Search results for query: *

I have a real nice fender for a '67 Plymouth Barracuda. I had it sandblasted (except for the factory rustproofing on the inside) and worked on it a bit to get it looking really nice. The hard work is done, I'd use it on my car. This fender is 57 years old and hard to find. $800 firm...

My 67 Barracuda has stock Kelsey Hayes power disc brakes were stolen from a 68 Valiant. I got the brakes, master, prop valve all at once. Only problem is that the fronts don't grab well/rears lock up and the pedal is not so firm. The master also leaks from the top due to rust so it's time to...

I have a set of grills for a 67 Barracuda for $150 each. They're not in perfect shape but can be used on an everyday driver or restored. The chrome is good but there are a couple of dings. See pictures. The mounting screws are intact and free. These came off a California car so there's no...

Running a square-back alternator, one field is grounded. I had a mechanical regulator, it worked fine but recently crapped out so I want to replace it with a SS unit. I just need a good part # and source.

I find the site difficult to use in many ways. It's not intuitively obvious how to use some of the functions. For instance, how do I PM somebody? I don't know if the conversation is going out to the world or just to one person. Also, my inbox is full at 15 items and there is no way to delete...

I am still wanting door panels for a 74 Dart. They have to be black. Driver quality ok. I also need seats and headliner

I need front and back bench seats that will fit in my 2 dr. 74 Dart Swinger. They need not be perfect or even the correct year but you do need to be within range of Sacramento, CA. I also need door panels for the same. Do let me know what you have.

I installed a newer style 225 slant head (1975 vintage) on my old block (1967 or so) and everything worked out just fine except for the temperature sensor. The sensor hole is bigger on the newer head so I used an adapter but only the end of the sensor pokes into the water and now it barely...

I acquired a rebuild head which seems to be 1975 vintage so it's a newer style. I was hoping to install it onto my 67 225 6-banger but I noticed an extra port at the back of the head. Can anybody tell me what this is and how do I plug it? See the images below.

I tried to decode this fender tag, didn't get too far. All I got was that it was an original 6 cyl/auto car. Can anybody help?

I am looking for original bench seats and door panels for my 74 Dart. They don't have to be perfect, just usable. It would help to be near Sacramento, CA too.

I have a 74 Dart Swinger with manual drum brakes. There's 9" on the rear and appears to be stock and 10" on the front, possibly an "upgrade". My problem is the flex rubber brake lines are not correct. I need to know what it's supposed to look like from the main line to the slave cylinder...

I recently purchased a 74 dart, I need a fuse box diagram with amperage ratings. I have schematics from mymopar.com but it does not have fuse layout or ratings on it. I could also use a user manual too.

I just bought this Dart, I really could use an entire instrument panel but I'd settle for just the temp gauge if I have to. everything works but the temp gauge. The one I have is open. The gas gauge does work after I installed a SS voltage regulator on the dash so I am getting 5v to them...

I installed a 68 speedometer into my 67 Barracuda automatic and ordered a new speedo cable but the transmission end thread is too small. The other end just pushes in and it's ok. Can anybody tell me what part to order? I used Oreillys and it not right.

I have a real nice set of 340 hood inserts for a '68 Barracuda. This is the way I got them, unmolested and ready for paint. I just cleaned them very gingerly. All studs are in place too. There is an extremely small amount of pitting but I'd say they are 9 out of 10. Not bad for being over...

This is a repost of my 1968 Barracuda Convertible. I consider it a light project. Originally an Arizona car, bought in Southern California. I did not do the bodywork or paint, it's fair: I just cleaned it up and got it running! The 225 cubic inch 6 banger came out of a '68 Dart. I just...

This is a 1968 Barracuda Convertible. I consider it a light project. Not a BERB (Back East Rust Bucket) car, originally an Arizona car, bought in Southern California. I did not do the bodywork or paint, it's only fair: I just cleaned it up and got it running. It came with a 225 cubic inch 6...

I have a 67 Barracuda with a 318 engine, factory radiator and shroud. The shroud fits the radiator just fine but the 7 blade fan hits it on the passenger side. It's way off by at least 1.5". It used to all fit when I had the 273 engine in there. I don't know what's off. I'm thinking...

My switch crapped out, part #2820408. I'm guessing I won't find one so I'm looking for a replacement SPDT momentary switch I can replace it with. My circuit breaker is still usable.

My '67 Notchback has never stopped the way it should. I'm running Kelsey-Hayes discs up front and 10" rear drums. I'm using all the factory setup from a '68 Valiant including power disc master cylinder, combination valve and all the proper brakes lines. Yesterday I took apart the front...

I'm into fixing old Mopar radios. Most of them don't work and I have about a 50% chance getting them working when I do get them (mostly due to rust and corrosion issues). Show me what you have, we'll go from there.

I have a 2 speed wiper motor for sale. I did not test it but I will back it up if it does not. $50, can ship too. From Grass Valley, CA.

I have for sale an entire nose section for a '67 Barracuda. It includes both grilles, header, & PLYMOUTH letters. The grille is in good condition but does have a dent or two which could be fixed if you're good at that kind of thing. I also have 2 sets of running lamps in good to excellent...

I have a center console for sale in fair to good condition. She 'aint perfect, has a few pits here & there but is restore-able. Pickup only in Grass Valley, CA $150

I have a 3 core aluminum radiator, barely used for only 6 months then pulled out. It fit perfectly in my 67 Barracuda. I had it running with a 360 engine so the bottom output is on the passenger side. It's 22-3/4" wide and 21" tall. Pickup only near Sacramento, Ca, won't ship. $150 firm...

I've decided to add a non-remote mirror to the right side of my 67 Barracuda. Anybody have a picture and/or location information so I can do it right?

My 67 ragtop Barracuda has a set of 73 front disc brakes and stock 10" rear brakes. I am also using a new manual brake master cylinder. I got the entire system off a donor car including the proportioning valve, lines etc. I also have new rubber brake lines. Yesterday, I took the master...

I have a 904 that won't go into gear so I need a replacement that works. I am hoping for something cheaper than the $900 I was quoted to rebuild mine. I'm in Grass Valley, not far from Sacramento, Ca. I want someone local only.

Is there a pan available for my 904 that has a drain plug? I am hoping not to go with a deep pan.