Search results for query: *

Sold

Stay in this forum and search " sunroof " He lives in Laughlin, Nv. He bought ASC old stock.

Price now $6000 FIRM.

Reduce it, use correct pressure and overlap 1/3 of your first pass. Relax by whatever means, limit distractions, dont shoot scared and lay that .... on!

You can purchase the felt wheels at any good-quality auto parts store or even Home Depot. Im not a rouge(stick) polishing guy so I use chrome polish with good results. To lessen the mess, pour polish lightly on the wheel while spinning with hand, rub it in and have your piece of chrome pushed up...

I once shot Rustoleum on a 63 Buicks roof. Reduce it with Acetone and shoot it. I paint professionally now but I would shoot Rustoleum for that. Its messy, sticky and takes a while to dry. Good luck!

If your using HOK basecoat I would use their CC also. It has great UV qualities. Years ago I used a cheap clear over HOK candy and it faded in a year.

Search "Sunroof parts for all"

From a painters point of view, I have never run across a car completely prepped, ready to spray. You may think its ready, but its not. 5-10 hours for final prep, 5-10 hours for masking (properly) 1 hr. getting in the zone, 2-4 hours painting and clearing. It adds up quickly. Dont get your hopes...

I always use etching primer when coating bare metal(chrome to aluminum) Its mildly acidic so it etches itself to the metal, hence, ETCHing primer. I tend to use CUUDA's method, a coat of etch-prime to bite into the bare metal and go from there. Without it, your flake factor could increase. Good...

Nevermind guys, I searched "clunk" and got all the answers.

1973 DDS 340, 727, 8 3/4, auto on the tree. When I shift from park to reverse, or from drive to reverse I get a loud CLUNK. Would that be tranny, motor mounts or something else? Thanx.

The SEM brand works well. As ToolmanMike says- prep is everything.

Vintage Sammy is good ****. He's from the I.E. Bad Motor Scooter, Red, Trans-Am is great driving music. I'll be moving to Cabo San Lucas in a couple of months so...

Problem solved. Turns out that the tank was full.

Can't say I have. I'm not too familiar with any of that stuff.

73 dart sport 340. So this happened to both my dad and I when refueling at multiple gas stations. I know for a fact that the gas tank was nowhere near full, yet I pumped about $5 in and it started to overflow to where I could see gas in the fill tube with the nozzle out. Couldn't pump anymore...

May 4,5,6th. Downtown Riverside. 14th and Main st. This is a pretty cool show, especially for locals who remember cruising Market st. and Magnolia Ave. From 6pm to 10pm Friday you can cruise Market st. again (with R.P.D. as chaperons) Hope to see some Mopar weirdos down there.

Im with MileHighDart, If you reversed the hash marks I think, IMO that it would be a good looking stripe. Good work.

search "sunroof" I posted an address to some guy in Nevada. He has what you need.

Yup, that was it! Installed a new neg. cable and starter relay and she fired right up. Thanx guys.

67dart273 and Mr. Green you guys nailed it. I friend stopped by, grabbed the multi-tester and pin pointed it to starter relay(new?) and bad neg. batt. cable. I'll slap some new ones on and keep ya posted. Thnx again FABO!

I was explaining to my son that old cars are alive,with personalities, humor, most are temperamental (drives best when clean) Like a lot of kids today, he will take wikipedia's word as gospel. He claimed it was impossible for a car to fix itself. I cant count how many times I've been pissed off...

How would I do that, to the body of the relay?

New starter, new relay.. initially- it cranked very slow(ign start) and nearly melted one of two ground cables connected to my battery.. short to ground? Now, ign start doesn't work at all, but when relay is jumped, it cranks fine. Input?

Okay, my bad. My son missed one wire when hooking up the starter relay, all is good now, thanks for the input.

fixed

Also, my starter sits less than a finger space away from my headers. I heard that can be a big problem. Anyway to avoid that if I replace the starter without replacing the headers? Thanks..

I have a 73 dart sport. My car wasn't cranking. I could jump the starter relay and get it started though. I eventually replaced the relay, but now it barely cranks, then just stops, like the battery is dying, however, the battery's at full charge. Do I need a new starter? Could it be a...

After you sand, use "etching primer" on the bare metal areas(aerosol $15) You dont have to prime the entire area to be painted if the existing paint is good,it looks like stock paint so whatever you apply will stick properly. Since you live in Mich. I would go with a roll or spray-on bed liner...