Search results for query: *

  • Users: Frnknsteen
  • Content: Threads
  • Order by date
  1. Frnknsteen

    Radiator and cooling options

    Hi Guys, Wanted to check and see if I could get some suggestions on radiator and fan options. My Barracuda had an aftermarket radiator and cooling fan that just isn't cutting it. The main issue, I believe is that there is no shroud, so it isn't making full use of the radiator. The car is a '67...
  2. Frnknsteen

    Roof Rail Seal

    Hi Guys, Picked up some new seals and a new hood insulation panel for my Barracuda at the nationals last weekend. I've got the cowl to hood seal and the radiator to hood seal installed just fine. I installed new roof rail seals and I'm wondering if I have them in there correctly and how the...
  3. Frnknsteen

    Developed a tick

    Ok guys,.. I could use a little advice..... My '67 Barracuda has a '77 400 in it. I took it to a Cars & Coffee event last Saturday and noticed I had a little lifter tick when the car first started, but went away within a second or two. Drove it to the event and came home (about 20 miles each...
  4. Frnknsteen

    Finally,.... Slop in steering is gone

    Finally got rid of the excess slop in my steering on the '67 Barracuda!! When I bought the car, there was a ton of slop (excessive play) in the steering. We're talking dangerous slop! I replaced all the front steering components and still had tons of slop. Replaced the steering gear with a Firm...
  5. Frnknsteen

    Wiper Motors

    Ok, so I am a little confused on wiper motors, and am hoping for some help. I'm getting read to rebuild my instrument cluster for my Charger and I have two. One of them has the 4 position switch for a 3spd wiper, and one has the 3 position switch for a 2 spd wiper, so I have started looking for...
  6. Frnknsteen

    Heavy gas smell

    Hi Guys, Quick question.... I am getting a real bad gas smell after filling the tank and driving. I even had one time where I filled up the tank and pulled around (to the left) to air up a tire and there was gas running down from somewhere on the right rear quarter. It is a 1967 Barracuda. I...
  7. Frnknsteen

    Antifreeze leak on header flange

    Ok,.... Strange question.... I was replacing my leaking back up light switch on the 833 transmission in my '67 barracuda last night. I was reinstalling the inspection cover that I removed to clean where the leaking lube got between it and the trans, when I brushed across the pass side header...
  8. Frnknsteen

    A833 Transmission leaking at reverse light switch

    Hi Guys, I had my car on the lift recently and noticed quite a bit of gear lube on the bottom of the transmission and around the inspection cover. I pulled the inspection cover to look inside the bell-housing to see where it might be coming from and it was completely clean and dry in there...
  9. Frnknsteen

    Pitted Wheels

    Hi Guys, Need a bit of help here. I am thinking of doing conversion to big bolt pattern on my '67 Barracuda (discs up front, drums in back) from Doctor Diff, but can't afford new wheels and tires at the moment with my Charger project going on. $1400-$1800 for the conversion is enough at the...
  10. Frnknsteen

    Need Opinions. Have nothing to compare to.

    Hi Guys, I posted on this yesterday in my restoration thread, but thought it might make more sense to post here. I have a '67 Barracuda I am working on. My restoration thread will show what all I have done to it, so I won't repeat here. Basically, the motor was in it and running good when I...
  11. Frnknsteen

    Seat belts install

    Ok guys,... quick silly question.... I just bought new seat belts for my '67 B'Cuda and one side is retractable the latch side is not. Which one goes on which side. The car didn't have them when I bought it and has bucket seats with the 4spd coffin console. Another question,... Any suggestion...
  12. Frnknsteen

    Which steering gearbox is for me?

    Ok, so I need a little help deciding something. I need to put a new manual steering box in my '67 Barracuda. I have rebuilt the whole front end and tried adjusting the steering box and I just can't get the slop out of it. I've decided to replace my current manual steering gear with another...
  13. Frnknsteen

    Header Identification

    I realize this might be a vague question, but I am trying to identify what headers are in the car I bought. I know pictures would help, but it's kind of tough to get good pictures of them when they are installed. The headers in my '67 with a 400 4-spd are nickel plated and go from 4 pipes into...
  14. Frnknsteen

    Frnknsteen's '67 Barracuda

    Ok,... So I thought I would start a restoration thread for the '67 Barracuda I picked up, even though some of the work has already been completed. I have already determined that I kind of suck at documenting the work I have done with pictures. I'm finding that I get so focused on what I am...
  15. Frnknsteen

    Finally got my A Body!!

    I have been on here for a while reading and gathering knowledge. Always wanting to get myself an A-Body. I have a '69 Charger that is going through the rebuilding process, and drove a Plum Crazy Purple 2010 Challenger. Well,... I got tired of having to bring the Challenger in every time...
  16. Frnknsteen

    Wanted to say hello

    Hi, Just wanted to say hello. I don't actually have an A-body yet. I have a '69 Charger I am restoring, daily driver is a 2010 Plum Crazy Challenger R/T, but I've always wanted a '70 or '71 Dart or 67-69 Barracuda. My girlfriend loves the '64-'66 Barracudas, so I see us picking up an A-body...
Back
Top