Search results for query: *

This is the first time I've ever entered a car show. There was alot of cool cool cars there including a Hemi Gtx and Superbird! I had alot of fun got another one im entering Saturday! Even tho my Dart isn't "show" ready I enjoy seeing it there among the others It actually got quite a bit of...

Since this is not A body related ill stick this in general discussion. But I had to share with you guys. I just got my next project home a 1974 dodge challenger. It's a little rough around the edges but it's gonna make a fine project. I've got a couple videos up on my YouTube channel already...

A couple years ago @j par and myself were talking about diy door panels. Well I finally got around to starting on mine. So far I'm very pleased with them. I am going to cover the bottom 3/4 with some vinyl to imitate the original and stain the top.

I have a brand new sending unit installed into a brand new tank I cannot get fuel to come out. I thought it was a fuel pump issue (also brand new) so I hooked up a electric fuel pump, nothing. So I thought maybe it was a clogged line so I unhooked the fuel lines and connected the electric fuel...

I have a 74 Cuda roller for sale. It is very rusty and needs alot of structural repairs. Unfortunately its a more extensive project than i can handle. It is an actual Cuda car 318 automatic. It has a 8 3/4 rear end in it. I have a roof, floors, and rear seat section sheet metal to go with it...

Not sure what all years this fits i believe it will fit all 72-76 abodies you can correct me if im wrong. I comes with the hinge but no trim and no hardware. $10 plus shipping

For sale power steering pump. Not sure what all it will fit but it came off a 75 slant six dart. $50 plus shipping. Probably fit in a large flat rate so shipping will be around 20. I will try the cheapest way possible.

Finally after all these years I got a work shop yesterday. Its not a garage but it's better than what I had. And better than paying rent for storage. I got a metal sides 12x16 building. I've started moving all my parts and stuff in it already. I've built some shelves and started organizing. Im...

I have never owned a race only vehicle. But im wanting to build one. I've been searching the marketplace and classifieds for a roller to buy the other day it struck me. I have an extra 2001 dodge ram I bought for parts to fix up the rusty ram. It runs and drives (sorta) its the perfect candidate...

I know this is a dumb question or thought rather but everything I see online says the gasket goes between the tank and sending unit. But with the gasket in that location the locating tabs do not reach the locating tab holes in the tank. Is it possible the gasket goes on the outside?

I just saw on Facebook they announced they are back in business and working on inventory! This is great news. Especially for us 73 and up slant 6 car guys. I hope they will be as great as before.

Im always collecting parts when I find them I found two atlas brand mopar ignition boxes the look older both made in USA one is 4 pin the other is 5 pin. Are these any count? @halifaxhops i know your the guru on stuff like this did i get a good part are they not much?

Well its came down to it. Im gonna have to buy a pan should I buy an aluminum aftermarket or a aftermarket steel one? I'm tired of chasing leaks i want one a drain plug so I found these two the steel one is about 50 dollars cheaper but the aluminum has a 2 quart extra capacity vs one quart on...

Im starting to plan my next engine build its gonna be a true low budget build not like my current one where I ended up replacing and buying everything. For a mid to mild build are the factory 6 blade pumps adequate? I put an 8 on my current 360 and have no problems I have several of the factory...

I have been using the mopar atf+4 in my 999 torqueflite. It is all original only thing I did was take it apart clean the valve body and install a shift kit. Im running a boss hogg converter. Im about to replace my transmission pan gasket for the 4th time at 8 dollars a quart atf4 is getting...

I'll be the first to admit that I know nothing about Chevrolet stuff. I know the common engine sizes and such but I have no clue on how to tell them apart. But ever since I was a kid I have always heard the term double hump heads for Chevrolet stuff you know them 300hp double hump heads on a...

I've been working on some merchandise for my YouTube channel so I designed a shirt today. What do you guys think? You like it ? Hate it? Anything I need to add or take away be honest. I haven't sent it in or bought any yet I want it to be right before I do. So I figured id ask you guys. Thanks...

I came across this on yt. I think this is a fantastic idea im gonna make one.

Im sure alot of yall have seen @318willrun post about the no name nationals. Im gonna try to make it here is my video. I posted it on his thread I figured id start my own as well. I need 408 more! Lol More videos coming soon. Hopefully tomorrow

I found a leak in my primary shaft a while back on my thermoquad its got quite a but of play in it but I been running it anyway. I haven't ran the car much since its got cold but the other day I started it and noticed I have have a really bad vacuum leak I couldn't pin it down exactly where it...

I spent the whole day working on my mountaineer last week i had to brake pads and found i had a bad wheel hub on the driver's front. So I ordered a new hub and replaced it today. Let me tell you that was a job. That sucker did not want to come out. I had to make a hub puller out of a piece of...

I took on another project. I would say side job but I'm doing this pro bono for a neighbor. So my neighbor has this 1998 ram with a 5.2 the engine "blew" i have no other details lol. So she had "a guy" put her another engine in. Well 3 months and over 1000 dollars later the guy never got it...

Well the 2021 hunting season is officially underway it has been here since October 2nd but I finally got around to going this week. I went bow hunting Friday saw a small 4 point let him walk. And saw several does and a giant after dark. Went back the next morning, which was the first day of...

There is nice dart sport local for sale. I saw it on my way to work a while back I have been meaning to stop and look at but I saw it listed on Facebook tonight. Its very clean looks solid 340 car. If someone on here is interested i can stop and take some more pictures of it for you. Be cool if...

Im sure you guys who follow my posts on here know by now I like to tinker and think outside the box. So today I started a project I have been wanting to do for a couple years now and just keep putting it off. Sorry It got dark on me and I didn't get any pictures so you will just have to...

Im considering these tires for my 2001 ram project. They are good looking tires i like aggressive treads on my 4x4 trucks. These are 10 ply mud terrain tires for a price that's is hard to beat. $636 for a set of four 285/75/16 thats pretty good for 10 plys. Anyone here ever ran them?

If anyone is considering doing magnum manifolds on your car while your at the junkyard pulling the manifolds snag the downpipe too. I was having some clearance issues on the drivers side causing issues with the kickdown linkage. So I got the bright idea of using the downpipe off my 2001 ram...

Got up this morning with plans on working on the dart and maybe doing some more on the ram project well I had to move the mountaineer ( my everyday driver atm) to get the dart around back. Get in the mountaineer nothing just cranks won't start. Ugh! So I start diagnostics on it. I learned today...

What the heck is going on with the price of transmission fluid? In January I bought 6 quarts for 29 bucks then on August 3 I got 6 quarts for 38 bucks that same 6 quarts is now 68 dollars! WTF?? This is for mopar atf 4. I can't believe this **** thats ridiculous. More than doubled in 10 months