Search results for query: *

Since I don't have the V8 anymore I don't need to hold onto this. This was on my 383 when it was in my Dart. It is a 165A, 1 wire alternator from powermaster. It was used on my car for about 3 years before I pulled the motor. It is in good condition with minor wear on the pulley I was using...

I never started a thread on the build of this project but I figured it was time to show what I've been up to on this old girl. I was always interested in the 2JZ-GTE platform and wanted to do an interesting engine swap into this car so might as well stuff one into the Dart I started with a bone...

I have a full set of the Viking Warrior shocks that I picked up for my 68' Dart. They have maybe 50 miles on them. I realized I needed a shorter set with how much my car is lowered. These are good for cars that are at stock ride height and up to 1.5 inches lowered. They have a few minor...

I have for sale a set of aftermarket spindles and a set of MFR 2 inch drop spindles. Both are for A/B/E use, '73 and up disc brake setups. The stock type spindles have never been installed. One was used to mock up a new brake system in a jig. The other has never had anything mounted to/on it...

What to do when you want better braking than the 11-3/4 mopar units can provide? Pay $2500 for a set of Baer brakes..? Possible, but expensive. How about adapting a set of 2010 Shelby GT500 14 inch rotors with 4 piston Brembo calipers? Impossible you say? Read on. My son's '68 Dart gets...

I need help to find a 3/8 inch banjo fitting with a female 3/8-24 inverted flare end on it. Anyone know where I can find this?

I have for sale a pair of 10 x 2-1/2 inch brake backing plates and the parking brake struts and levers. All are in good condition and were removed from a working car to install disc brakes. Parking brake levers and struts: $40 shipped. Brake backing plates: $50 shipped. Paypal only, please...

I am selling a set of Firm Feel tubular upper control arms. They are the large ball joint version for '73 and up. Used, but in good shape. Will need new boots. Firmfeel Mopar Suspension and Steering $225 shipped. Paypal only, please.......

I have a pair of steering arms of unknown Mopar origin. The casting numbers are 3815710 and 3815711. They do not have an integrated ball joint, they have the socket. Can anyone tell me what they came from..??

I have for sale a brake pedal assembly removed from a '68 Dart. In good condition. $25 plus shipping. Paypal only, please.

I have for sale an 18 inch six blade fan and shroud. The shroud measures 18 by 26.5 inches and is a Mopar piece. Both in very good condition. Were installed on a big block Dart, but went to electric fans. $60 plus shipping. Paypal only please. Located in Merritt Island, Fl.

Can anyone tell me what the bolt circle diameter is for the front bearing retainer on a 23 spline A833..??

Anyone running the Tilton 6000 series hydraulic release bearing on their A833? My son has been using the American Powertrain Hydramax bearing on his A833 for 2 years and it has started to leak. Since the trans has to come out anyway, we were considering switching to the Tilton 6000 series...

Anyone running this system by Compu Tronix.?? Looks interesting.... Compu-Tronix. Electronic Ignition Systems

I have a flexplate removed from a 400 big block for sale. Has been cleaned and painted. $30 shipped. Located in Merritt Island, Fl.

I have the kickdown linkage removed from a 400 engine. This is just the bracket and linkage on the top of the intake manifold. Don't have the linkage that goes down to the trans. $60 shipped. Located in Merritt Island, Fl.

I have a Holley 2 barrel carb removed from a mid '70s 400. Clean. Probably could stand a rebuild. $60 shipped. Located in Merritt Island, Fl.

There used to be Rocky Mountain Dashes, and then I think they became Peak Dashes. Neither website is there anymore. Is anyone making this style of dash? Would really like to find a "blank" version to install a Racepak instrument panel.

Picked up a clean 400 and am looking to go to a 499 stroker. What options do I have for headers if I want to keep power steering in a '68 Dart? Currently the car has a 383 with Schumacher headers, but I don't think the Schumachers will flow enough for the stroker......

I have a question: who has experience with the Comp Cams Ultra Pro Magnum rockers arms and shafts (p/n 1621-16) in a big block (383 in my case). I just purchased a set of these to replace a set of PRW stainless roller tip rockers which have mostly used up their shaft bushings after only 12,000...

I have for sale a pair of lightweight hood hinge springs for sale. These are the springs you need if you are installing a fiberglass hood and don't want to use a prop rod. They have never been installed. Decided to go "springless" instead. $40 shipped. Paypal only, please.

I have for sale a new 4 speed shifter boot. This is a B-body boot for a non-console car. Never installed. Year One part number is K1. $40 shipped. Paypal only please. Located in Merritt Island, Fl.

I have for sale an inspection cover (dust shield) for a 727 big block transmission. It is in very good to excellent condition. $25 plus shipping. Paypal only, please. Located in Merritt Island, Fl.

I have for sale a brake pedal assembly removed from a '68 Dart. It was removed to install a clutch/brake pedal assembly. It is in good condition and includes the brake light switch. $40 plus shipping. Paypal only, please. Located in Merritt Island, Fl.

I have for sale an auto center console removed from a '68 Dart. It is good driver quality. There is some light pitting on the chrome and the top plate has been repainted. Hi-res photos available. $150 plus shipping. Paypal only, please. Located in Merritt Island, Fl.

Last fall it was installation of a new 383..... http://www.forabodiesonly.com/mopar/showthread.php?t=242175 This holiday its converting the Dart over to a 4-speed.... Here's some of the removal....

I have for sale the auto console shifter, linkage and brackets removed from my son's '68 Dart. They are in good working condition. The shifter has light corrosion/pitting on the shaft and handle. Hi-res photos available... $80 plus shipping. Paypal only, please.

I have for sale a set of stainless steel transmission cooler lines, for an A-body/727 combo. Removed from my son's '68 Dart because we are installing a 4-speed. They are in near-new condition. $40 plus shipping. Paypal only, please.

I have for sale a driveshaft removed from a '68 Dart 383/727. It is approximately 47-7/8 inches center to center. It has 7290 joints with less than 5000 miles on them. The front yoke fits a 727/A833 and is 5 inches long. $75 plus shipping. Paypal only please.

I have a B&M flexplate for sale. Removed from my son's '68 Dart 383 because we're converting to a 4-speed. Installed for one year, nearly new. SFI rated, not the flimsy stock type..... Link to description: http://www.jegs.com/i/B%26amp%3BM/130/10230/10002/-1 $40 plus shipping. Paypal...