Search results for query: *

Location???

Sounds simple but make sure you have the plug wires in the correct firing order It happens....

So last night I simply rested the manifold on the gaskets and a bead of rtv. I hand tightened a manifold bold in each of the four corners. I planned on going back today and torquing all 12 bolts down to spec in that Mopar sequence. I should be able to fill it back with water (test run) and fire...

I went with these this time around ---https://i.imgur.com/K2a1o0L.jpg

Locating pins were never there (at least when I got into the motor) ---https://i.imgur.com/oLQVCLw.jpg

I actually had steel gaskets installed Seems like a lot of blue rtv was missing from this drivers so read water hole I used the fl1213 today (which are felt) I'll let it cure overnight before I test it out ---https://i.imgur.com/cgzTtBq.png

I'm headed to advance auto now to pick up a new set of FL1213 gaskets then rip it apart tonight and I'll take pics of the aluminum guide plates

Not here. The heads were off the engine for well over a year. I even posted pics here. I need to find them on my Google drive. I know I have the pics showing no pins were installed. I guess I need to rip this thing apart again and start over

I think I just fumbled the install I don't think the manifold is warped I doubt they milled that much as it was a $300 "go through p&p job" I just bolted the intake on and started it up The first time I had really high revs like I had leak in my intake gasket No water was leaking then I then...

Aluminum intake

Operator error I had the engine professionally built and it ran fine for 50k miles Decided to put on some new heads so I grabbed a set from junkyard and had machine shop work them over. Then I installed the fresh heads and now I have this leak. So the leak is my fault. There were no...

This Knockoff ran fine on my engine for about 3 yrs and 50k of daily driven miles. No leaks. I replaced the heads and thats when the leak started.

I used the regular FL1213 gasket That SFL1213 is only available at Summit Is there really a difference in that Summit only version? Is it superior to the regular FL1213?

Thanks but multiple brands with multiple levels of quality of gaskets I wanted to get the tried and true FABO consensus on gaskets work great and which ones are trash. I think I even installed this gasket set Yolo linked Maybe I needed more silicone or a different type (I used the blue rtv)...

So I filled up the radiator yesterday and my intake leaks exactly like this video. It is leaking from the rear drivers side I guess I have to reinstall the gasket but who makes the best one that doesn't leak? I have a 360 with knock off air gap intake.

Update: So my linkage was set up a little differently but I finally got it connected and I was able to use my gas pedal to feather the throttle and move the truck under its own power in over two years ---https://i.imgur.com/sflDUBe.jpg So I filled up the radiator and my intake leaks...

I found a video of wheni was running a 2bbl and was able to screen capture the linkage there. That's how I figured I had the front part of the linkage on wrong And I never ran dual springs so I don't need the rearward spring the other guy has ---https://i.imgur.com/3o0ZW1R.png

Can anyone give me detailed pics of these 3 sections in the pic below? I want to ensure I have all pieces and they are all hooked up correctly. ---https://i.imgur.com/PNd396j.jpg

Thanks!!! I see that I'm missing the green spring that goes from the carb back towards the firewall I only have the forward spring (carb towards radiator) installed now

Ok But I have no resistance on my gas pedal It's just flat on the floor I know I have to do something with the cable that attaches to the carb and it feeds through a crows foot but I can't remember exactly what all that is supposed to look like

Yeah I'm trying to avoid the lokar setup at the moment because I'd have to order it and I want to move the truck asap I already have the lokar 727 lockdown kit but it's not hooked up (it's in the packaging in my tool cabinet)

Knockoff air gap

35 miles to my house I've driven it before with no kickdown That's not the issue The issue is my gas pedal doesn't work at all because the throttle cable is not hooked up properly I have no tension in the throttle cable

Thanks for the info and compliment She's seen better days I'd like to get her back to where she was five years ago

This is 360 with 727 by the way --https://i.imgur.com/2bp4aun.png

Howdy, After a few years of being offline I need to move my truck from a friend's yard. I got it idling OK (video above) but I need to hook up the throttle linkage so I can drive it. I can move it forward and reverse just by using the brakes. It's been so long I forgot how the throttle linkage...

He sold it shortly after completing it I was hotter than fish grease that I missed his classified ad

I'm looking at a 65 Valley with the back plastic window gone but other than that the top is good? Is this one of those "Legendary" items then pay someone local to install?

Settin' Trendz Anybody remember this 64 Valley? I still have pics of his car saved in my Cars folder Sweet ride!

Many moons ago i used to live in 19104