Search results for query: *

I have a 1967 Dodge Dart GT. 273 2bbl automatic. I have a few questions. 1. Where is vin number on the radiator support? 2. My intake casting number is 3X19. What is the X? 3. I have no part number on my radiator but it looks original. Just 38086? Thanks for any help?

I have a 1973 Dodge Dart Sport 340. It has the factory 14” Rallyes on it. I am thinking of changing to steel rims, painted body color with dog dish caps. My question is what steel wheel do I need to buy as I have front disc brakes? I also have new tires so I will need to stay with 14” rims...

On a 1973 Dart Sport 340 with a factory in-dash gauge, will the factory temperature sending unit work with an aftermarket under dash temperature gauge? Thanks

Have a 1972 Dart with an early 60's 383 but there is no kickdown to the 727 transmission. Will not shift into 3rd. Is this a kickdown issue and can you buy a kickdown for this combination? Thanks

I have a 1973 Dodge Dart Sport 340. The only thing not working was the temperature gauge. I tested the gauge by grounding the push on plug and turned the key on. The gauge pinned to hot. Turned the key off and it went back down. I'm thinking that is easy, I need a new temperature gauge sending...

1973 Dart Jack Assembly. Other years or models may work but I don't know.

Do they make an affordable complete dual exhaust system for stock head pipes and not with headers?

Looking for a good exhaust system fitting to stock exhaust manifolds (not headers) and the chrome exhaust tips. The car is a 1973 Dodge Dart Sport 340. Would like to have Magnaflo mufflers and clamps included. Any ideas?

Can anyone tell me where I can purchase the repalcement in-dash tachometer sending unit board? Thanks, Al Barlow Maine

Does the in-dash factory tach on the ‘66 Formula S have a sending unit? My tach is not working.

Does anyone make any metal patch panels for a 1966 Baracuda Formula S? You can see my areas needing attention.

I have two questions that I am in hopes someone will answer. 1. Did the 1966 Formula S ever come with no stripe down the middle? 2. Did the Formula S ever come with these type of rims/caps? Thank You.

I have a 1973 Dodge Dart Sport and was wondering what the number 64 stood for in the Combination Groups section of my Broadcast Sheet. Thanks for any help.

1973 Dodge Dart Sport that has super low mileage, original body panels and original drivetrain. This was a two-owner car which was stored for some 30 plus years by the original owner. Hence the low mileage. It would be a perfect clone candidate or a keep it as it is and make it your daily...

I have a nice clean low mileage 225ci slant six automatic Dart. It runs excellent now. Would it be an improvement to install a 273ci 4bbl and an 833 4-speed?

Can anyone tell me where I would find, on the original broadcast sheet, the option code showing that the dual snorkel hood scoop was original from the factory and not added later. I do have a photo of the original broadcast sheet to look at. Thanks, Al in Maine

I am putting 15" steel rims on my 1969 Road Runner and need three dog dish hub caps like the one that I have below. I believe they are called 9" caps. They don't have to be perfect and I don't have tons of money to spend on them. Can anyone help me out? Thanks, Al Barlow Maine

I have a 1968 Dodge Dart GTS with the bent Hurst shifter and a center console. On the driver's side of the console there is supposed to be some type of curved piece that attaches to the console that you glue the carpet to and it covers the hole in the 4-speed tunnel. I want to fabricate...

Can anyone tell me what year(s) Dart GT these door panel inserts go to? Thanks, Al in Maine

I have a 1968 Dodge Dart GTS. Original 383 and 4-speed. I switched from a stock 3-finger clutch pressure plate to a diaphragm pressure plate (Center Force) and my clutch rod which is 7.5" end to end is now too short. Can anyone help me with the proper length and where/if I can buy one or a photo...

I have been 4- years restoring a 1968 383 Dart GTS 4-speed car. Now when I'm getting close to the end, my body man says I need an engine compartment wiring harness. Can anyone help? Even if it needs work I still might be able to use it. Possibly other years and other models will also work...

OK, after three years, I have the drivetrain in my 1968 Dart GTS. It's a 383 4-speed car. The engine and transmission are original. I thought the shifter mechanism and rods were too but now they don't fit. This is a console car with the round bent Hurst shifter. Can anyone help with the linkage...

I am stuck installing my Z Bar as I don't have the Ball Stud and Bracket Spacer that is needed for the 383 or the Fork Rod and Insulator. Can anyone help me??? Thanks, Al in Maine

Is it possible to have a true heater delete car if the H25 is not on the body plate or the build sheet? Build sheet shows 11 for heater. I owned the 1 of 1 1969 Dodge Dart 383 GTS 4-speed car that was purchased new in Hawaii. I had no build sheet but the H25 was on the body plate and I talked to...

Just wondering if there is any difference between a 1968 6-cylinder Hardtop body and a 1968 V8 hardtop body other than the K-member? Thanks

I wanted to purchase an emergency brake/parking brake cable kit. However the seller asked: "in order for me to process your order i need to know if your car has the intermediate or the non intermediate style emergency brake cable." I have a 1968 Dodge Dart GTS 383 with a 4-speed and manual...

NOS left front motor mount insulator with original box. Fits 1967, 1968 and 1969 Plymouth Barracuda and Dodge Dart as well as the 1965 Plymouth Fury. All with the 383 or 440 engine only. Excellent Condition. Republic Parts, Inc. Part Number on Box: 31-2270 Part Number on...

I need a bellhousing for my 1968 Dodge Dart 383 GTS 4-speed car. Part number: 2536945 Casting Number: 2468372 Thanks for any help you can give me. Al form Maine

I have the original 2898033 22" radiator for my 1968 Dodge Dart 383 GTS. However, it needs to be restored. Can I buy the side frame pieces or do I need to have them made as they need replacing. Thanks, Al in Maine

When I purchased my 1968 Dodge Dart GTS, 383 4-speed car, I received tons of parts with it. It came with two sets of interiors. I want to keep the best buckets and rear seat. They seem to measure out the same but I noticed they look a little different. The tags from the rear seats read as...