Search results for query: *

Okay Guys I lowered it a little more but am pretty much down to my bottom number as I will roll her into storage until I get the itch to finish her. But I will give it one shot at this price level and see what the market says. True Big Block car LS23H8B249***. This is a True Factory H code...

****I really want to sell this car to an FABO member and NOT have to deal with selling it on ebay so I will drop the price down to $9650!! It and original 383 4 speed car with one of the most SOLID bodies you will find. Why buy a rusted hulk that needs $5K-$7$ woth of sheetmetal work when you...

I am needing a new A body non OD 4 speed as I took my 4 speed in to get rebuilt and it is shot. All the gears are shot but reverse and the input and output shafts are gone. I have a good case but need the internals and I would either take a whole rebuildable 4 speed or if you have the input...

In need of two really nice defrost hoses non a/c car. Let me know what you have. thanks Mike

In need of a set of show quality 68 dart headlight bezels.

Hello, I am in need of a very very nice headrest for our 68 gts as it came with the optional headrests and one of them split. Only really need one with nice chrome inserts and no damage. Let me know what you have, will take a pair if need be. Thanks MIke

Hello, I am needing a few rear gear ratios for our cars. All need to be 489 case setups but we need them in a 3.55 and 3.73 ratio. Just need the ring and pinion not whole pig. Looking for rust free pieces that will not whine when set up. Thanks Mike

Hello, I have a question I hope you can help me with. I am going to put a set of tires on my dart that would be just under 28 inches tall and the stock tires would have been 26 inches tall. I was wondering if anyone had a conversion for how much that will affect the rear gear ratio? I have...

Hello, ANY help would be greatly appreciated!! I have a 68 dart gts H code I got a little crazy on with the motor and now I need to get a tire under it. We built a 505 stroker with stealth heads and a six pack setup so hooking up will be an issue. I want to run a redline drag radial on the car...

Looking for one of those MP offset hanger and shackle kit for my dart and also looking for a set of SS springs. Let me know what you have. thanks Mike

Hello, I am needing a nice high end driver quality or show quality chrome top plate and door for a 1968 dodge dart auto console. Also needing a dash panel set in the same quality. Finally decided to give our GTS the interior it deserves now that we got the body done. Let me know what you guys...

I am in need of a 6 pack harmonic balancer and 2 useable 6 pack rods. Let me know if you guys have any of this stuff sitting around.

Hello, I am in need of a set of shift rods for a Big Block 4 speed for my 68 gts. It came with all the parts except the rods and I am running the hurst 4 speed shifter on it. Let me know if you guys have any of these as I could use them. thanks Mike

Looking for another M code dart project and also a 69 383 4 Speed project. I know you guess have these tucked away out there so let me know what you have. Currently have 2 M codes and looking for another and preferably NOT a T5 bronze one as that is what both of ours are now. If you have any M...

1974 Dodge Dart Drag Car for sale. Very nice looking drag car, it is not a show car as it is a race car and has its war wounds on the body but looks nice from 10 feet away for a race car. The body is pretty solid and someone in the past added some nicely flared fiberglass fenders on the back so...

Looking for a nice Edelbrock CH4B aluminum intake manifold for a 440. Does not matter if it is painted as I am going to paint it. Let me know what you have. Thanks Mike

Who have a nice 187 pan with pickup for sale? would like a nice none dented piece. let me know. Thanks Mike

I am looking to convert the Z bar setup to a hydralic clutch. Let me know if anyone has a kit for sale. I have seen a few online but if anyone has any input on this on which are good and which are not I would love the info. Or if you have a conversion kit you are not using and want to sell it...

Looking for a set of nice schumacher tri-y headers for a RB BB in an A body. Would like a nice gently used set. Let me know what you have. Thanks Mike

I am looking for a nice set of 3.55 gears for a 489 case. I have the case and sure grip unit but need the gear set. Nothing pitted, rusted or any issues at all. I have those! If you have case set up with a sure grip in it that is nice and makes no noise at all I would be interested in that but...

Looking for a set of nice schumacher tri-y headers for a RB BB in an A body. Would like a nice gently used set. Let me know what you have. Thanks Mike

Looking for a nice 893 BB A body oil pan. Thanks Mike

Looking for a nice edelbrok DP4B intake, let me know what you have. thanks Mike

Looking for a nice 383 edelbrock CH4B intake manifold to use on my 68 gts. Let me know what you have. Thanks Mike

Does ANYONE out there have one of these left side exhaust manifolds that Accurate LTD made for the 383 dart? I have been searching high and low and they were discontinued but I could really use one if someone has one for sale. Any help would be greatly appreciated or if anyone has installed a...

My Dad and I are currently restoring an M code Dart and we are looking for any parts that might be out there. We have the exhaust manifolds but need the heat shield, oil pan, exhaust spacers, and any info or pics anyone has one M codes that could help us out. I am also looking for an M code...

Looking for 4 nice driver quality dog dish center hubcaps for a 68 dodge dart gts. Thanks Mike

Looking for one large trunk finish panel for a 1968 dart gts. let me know what you have. Thanks Mike

Looking for 383 A body 68 exhaust manifolds and a BB a body 68-69 K member. Let me know what you have. Thanks Mike

Hello, I am looking for a 1969 dart gts 383 4 speed project car. Would prefer black or red in color but open to others also would prefer buckets over bench. Would like it to be a roller with most of the BB stuff still on it. Would need the car to have a fender tag and would prefer build sheet...