Search results for query: *

It comes up from time to time so I thought I'd put some free time to use. I'd posted this before on a thread but this one I cleaned up.

Started going thru attic and cleaning out some child hood memories. Found some toys from back in the day to set aside. Most things after 40 or so years are shot and junk. But came across some memories. One thing I found was an old Stomper set up and the pull sled. I remember putting flour on my...

Ran across this in my garage. Imagine I got it in the mid to late 80’s. Just a little nostalgia. Will put on my Demon in July when the law not requiring front plates here kicks in.

For anyone interested I received this email today.

Anybody here been or going. Me and my dad are discussing making the trip. Looking for input and if it’s worth 4 hour drive. So just looking for general input. Thanks.

Hello all, I'm looking for one of the young guns or someone (not a parts flipper) in need of a Spectra CR11E gas tank with a repro 3/8" sending unit. I bought this tank to use in my 71 Demon. This fits the later cars 73 up? It has the single vent not the 4 vent ECS system. Here's the deal the...

Hello all, I am in search of a Torker 2 440. Looking for a clean unmolested (no porting) manifold with good threads etc. PM me please with what you have shipped to 45107 in Ohio. I also use paypal. Thank you.

Went to the Old Geezers at KilKare Xenia OH. This is the first time with the Demon, and my first time in 30+ years. My 76 yr old dad took his 67 Coronet, which the main reason for me going was to spend time with him. The first pass the car spun, didn't really heat the tires just scuffed them...

Saturday August 19. Any members going?

I got these with my 71 Demon, which due to my own lack of knowledge, aren't used in it. So I assume these are for a 70 and earlier car. Unfortunately I had these chrome plated with some other items I had done. There are some areas where the center hole is for the visor mount that it didn't take...

Ok, so I am finally nearing the end of my journey on my Demon. I know I'm going to have to do some tuning on the suspension to get this thing anywhere near hooking. Currently the car has the 863,864 SS springs under it. Mostly the car will be street driven, with a strip run once or twice a year...

I need some input. I've installed a Sniper EFI on my 71 Demon. When I go to the run position, the unit powers up as it should. But the issue comes in when I go to start. The unit momentarily loses power and reboots. I have the ignition one and two (brown and dark blue) tied together and feeding...

Trying to confirm myself, on my 71 Demon I don't have hardware to mount the rear bumper brackets to the body. The slot measures a tad over half inch. It looks like a 1/2" carriage bolt with a retainer would work for this and allow it to float to adjust side to side. Is this the correct way of...

I'm in search of a nice windshield wiper switch retaining nut and control knob 2 speed for the rally dash (if it matters) to go on my 71 Demon. If you have one pm me here with a price shipped to 45107 in Ohio. Thank you. Retaining nut found. Still need the control knob.

Finally getting ready to actually start putting my 71 Demon together. There are a lot of little details with the car that I'm finding and need some assistance. I bought this car as a project and brought most of it home in boxes so I didn't see how it came apart. The one I'm fighting now is where...

So I noticed that when it gets warm the remote rally mirror for my Demon gets "floppy". I decided to see if I can fix it. This is just a start so be patient. There is a screw up in the base of the mirror that releases the guts. 1st picture. After removing the screw the attach assembly pulls...

Searching for some knowledge and experience. I'm finally winding down on my Demon but have run into a snag. I have 2 drivers side doors but neither is in the best of shape and I'm tossing the idea of re skinning. The frames are solid but the sheet metal skin is not so hot and I really don't want...

Quick question if someone could help. On my 71 Demon I'm getting down to paint (finally), what I need to find out is what color was the inside of the front valence painted? Body color or blacked out. Thanks in advance.

Summit racing has the green top reproduction batteries on clearance. Don't know anything about them, just thought there may be some interest. http://m.summitracing.com/parts/anp-s24mg

Hello all, I'm trying to figure out what valve cover breather I need to use. I'm running a Moroso air filter assy that has an add on port that is 3/4" OD. Valve covers are M/T cast. I am looking at using something like the Mopar P4120446 but I have been unable to find a spec on the nipple size...

I am offering up a new 70-71 Dart 71 Demon drivers side AMD fender p/n 200-2070L. This fender was DAMAGED during shipping. The ONLY damage was to the extension where the cross brace mounts for the hood latch tray. The rest of the fender is straight. Shipping for this would be, guessing...

Need some advice and guidance. I've never dealt with small blocks too much, but my dad has a 65 273 2 bbl with the 904 push button trans that's been sitting. The trans code 2466123w comes up as a 65 barracuda, dart or valiant 2 bbl 273. This setup has been sitting for I don't know how long but...

Once again I'm here for some help. I need a picture of the radiator support with the brackets that the grille attaches to for my 71 Demon, I'd assume the Dart would be the same as it uses the same grille. Looking for the shape as well as location. I looked in my FSM and there's no clear...

Not mine but have seen others lookin for these. Just trying to help someone out. http://m.ebay.com/itm/381277501201?nav=SEARCH

This is a subject that has been brought up many times here. Thought I'd pass on my personal experience. Yesterday after almost 4 years I finally got to drive my BB Demon, though it was only out of the garage. I've done many changes to the car electrically, ammeter bypass, running a Denso...

Hello all, I'm looking for a shift select lever (the lower one in picture) that goes on the transmission for a 727 ( I believe a 904 is the same) like in the picture. If you've got one and willing to part with it pm me here with price with shipping to 45107 in Ohio. Thank you. I use PayPal.

I finally found some molded hoses that work with a little trimming for the 440 in my Demon. I'm running a Champion radiator CC375 26" radiator. For the upper I'm using a gates 20630 for a 69 Charger 440 with extra cooling. With a little trimming it fits pretty well. The lower I found a GoodYear...

Hello all. Got a quick question for my 71 Demon. I bought this car as a roller with many boxes of parts. The PO had already done most of the sheet metal. And being as this is my first A Body this is one of the areas I'm not familiar with. I see ads for floor wiring covers I know what they do but...

I searched here and had no luck, same on the www. I need new rear axle bump stops that mount to the frame over the axle. What's everyone else using? And could be my terminology is not correct. Thanks in advance. Sorry you are correct forgot the important stuff. These are for my 71 Demon.

Hello everyone. I am at a crossroad on my Demon. I will be running an MRL built 440, dynoed at 560HP and 575ft/lbs tq. I have searched and searched but no definitive answer. I've had two separate body men, both drag racers, one an Abody guy, tell me I should really install at least a 6 pt roll...