Search results for query: *

wanted rust free trunk lid will pay $150.00 plus ride

Update to full time oiling I went with an . 080 restrictor and I have ood oil flow to rockers and no oil pressure drop

that is correct it needed a little work with carbide rotor file so a tap will start and then tap it with a 5/16 -24 you don't even have to drill it this way I can start at an .080 hole and correct it from there as of to day I have install all the cam bearing 2,3,4 I have drill the oiling hole...

for all of you that want to know what my gain is to convert to full time flow you block off the flow through the cam and that directs that oil to the mains and the 4 rods that see a pressure drop every time the hole in cam line up and at higher rpms that pressure drop is a bad thing and my thing...

ok the here is what I have done I have drilled right into the left side oil passage thought the oil feed to the head with a .250 drill and cut off oil supply from cam by drilling 1/8" in between two holes of the cam bearing and install so it lines up with mains all done so mains and rod don't...

ok guys has anyone done the fulltime oiling rocker arm conversion on the LA blocks I'm in the mid stream of converting my 360 to fulltime oiling and I'm need to know what size hole I should use I'm putting a restrictor in the deck surface and I don't want to go to big I have an -4 crossover and...

360 974 heads stage 2 port new stainless steel 2.02 intake valves new 1.60 stainless steel exhaust valves new hardened seats new valve guilds and not liners new springs heads set up for .600 lift these heads only have brake in time on them $600.00 OBO plus ride

1974 360 974 non smog 2.020 SS intake 1.600 SS exhaust stage 2 port job harden seats new guilds new springs good to .600 lift less than 20 miles just going new direction $600.00 plus ride

its gone

Ok the fly wheel is 35lbs then packaging another 4lbs and if you want the clutch set for the $50.00 it is 35lbs too and it will ship from 98233

the surface has some rust but will clean easy

125 anyone

650 anyone

Mopar 130 tooth 360 external balanced flywheel less than 20 miles on it $175.00 with stock clutch and pressure plate $225.00 plus ride

1973 360 974 non smog 2.020 SS intake 1.600 SS exhaust ported hardened seats and guilds new spring good up to .600 lift just brake in time sense out machine shop less than 45 minutes $750.00 OBO plus ride require adjustable rockers

my bad they are 1973 974 non smog with ss 2.020 intake 1.600 ss exhaust

intake flows appox 248cfm at .500 exhaust 191cfm at.500 I would say mybe 450hp

1973 360 587 Non Smog Ported Heads 2.020 stainless intake valves 1.600 stainless exhaust hardened seats and guilds new spring good to .600 lift just brake in time sense from machine shop heading new direction $750.00 OBO plus ride

I drove race cars for years and I know by seat time that torsion bars the longer they are like mopar the longer it take to wrap and the longer to unwrap so the control arms are slow to move compaired to coil overs so i'm going with the coil overs and stiffing up the chassis in all the wright...

I'm in need of a good right trunk floor extension drop off for 1965 Dodge Dart I don't want something that needs a lot of repair I already have that if I can not find a good one I will just do away with both and just go with a flat floor sense I have to do away with spare tire well please let...

I have a 65 dart that was a 6 so I need some thing for a V8

is it a V8 or 6

I need a complete early V8 gas pedal assembly

Early A Body V8 Exhaust Manifolds right manifold has no heat riser and there was never one $100.00 plus ride casting # 2465847 and 2843953

Early A Body Exhaust Manifold For V8 the right manifold does not have heat riser both in good shape $100.00 OBO plus ride casting # 2465847 and 2843953

I have an early A body floor shift power steering column for sale $75.00 plus ride all it needs is the lower seal that you can buy off EBay for $30.00 and a paint job

Early A body floor shift power steering column $75.00 plus ride

I have a early A body floor shift steering column set up for power steering for sale $100.00 plus ride

Can anyone help I need the right outer tail light for a 1965 Dodge Dart

I need the right outer tail light for a 1965 Dart