elvaliant66

    “PermaDry”Timing cover gasket

    I found that silicone/steel gasket when I searched up ‘99 magnum on the oreillys website. I thought it would be the same to a ‘94. It had me scratching my head a bit. Do the later magnums have a different oiling system/passages? I’ve seen other threads where they mention drilling a hole in...
  16. elvaliant66

    “PermaDry”Timing cover gasket

    Sweet thanks for the oem part #. Yea I’m sure it will be fine with the blue one I just thought the gasket it previously had was neat because it came off in one piece and there was essentially no gasket scrapping/clean up just took a wipe down on the block and timing cover. I found one online...
  17. elvaliant66

    “PermaDry”Timing cover gasket

    Prepping the magnum engine. On tear down I noticed the engine still had “oem” gaskets.the timing cover in particular ,I’ve seen paper/composite gaskets before but the one it had was a pretty thick silicone/ metal gasket. I’ve ordered the gasket set from scram speed but it came with a paper...
  18. elvaliant66

    [WANTED] 67-74 4 door glass

    Looking for a replacement window for a 4 door driver side rear door . Shipping would be to 91006 CA
  19. elvaliant66

    [WANTED] 1974-76 Valiant/Duster valance

    Thanks for that info! Didn’t know 75-76 were different numbers
  20. elvaliant66

    [WANTED] 1974-76 Valiant/Duster valance

    Disagree. Front has both a metal valance and a bumper filler that screws on to the valance . The rear only has a plastic/rubber filler .check your car I see you have a picture of one as your profile picture .
  21. elvaliant66

    [WANTED] 1974-76 Valiant/Duster valance

    Rear has only bumper filler (plastic/rubber). The front has a valance (steel) and the bumper filler (plastic/rubber)screws on to the valance . Will provide a photo asap.
  22. elvaliant66

    [WANTED] 1974-76 Valiant/Duster valance

    Looking for 74-76 valiant/duster front and rear valance as well as front and rear filler panels . Shipping would be to 91006 CA
  23. elvaliant66

    MOPAR BLAZE IT!

    MOPAR BLAZE IT!
  24. elvaliant66

    [WANTED] 1974 abody under dash harness

    Looking for a 1974 a body under dash harness in fair condition not all hacked up . Shipping would be to 91006 CA
  25. elvaliant66

    [WANTED] 1974 valiant tail lights

    Not sure why it says full I just deleted everything in my inbox
  26. elvaliant66

    [WANTED] 1974 valiant tail lights

    Nice! How much are you asking for the pair? Shipping would be to 91006 CA
  27. elvaliant66

    [WANTED] 1974 valiant tail lights

    Got the pictures . How much are u asking for that tail light?
  28. elvaliant66

    [WANTED] 1974 valiant tail lights

    Do you have any pictures of it? How much ?
Back
Top