Search results for query: *

Hey, I have for sale the trunk lid off of my 1968 Notchback, it's in pretty good shape, some minor surface rust under the lip, but nothing that couldn't be sanded off or is unusual for a 50 year old piece of sheet metal. It is located in Eugene, Oregon and I'm asking $250 obo plus shipping...

For sale is a brand new, still in the plastic and new box, Speedmaster 1-147-028 intake manifold. It has dual bolt pattern for both LA and magnum style. Brand new on Summit is like $226 right now, so how about $185 shipped in the lower 48. Located in Eugene, OR

So on my 340 currently, I have the 90 deg filter adapter that goes on with the big hollow bolt. I'm going to be relocating the filter so I got the Canton adapter. I'm assuming that I need to pick up a short nipple and thread it into the block in order to use the Canton adapter?? Any old...

Hi, I have a set of J Heads casting #3418915 and they decode to 1970-72 360. They have new hardened seats and stainless guides. I do not have any rocker shafts or rockers to go with them so BYOR. 2.02 intake, 1.6 exhaust. They had .008" shaved off the deck. Other than that, they are almost...

I have for sale a used Fitech FCC. I bought this in December of 2016, and have put lots of miles on it with no headaches to speak of. I just finally broke down and put an intank Walbro pump in my Barracuda. I do not have any of the AN fittings or fuel hose that came with the kit originally...

Hi, I have an unused, still in the box, X-pipe from TTi, part # XA25MP for 67-76 A-Body's. Located in Eugene, OR. New, these are $280 + shipping. I'm asking $225 + the ride. Thanks.

I have yet again a dead vacuum advance pod. I've gone through at least 3 in the last couple of years. Anyone else experience this? Is it just the ethanol that's eating them up?

Up for sale is a manual gearbox that came out of a 1968 Barracuda /6 donor car. Part number is 2537350. Aside from needing a little bit more degreaser on it, it appears fine. Feels tight when turning. I'm asking $125 obo plus shipping from Eugene Oregon 97402.

Hey, I have for sale the trunk lid off of my 1968 Notchback, it's in pretty good shape, some minor surface rust under the lip, but nothing that couldn't be sanded off. It is located in Eugene, Oregon and I'm asking $250 obo plus shipping. Thanks for looking.

Hey, I've had this forever, I don't need it, so I'm letting it go. My lower 1/4 will probably rust out now, but so be it. This is as you can see the lower, passenger side, rear 1/4, trunk extension, and part of the rear valance below the trunk from a 68 Barracuda. A great piece of sheet metal if...

I have a set of door striker jamb plates, they came off of a Barracuda but fit a whole bunch of A-bodies. I'm asking $60 plush shipping obo. Item located in Eugene Oregon. Thanks for looking.

I swear I cannot understand why my coolant isn't running at least at the thermostat temperature, but it isn't. I have a 180 deg high flow thermostat, and when it's cold out, running down the highway, it will just get to 160. Once I stop, and maybe putt around a parking lot, it will eventually...

Hey, I bought this mirror brand new a few years ago and was going to install it on my Barracuda, but I changed my mind. It's just like this: 67-76 for Mopar A Body 65-70 B Body Outisde Chrome Door Side Std. Mirror - RH Anyways, I'd take $75 plus shipping OBO from Eugene Oregon. Thanks for...

Hey, I have this back glass out of a 1968 Notch. It's in good shape, not tinted or anything. I'll take pictures tonight. Shipping is going to be expensive, but you should know that. I found one new for $362 plus freight shipping online, so I'm thinking $175 plus shipping OBO from Eugene...

Hey, I have this set of hood inserts from a slant6/318 car. The driver side has all studs intact, the passenger side has 2 broken studs. I haven't tried it, but I would probably get some really good epoxy and a dremel tool and could probably get something to bite and fix them. Anyways, they...

Hi, these upper control arms are from my 68 Barracuda, I switched them out for tubular control arms from firm feel quite awhile ago. They have really good looking bushings on them, I had replaced them with energy suspension bushings, and the ball joints are in good shape, Moog K7022's. I had...

Hey, I've had this forever, I don't need it, so I'm letting it go. My lower 1/4 will probably rust out now, but so be it. This is as you can see the lower, passenger side, rear 1/4, trunk extension, and part of the rear valance below the trunk from a 68 Barracuda. A great piece of sheet metal...

Hey, I have this brake distribution block for sale. I believe they are the same for 67-74 A-body though. It is not a prop valve. Asking $50 plus shipping obo from Eugene Oregon. Thanks for looking.

I have a set of door striker jamb plates, they came off of a Barracuda but fit a whole bunch of A-bodies. I'm asking $60 plush shipping obo. Item located in Eugene Oregon. Thanks for looking.

Hey, I have (4) 14" hubcaps that are in pretty decent shape, the black paint is in need of replacing, but overall, they are in decent shape metal wise. $50 plus shipping. Item located in Eugene Oregon. Thanks for looking.

Hello, I have a Lokar braided 727 kickdown cable kit. Everything is there. They go for $72.97 + $9.95 for shipping on Summit https://www.summitracing.com/parts/lok-kd-2727ht/overview/ so I was thinking $60 shipped in the lower 48 obo. Item located in Eugene Oregon.

Hey, I've got some slightly used Dynomax mufflers for sale 2 1/2 in/out. I only ran these for a short amount of time. I loved them, but for a daily driver, they were a little too loud, I went with the super turbos instead. They are in like new condition. They go for $70 a piece on Summit...

Hey, I just removed these splash shields from a 68 Barracuda, they need cleaned up and of course the rubber seals are gone, but otherwise they could be cleaned up, blasted, and painted and put to use. Asking $50 plus shipping obo. Located in Eugene OR Thanks for looking.

I have a set of 14" x 5.5" 5x4 ralley wheels with good beauty rings and center caps. The argent silver is even in good shape. What's a set of baby bolt rallye's worth these days? Thanks

Hey, I've had this square back alternator sitting on my shelf for a while now. I ran it for just a little bit of time before switching it out for a bosch style higher amp one. The double groove pulley was removed because I had my March serpentine pulley on there. I think I have the double...

I believe this is a Milodon 16250 (M brand in pic), or a Mopar Performance P5249558, it is slightly used. I ran this on my 340 for just a little bit before getting a Flow Kooler brand. It is virtually new. Asking $45 shipped obo, located in Eugene OR

Hey, I have this wideband O2 controller and sensor that I got from 14point7.com a few years ago. It utilizes a Bosch O2 sensor like this one: https://www.amazon.com/dp/B000BZI4ZW/?tag=joeychgo-20 and has a gauge like this one: Solid Air Fuel Ratio Gauge and the controller and a length of wire...

So I have these 4 points style distributors, only 1 of them has the part # tag still on them. It is 3438422. I figured someone might want them for parts, it is hard to find advance springs anymore. $50 shipped obo. Located in Eugene OR

Summer cleaning continues and I found these in a box, figured someone could use them. They look an awful lot like these from Mancini Moroso Solid Steel Motor Mounts so I figured $25 shipped is a good deal. Item located in Eugene, OR Thanks for looking.

So I was going through a box of parts I have last night, and I found a pair of solid steel motor mounts. Not the brackets that bolt to the motor, but the mounts that would normally be rubber sandwiched between 2 steel plates with the offset studs. Does anyone use those? Should I put them up...