Search results for query: *

Hello everyone I just moved to thunder Bay and am wondering if there any reputable engine builders in the area? I have 400 B that I would like rebuilt as I go into the final phase of my build but I can't seem to find much searching on Google

Did this sell or is it still available?

Still looking. This sits behind the dash and controls the heater box vent doors.

Still looking.

Thank you for checking!

I'm looking for a cheap pair of front fender braces for a '74 dart sport, the flat ones, stamped like small angle iron, approximately 14.5" long — example pics attached for reference. I have a shipping address in Minnesota (55768) and Winnipeg (R3G 2C9).

Looking for a dash vacuum actuator tubing harness for a '74 dart sport. See pics for details, mine was cut when I received the dash.

Thank you again! I get ya, PTFE... haha, I didn't realize the "T" stood for teflon. "on the cheap" means I have access to discounted QUALITY products, specifically some Russel PTFE 308 SS Braided hose. The parts are by no means cheap in quality, just a heck of a price cut. Sorry for the...

Thank you for your thoughts! I will have to research more on teflon lines as I'm not familiar. One of the biggest concerns I've read is that the braided lines allow for some expansion, creating a softer pedal and more travel before the brakes engage compared to hard lines. I have also read...

Forgive my lack of knowledge, but are there any concerns with forgoing the hard line from the rear distribution block on the axle to the driver side bracket, and just installing a one piece stainless steel braided line directly to the caliper instead? I'm putting all new brake lines into my 74...

Sale pending will update once I confirm one way or another. Thank you for the responses!

I'm looking for a cheap pair of structurally sound front fender braces for a '74 dart sport. I have a shipping address in Minnesota (55768) and Winnipeg (R3G 2C9). This is the brace that supports the lower front fender. Thank you for your consideration.

Thank you for your help!

Thanks a ton, I ordered one up today!

Thank you for all the information, I really appreciate it! I have replaced the tank, pump, and sending unit with a setup from Tanks Inc., so certainly not a factory-correct resto. - Fuel Tank, 16 Gallons, Steel, Galvanized (Mfr. Tanks Inc #: TCR11D-T) - Fuel Pump, 340 LPH, 100 Maximum PSI, Each...

Howdy, Does anyone know or have experience with a fuel filler neck from Classic Industries (part# MF46201) and if it will also fit a 1974 Dodge Dart Sport? They look very similar, but my knowledge is limited and the vendor wasn't able to offer much support aside from dimensions. I currently...

I bought this, everything fit together great: 1965-1974 Mopar A Body Firewall Mount Brake Booster bracket 1965-1974 Mopar A, B&E Body Firewall Mount Brake Booster bracket

Here is the setup I went with. Worked with Wilwood for booster recommendations. Speedway 8 in. Dual Universal Power Booster in Black Powder Coat Part # 91664079 Wilwood 261-13270-BK Alum. Tandem Master Cylinder Kit w/Bracket/Valve Part # 26113270-BLK

I went the route of comfort: - Firewall to bare metal - Rustoleum primer - Herculiner - Noico 80 mil car Sound deadening mat, Butyl Automotive Sound Deadener - Noico RED 315 mil (8mm) Noico was by far the the most cost effective and had great reviews both on this site and amazon. I've taped the...

Take a look at the product FAQ. It talks about new tanks and not needing a sealer, also mentions specifically that new tanks likely already have a coating and that factory coating would need to be removed first.

Thank you for your help! Much appreciated.

Interesting,it was like this when I got it. Makes sense now that I think about it,not being able to find any pics that look like it. Aside from cosmetic, are there any functional concerns? I suppose I'll start looking for options to replace or maybe an upgrade...

74 Dart Sport, factory steering column. When I mock up my install there is a gap as shown in the picture between the column housing and the support bracket. As it's been too long since I tore this apart, is this to be expected or am I missing something? Just making sure the housing isn't...

I bought them direct from AMD, still have the stickers that came on them with my receipts.

I used Herculiner, took about 2 gallons, $140. Of course lots of labor to clean prep, and I used a gallon of Rust-Oleum metal primer, I think that cost me 25$ at Menards. I made the mistake of doing it while my car was on wheels, laying on my back... Had to shave my head I got so much in my...

I really like how it turned out. Crazy how much it fades though from when I did the mid/rear vs the front. About 2 years in-between. As solid as you would expect a truck bed liner to be.

I'm just on my way out to the garage to do just that right now!! Then herculiner to finish it off.

Well, made the decision to go to a pro for some help as I just wasn't able to get the panel lined up the way I wanted, and given I have no experience doing this, really didn't want to mess it up. Results were amazing! Also had a skin out on the passenger rear quarter too. The body shop only had...

Rust!!! I cut it out with the old floor plans but haven't replaced it yet as I'm not sure what direction I'll go with the tranny. As much as I love the idea of the new Passing A855's, still not sold on that being a better choice than a new Tremec. That looks really good bye!! Nice work.

I'm just going through this process now too. Floor plans are in and I was thinking to use 3M's seam sealer both inside and underneath. Primer first, then seam sealer, then truck bed liner. If you seal the seams completely, would there be concerns, or does condensation still allow water to be...