Search results for query: *

I'd like to hear the BOV sound ha..might sound cool to me But do you plan to change rear gears to something in the 3x range?

How much for shipping to Pittsburgh PA 15211?

Holly's are the easiest for blow through as demons Edelbrocks/Carter's don't work well as theirs not really a source of nitrl floats.. I know of one guy that started making them for edelbrocks, but not sure he still does or not Mark Burton was his name As for cfm and blow through...carb cfm...

Converting my Fbody and no protour style kit Been in protour scense for almost 2 decades done modified stock, m2 kits, never did a McPherson yet.. All have their pros and cons, but truly doesn't matter as roadrace/autoX is mainly driver skills than setup

Well found my answer Disk Brake Conversion Info Really don't need to swap stock for stock I'm ditching the stock for a McPherson Coilovers strut mount setup made for a different Mopar platform vs modified stock or MII route

Anyone know of Abody suspension parts like upper/lower control arms and spindle will swap on to a Fbody by chance Looking at AJE McPherson kit

Theres only 3 good modern options H4 conversion via danial stern lighting Led projectors from JW Speaker Hid projectors via Dapper lighting Relay kits are cheap..20 to 40 bucks and should be used on all 3 options..hell when ised on stock sealed beams, itll dramaticly improve lighting. . If the...

Yes imho the Street Demon is the best new out the box carbs..otherwise its a Qjet built by qjetpower or everyday performance..elsewhere is junk The edelbrock is just a mediocre carb..

My choice of rad company is RND Fabrication now that Alumitech went under theyll makes custom rads no question

found about this today through bordem Looksike a B body on abody frame... any members here have one still not as cool as a 71 Chrysler charger from Aussie but cool non the less...

heres a good comparison against the old hotchkis valved Bilstein HP1000s up against the new SPS 1.5 fox valved shocks Development of the New Hotchkis Tuned APS Adjustable Monotube Shocks - YouTube at about 1.25 mark at one point I was tempted to buy a set of Q-series and a set of SPS 1.5s and...

dont know whats exactly available for Abodies but best shocks available would be made by FOX which leads to the following Ridetech Q-series Hotchkis 1.5 SPS if planning to go coil overs, Ridetech or Viking(hybrid coil) if active suspension JRI J-Ride(adjustable ride height) Viking Berserkers...

https://www.youtube.com/watch?feature=player_embedded&v=BIzXb-MbSN4

bump 4k obo

http://pittsburgh.craigslist.org/cto/4601822040.html posting on behalf of my brother 1979 power wagon 360 v8 56k edelbrock avs 4bbl 650 cfm aluminum D/P 4bbl intake auto/fulltime 4wd 4inch suspension lift 3inch body lift 2 sets of wheels/tires new shocks all around pittsburgh, PA 5k OBO...

Yep what's the point of a warranty if you constantly have to eat 30 dollars to return **** only to get **** back? If it's bad core have to Send back and eat 30.. If your lucky enough to have bad weld on end tank at least you can take it to rad shop and have champion refund repair cost..but who...

heres one post ive found from v8buick After 3 months of use in relatively cool weather (40s-upper70s) Champion Radiator has started leaking where the cooling rows go into the end caps. http://www.v8buick.com/showthread.php?215888-Chinese-Aluminum-Radiator&highlight=champion+radiator theirs a...

Like I said, I ordered my 2row for the maverick in 08 direct from champion fit was perfect, no issues with warp, fitment, leaky core or end tank welds..still working flawless today .big thread from maverick.to cheap and had good results at that time I believe it was only champion and monster...

their a gample in reguards to fitment and quality control. ive had 2 both in a week start leeking fluid at the core/fins theyre chinese made to boot anyting more then 2 rows made by them is a gimmick spend a lil extra to get a griffin or becool or something I would say Alumitech but they sadly...

check out the Fox shocks Ridetech(Q-series) and Hotchkis (1.5s )both sell fox shocks but with their own rebound settings and whatnot

yes I know about this, I just ment no one really builds an engine to a magic bore to stroke ratio, nor is there a universal onw otherwise every engine would be built with w/e the ratio is just about every engine is within the 1.5 to 1.7 range regarding bore/stroke ratio my buick 350 has a...

To get a GM A-body to launch dead straight you would need a Hr Parts n stuff 1.5 drag bar along with Ta performance No-hop bars if you want them to corner, you need johnnyjoints arms or DSE swivel link arms

I for one like all cars/brand engines .well atleast have one or two favorites from each. But out of GM Small blocks the chevys were the crappiest.. only reason everyone thinks theyre so supuerior is because for GM chevy was bottom of barrel..everyone could afford a chevy vs olds/buick caddy.. so...

I hope you have good luck with that radiator... I purchased a 2 core? for my ford maverick, works wonderful, no leakes been like 4 or 5 years now. this was before ebay was flooded with these Chinese radiators I purchased one of their 4 cores for my buick and it leaked within a weak, sent back...

ok...was it a website thing or did they mail a card with the discount code? I cant remember and just talked to reese via online chat through summit and he claims he never came across a 20% discount sale...lol but i know theres one casue i saved a shitload of cash the last 2 years due to this...

guys put 17x9s on the front of lil maverick, and it definatly looks like a mopar abody has lot more room..but i'm sure with 7in BS you;ll need to measure and get the correct spacers get the spacers that bolt on and has its own studs..

I wasnt sure where to post this but.. I have for sale, everything is new in box. 800 cfm edelbrock avs carb with chrome single fuel line and filter kit 400 shipped that about $52 in savings over summit/jegs I also have a 1400hp Fuelab electric pump thats suitible for fuel injection...

I'm pretty sure they have it around christmas time til end of near years so should be seeing a discount in a couple weeks i hope!

any idea for prices on the parts I need?

duquesne heights I'm looking to convert a 75 frontend to a 71-72 pm me for price of everything