Search results for query: *

  • Users: bb66cuda
  • Content: Threads
  • Order by date
  1. bb66cuda

    [FOR SALE] Clifford Slant six headers for high mount starter

    This is a pair of used Clifford slant six headers for use with a high mount starter. They were on a 73 duster for a while and are in very good condition. Part # 55-0010. Price is $350. I’m located in San Jose, CA.
  2. bb66cuda

    [FOR SALE] Mopar A body 8 3/4 housing

    This is a Mopar 8 3/4 rear end housing that has been narrowed to factory A body dimensions. Housing is 52 5/8” end to end and 43” centers on spring perches. Located in San Jose, CA. Can deliver to spring fling if needed. Price is $500.
  3. bb66cuda

    [SOLD] Mopar 8 3/4 housing A body

    This is a mopar 8 3/4 housing that has been narrowed to factory A body specifications. Has new seals, and perches at 43” center to center. Price is $500. Located in San Jose, CA.
  4. bb66cuda

    [FOR SALE] Edelbrock SP2 P318 manifold and Holley carb

    This is a SP2 P318 intake manifold with Holley carb. I believe the carb is a 650. Will probably need a rebuild. Price is $250. Located in San Jose, CA.
  5. bb66cuda

    [FOR SALE] 1975 A body bucket seats and buddy seat

    This is a set of bucket seats and tracks from a 1975 Scamp. The center buddy seat is also included and has the mounting brackets attached also. Will need to be reupholstered to be nice. Price is $600. I’m located in San Jose, CA.
  6. bb66cuda

    [FOR SALE] 1969 Valiant Front clip

    This is the front sheet metal from 1969 Plymouth Valiant. Included is front grill, metal support under grill, front bumper with brackets, both fenders, fender turn signals, hood latch anssembly and inner splash shields. All mounting hardware also included. Drivers side fender has a few dents...
  7. bb66cuda

    [WANTED] 70-72 Duster Hood

    Looking for a 70-72 Duster hood with or without dual or single scoop. Located in the Bay Area, but will be attending spring fling as well.
  8. bb66cuda

    [SOLD] Mopar A body 8 3/4 housing and LBP brakes

    This is a Mopar 8 3/4 rear end housing that has been narrowed to factory A body specifications. Housing is 52 5/8” end to end and 43” centers on spring perches. Housing has new seals. Brakes are rebuilt and are 11x3”. These can be used when converting to the large 5x4.5” bolt pattern. What is...
  9. bb66cuda

    [FOR SALE] 1975 Plymouth Scamp (not mine)

    1975 Plymouth Scamp with 318 just hit the Pick n pull yard in American Canyon, CA. It’s a pretty clean 318 car minus the driver side fender and door that was hit.
  10. bb66cuda

    [FOR SALE] 1965 Barracuda Formula S Body

    1965 Plymouth Barracuda Formula S body with extensive custom work done to it. This is just the shell as pictured, with all the glass included. Has a mini tub, subframe connectors, roof chopped 1 1/2”, C6 exhaust setup, and the list goes on. Does not have any suspension, engine or drivetrain...
  11. bb66cuda

    [SOLD] 1964 Valiant Wagon

    I’m selling my 1964 Valiant wagon. It has a 225 slant six with pushbutton auto. Has a 65 Barracuda grille and stripes on it. I drive it almost daily around town and engine and tranny run good. Has a few issues with the gauges and the rear window wiring or motor may be bad as the power window...
  12. bb66cuda

    [FOR SALE] 1968 Dart GTS trunk finish panel

    This is the trunk trim panel removed from a 1968 Dart GTS. It does need some work but is usable as is. $375 shipped or $325 picked up in San Jose, CA.
  13. bb66cuda

    [Found!] Pushbutton delete plate

    I'm looking for a pushbutton delete plate for a 1964 Valiant. I'll be swapping it to a 4 speed soon so want to get rid of the pushbuttons.
  14. bb66cuda

    [FOR SALE] 8 3/4 rear end

    This is a 8 3/4 large bolt pattern rear end from a 66 B body. Spring perches have been relocated to A body stock location (43"). It is 1 1/2" wider than a factory A body 8 3/4. Has new brakes and green bearings. Still needs drums and brake lines. Has an open 742 case with 2.93 gears...
  15. bb66cuda

    Ute rear window dimensions

    I'm hoping someone out here can help me figure out the rear window dimensions on an AP6 ute. I'm working on converting my 66 Dart wagon and would like to get the correct dimensions to have a piece made here in the states.
  16. bb66cuda

    [WANTED] 14” SBP rally wheel

    I’m looking for a single 14x5.5” small bolt pattern rally wheel. Prefer no tire on it if shipping. Located in San Jose, CA.
  17. bb66cuda

    66 Dart Wagon conversion

    This is my 66 Dart wagon that I am working on converting to a Ute. I plan on making it as close to the Australian model as I can, but there will obviously be some differences since I don’t have access to original parts. Roof on this wagon was very rusty, but the rest of the car is pretty good...
  18. bb66cuda

    [WANTED] Early A body 273 4 bbl kickdown linkage

    Looking for a kickdown linkage and bracket setup for an early A body with 273 engine.
  19. bb66cuda

    [FOR SALE] 2x A body 8 3/4 rear ends

    I have 2 A body 8 3/4 rear ends available. Both have narrowed housings to A body specs. One is set up for using large bolt pattern axles and is complete minus the axles and brake lines. It has a 2.76 open 742 case carrier and 11x2.5” drum brakes. This one is $900. The other is small bolt...
  20. bb66cuda

    [WANTED] Slant six 4 speed bellhousing

    I'm looking for a bellhousing for an overdrive slant transmission, part 3743643. Located in San Jose, CA.
  21. bb66cuda

    [WANTED] 68 Dart Hood Inserts

    Looking for a set of 68 Dart hood inserts.
  22. bb66cuda

    1974 Scamp at PIck n Pull

    There’s a 74 scamp at pick n pull Richmond, CA if anyone is looking for parts. Has a clean 318 auto setup in it. Rusty floors but pretty good body other than a crunched left fender.
  23. bb66cuda

    [WANTED] 10” A body drum brake hubs

    I’m looking for 2 pairs of 10” small bolt pattern a body drum brake hubs. Located in San Jose, CA.
  24. bb66cuda

    [SOLD] Mopar A body rear end

    This is a Mopar 8 3/4 rear end narrowed to A body specs. Housing is 52 5/8” and perches at 43” center to center. It is set up for running large bolt pattern axles with 10x2.5” brakes that have been completely rebuilt. New drums are also included. Has 741 open carrier with 2.76 gears. Just needs...
  25. bb66cuda

    [SOLD] 1973 Plymouth Duster

    I have a 1973 Plymouth Duster project car for sale. It is currently listed on eBay with no reserve. I'm located in San Jose, CA. Here's the link and description from eBay. There are more pictures on the auction. 1973 Plymouth Duster | eBay This is a 1973 Plymouth Duster still wearing it's...
  26. bb66cuda

    [SOLD] Mopar A body 8 3/4 housings

    I have 2 Mopar A body housings available. One is a factory housing (unpainted one) that has some damage to the bottom of the center section. The other is a narrowed housing originally from a b body. It’s 52 5/8” flange to flange and 43” perches. Has been media blasted and painted. Does not...
  27. bb66cuda

    [SOLD] 8 3/4 489 sure grip carrier

    I have a 8 3/4 489 case sure grip carrier with 2.94 gears. Came out of a 1969 Chrysler Imperial. Price is $650, located in San Jose, CA. Shipping is available also.
  28. bb66cuda

    [WANTED] SBP A body 8 3/4 axles

    I’m looking for a pair of small bolt pattern factory A body 8 3/4 axles. Located in San Jose, CA but willing to pay shipping.
  29. bb66cuda

    [SOLD] Ford 8.8 31 spline rear end for Mopar A body

    This is a Ford 8.8 31 spline rear end that has been narrowed to fit in a Mopar A body. Mounting surface to mounting surface is 56 3/8” and perches are 43” center to center. Has 3.73 gears with limited slip differential. All new brakes installed, new bearings and seals. Comes with factory u...
  30. bb66cuda

    [FOR SALE] A body 8 3/4 rear end

    This is a Mopar A body 8 3/4 rear end minus axles. It was was originally from a b body and has been narrowed to factory a body specs. Spring perches are at 43” center to center. Brakes are 10x2.5” large bolt pattern and have been completely rebuilt and have new drums also. Center section is...
Back
Top