Search results for query: *

ok guys have any of you used or heard about Eastwoods rally wheel kit? http://www.eastwood.com/mopar-rally-wheel-paint-kit.html?fee=5&fep=1278&srccode=ga220010&gclid=CIOW-6_E-L8CFQSEaQodgH4AUw It clams to be the same color but is the zinc phosphate the right color for the caps or do you have...

Hello everyone I am looking for 4 bumper bolts with the rounded head and square flange.My bumpers are in too bad of shape to have rechromed so I'm going to paint them body color (hemi orange).But I think body color bumpers look better with out the bumper guards and the chrome ones one better...

Hey everyone,I'm have problems with my 6 pack carbs.To start I'm running a 340 with around 18 degree timing full advanced is unknown.As you may know the 6 pack intake is a high rise so heat transfer shouldn't be too bad but when I run the car to normal temps and shut it off the carbs will drop...

I have my six pack in but no kick down linkage for an A body.I currently don't have any thing on the intake mounts for the carb end of the linkage but I do have the rod connected to the trans.My question does any one know if there is a produced setup availible or am I going to have to fab one...

I had "Once upon a time" recorded and watched it this morning and there was a 72 swinger with a demon dual snorkel scoop.It was royal blue in color.They had it in several back ground shots.Was wandering if anyone else seen it or maybe a member here?Sorry I dont have time to work up a pic.

I have a couple questions (1)when I had the dash part I tested all the gauges with a 9v battery and all tested fine.Being careful to not hold the power to the gauge very long so not to burn it up.Now the dash is in the car and the fuel gauge doesn't register anything,needle sits way down below...

I am looking for a good driver to show quality 6 pack air breather with filter and the throttle linkage.I believe the 440 and 340 setup is the same.Im putting it on a 340.If no one has a used one does anyone know where a good place to get a new one,I already looked at yearone just looking for...

I've been waiting all summer for this week.Every year they have new shows as well.Since they started using the 2,000 frames per second slo-mo camera you can see every movement they make when they attack.very revealing.The great whites are my favorites,the way they attack and thier massive...

I bought this car the summer of 2011 and have been working on it since.Its a 1970 Dodge Dart Swinger 318,904 lock up converter neither numbers matching with an 8 3/4" suregrip rear,factory air,power steering manuel drum brakes.Original seats and carpet.I found a partial build sheet under the...

While replacing the gasket,filter and seals in my 904(1978 I think) I found this washer thing attached to the magnet in the pan.So does any body know what this is or where it came from.It's possible it's not a tranny part as I don't know much of the history of the car.So all you tranny experts...

I have a set of supposedly 340 rods,I got with my 340 block and x heads unassembled.So asI'm cleaning the rods up I notice the 7 are 645 bushed and 1 is a 496 bushed rod.So I assumed I had a set thrown together but then I noticed the stamp is the same as on all the rods and the rods themselves...

Just a few mopars.This is a /6 car but what a change it went thru.

As I was test fitting the upper window trim I noticed a "bulge" along the runner as it goes down into the quarter area.Both sides have it but the driver side is bigger.Also the top had been replaced before I bought it but not completed as the front and back glass was still out(this was done by a...

Ok so I just received a set of windshield clips and they are not the same as the ones on my car.The center section looks to be the same but the old ones has an extra (2) arms if you will,making them wider at the base.The new ones look just like the ones in the Year One catalog for a 70 dart.So...

April 1st sunday morning on spike tv on Muscle Car at 10:30 central.Mid year last year my cousin had a dodge dart sport or demon not sure which one with a nicely built 360 for sale.He gets a call from "muscle car" or some one in that line(I thought he said it was a magazine)asking about his...

I just got this in an email and thought I would share it.Belts and Brake stuff mostly. http://www.rockauto.com/RSS/vehiclefeeds.php?carcode=1088186&m=wc&l=en&html=true

Ok I've got the engine out and partailly dissasembled and here is what I've found. (1)stock bore and stroke 318(1975) (2)stock 360 heads-1.88 and 1.60(1975) no porting. (3)purple cam #221255 which seems to have .450/.450 lift (4)stock converter (5) I have a set up 318 heads stock.(1975)...

Jan 21-22 at the Nashville fair grounds.Car show and swap meet.All indoors.Anyone entering or just going? http://www.nashvilleautofest.com/

I dont have the door keys to my 72 cuda and was wondering what I needed to do to get keys to use the factory locks (prefered) or what other options are out there.Or would it be simpler to just buy a whole lock set for the ign.,doors and trunk?BTW the ignition has been changed but I have the...

Just got my cuda last week it's a numbers matching 72 not original color tho its gy9 tawny gold met.It has the r26 radio option which is the am radio with cassette.Well from what I've read the console mount was a 71 option only,the thing is this car was biult in 11-71 and sold or picked up 12-71...

I cant seem to find the changes made from the early 430s to the 72,73 340 motors.I have read that the compression went from 10.4:1 to 8.5:1 but I couldn't find why.Anyone know what they changed on the motors or was it just gross and net HP and they were closer then they made them out to be.PRE...

Just currious as to what a 340 matching numbers auto cuda not original paint color and needs new top and quarters and maybe a few small detail spots.Sorry new pics but assume everything else is good quality.

Ok I have a 904 trans.the engine is out of the car at the moment.When I would putthe car in gear idleing at about 1000 rpms or less the trans would jerk pretty hard,I would have to hold the brake hard to keep it from jumping.What I know about the motor is its a 318 has a 500 cfm eddy carb and...

I cant seem to find any info so heres my question what is the differenc between a 70 condensor and a 73-74 condensor and will the 73 bolt up to a 70 dart swinger?

Ok,so I'm getting close to painting my dash and upper door panels body color(hemi orange).I'm going to paint the dash upper from the pad to windshield black to flow with the pillar covers and not have to worry about repainting if I went with color on top.And I'm wandering what I should use on...

Hey guys I'm looking for pics of the windshield trim and the rear window trim (inside)on a 70 dart 2 door.My car had the top replaced brfore I got it and I'm just looking for some info on what I'm missing in parts and where the parts I do have go.Thanks Sorry about the typo in the header.Pics...

Ok so I have a 70 dart 318 car.It has the trim down the side above the wheelwells and a stip below the door. so my question is should I put the trim back on or leave it.If I leave it off I'm going to add a black stipe across the trunk and down the quarters.I'm not sure the stripe and trim would...

Hello everyone,new to this site.I've trolled for about a week and I can already tell there is alot of good helpful ppl here alot like the other site I belong to chargerforums(I have an 06 torred Daytona Charger).I'm new to the restore game but a long time mopar fan.My first mopar was a 72...