Search results for query: *

Hey guys. Looking to sell a pair of 15x5.5 steelies 4 1/12" bolt pattern. Good condition what's something like these worth? Thanks

Hey guys, anyone have luck with this sending unit? Need one for my 68 barracuda. Thanks for any advice

Wanted 68 barracuda upper dash cap. Must be in Canada for shipping costs. Preferred black. Thanks

Hey guys. Need help from some of you experts This past weekend I installed new cooler lines on my 2010 F150 ( 4.6 140 KM) So I thought I would drop the pan and replace fluid and filter. Now a few days later I relize I put the wrong fluid in damit, I see...

1968 Dart AM radio, working when removed good condition. 60$ Canadian. Located in Sudbury Ontario Canada.

Hey guys I am running a 68 383 recently rebuild with std volume oil pump, running 10w30 with a Wix filter. My oil pressure warm is 13ish PSI, is there something I could do to increase PSI to say 20 warm? Thanks for any advice.

Hey guys.. I'm thinking red line tires.. My original red line tire spare is still in trunk What do you think?

Hey guys. Just wondering about hyd lifter preload Adjustment. My 68 383 has comp adjustable roller rockers I adjusted the aprox 4 -5 years ago, I noticed after the engine warms up I can hear a few lifters clacking ( I hope lifters anyway lol) I'd like to pull the valve covers and re adjust to...

68 dart AM radio worked when removed 68 dart random parts ( also glove box door not in picture) Prefer to sell as package 150 $ CND for all Located I Sudbury Ontario Canada Will ship

Old school Motorola Reverb unit, worked when removed. 100$ CND OBO Located in Sudbury Ontario Canada Will ship

Hey guys Anyone else Having Problems...

Hey guys I just thought I'd share my 68 barracuda steering wheel resto.. I have a car show ID like to go to tomorrow so I started a little steering wheel resto today at 1:00.. The wheel had 7 or 8 cracks I cleaned and filled with bondo followed by a quick prime.. ( I had 2 part epoxy but the...

Hey guys . I suspect my mechanical fuel pump is a little loud (68 383) I'm thinking of replacing it . I thought I read somewhere you could temporarily bypass it by pinching off the fuel line.. Or am I dreaming that? Thanks

Hello..... looking for a good upper black dash pad for a 68 Abody.. For now looking in Canada only due to shipping costs.. Thanks

Hey guys I'm dropping my alternator (68 barracuda single field) off at a local shop for rebuild. I've owned the car for 7 years, before me it was stored for years so might even be original alternator. Is there anything I should tell the shop when I drop it off? I'm assuming my alternator is 55...

Hi everyone.. I took my 68 barracuda for a nice ride tonight.. 65 miles , I recently installed A new cluster so had a close eye on everything. It ran great , so for the heck of it when I got home I put a volt meter on the battery and it's reading 13.05 volts ( with engine not running) seams high?

Hey all I'm replacing the red and black female ammeter connectors in my bulkhead connector. I ordered them from a local supplier, do these look like the correct part#? Also does anyone have a part# for the male connectors if I need to change a few? Thanks in advance

Hi all Just wondering why my picture quality is so poor on this site, I have a hi quality cell phone that takes incredible pictures and also a gold member ( If that matters)... is there something I'm missing when creating my posts? Thanks

Hey everyone, I've been working on getting my cluster back together (68 barracuda) after a long 3ish years. I've updated my tach ( RTE tach kit) and added a solid state limiter (RTE) . I've posted a few pictures, does everything look correct as far as in proper order. I've had it apart so long...

Hey guys I'm doing some work on my 68 barracuda. It's a 383 S matching #. I have upgraded to MP electronic ignition and cracked back's headlight relay kit (that I still have to install) I want to leave the original amp meter (good idea ?) I bought a sunpro volt meter that I was going to...

68 barracuda taillight lenses. Driver quality. 100$ Canadian plus shipping. Located in Sudbury Ontario Canada.

Hey guys. Does anybody know the 2 ( or possibly 3) different gauge sizes of wires going through the bulkhead connector (1968 barracuda383s)? I'm purchasing a new bulkhead connector and a few male and female connectors incase I have to replace a few, the website I'm ordering from has 3 or 4...

Hey guys What's my opinions for front speakers for my 68 barracuda. My radio is a AM/FM . I assume I need 8 ohm speakers? I am Considering 2 X 3.5" speakers and wiring in series to make 8 ohms. I also thought of having my original reconed but it looks bad and nobody locally does it. My system...

Hey guys. My factory tach on my 68 barracuda was not working, so I installed a new tach kit from Realtime Engineering, after installing the new tach board I tested the tach on my car, 12v to tach, - Neg on coil to tach and grounded the tach case ... started car up and the needle does not...

Hey guys I'm about to put my bezel back together in my 68 barracuda, I have a repop bezel. Should I paint the backside of the cluster area to make gauges brighter? It is chrome plated now. Thanks

Hey guys I'm getting ready to put my cluster back together in my 68 barracuda, my indicator lenses are pretty cloudy after 50 years , I see they are available on eBay, put seeing with shipping it would come out to about 100$ that's our of my budget. Has anyone made there own or cleared up...

Hey guys Got the baby out of storage today.. Now for the dash resto.

Hey guys I'm picking up my 68 barracuda out of storage this weekend and need a new battery. Does anyone have the dimensions of the battery to fit snugly in the battery tray and hight? Thanks in advance

Anyone know if these are A body seats The guy says they do not fold? Thanks

Hey guys my buddy picked up a dual 4 intake, the previous owner claims it was off a 426. I have not seen it in person. Can someone identify please Thanks