Search results for query: *

Anybody have any W2 rocker setups for sale? Anything from Econo to race

I’ve got a 360 long block that’s built but never ran yet, it’s got the Mopar Performance 509/292 can in it. I was wondering if it would work on a supercharged application (B&M blower) or should I change to another grind

I bought this partial turbo kit at Carlisle a couple of years ago. It’s all new and I was thinking about putting it on my old truck. Can anybody tell me what this turbo would support, cubic inch wise, and how much boost I could expect to make? I’m guessing not a lot but it might still be fun

I’ve got a 63 Dart wagon and the tiny front drums are worn out. What’s the best kit to change to disc and keep the small bolt pattern. Apparently something was different between the 63’s and the later models

ok, who knows what’s going on with Schumacher? They have discontinued a lot of items and are perpetually back ordered on most others and somebody on one of the other groups I’m in said he had offered to sell him the company. So is he going bankrupt? Are they on the way out? That would be a shame...

ive got a 63 Dart Wagon that’s a slant six and it’s in real good shape so I was considering maybe putting an aftermarket fuel injection setup on it. Anybody done this? What did you use? And what were the results?

ive done a bunch of 4 speed swaps over the years but always on the 67 up vehicles. I’ve got this early clean Dart Wagon that I would like to convert to a V8 and a 4 Speed. Is the 63-66 a bolt in swap or is it more involved than that? I have a later 60’s 4 speed and all the parts but I know the...

i picked up a set of EQ heads with valves and I’m getting ready to assemble them for my 408 Magnum. The cam I have will have right around 550 lift with 1.7 roller rockers I have. Who makes a good valve spring and retainer for this application.

i have a brand new set of Magnum EQ cylinder head bare castings that I will take $550 and freight for. They cost $311 each from Summit and Jegs. Located in Louisville Ky. I'm going with a set that takes the LA intakes.

I have an Edelbrock Victor intake that is Jet Hot coated and has never been modified. Appears to be brand new. It's more than I need a for anything I'm building so I would sell it for $250 and freight or trade for another small block intake for either LA or Magnum motors. Located in Louisville Ky

I have a few of the forged steel Mopar Performance 4 inch stroke crank shafts brand new in the boxes, I have some with 318/340 mains P5007252. These are 4340 forged cranks made to be internally balanced. They cost $1085 at Summit And Jegs I'm asking $700 each. Located in Louisville Ky.

I have a pair of the Chapman ported Stage VI heads from Mopar Performance part P4876383. These are the bare heads and they cost $2475.96 Each at Summit or Jegs. Closer to $2800 each from MP. These have a raised intake runner which allows the use of an RB(440) intake on a B engine. They can be...

i picked up a 472 Crate Hemi and since it's only got 9.5 compression I thought it might be a good candidate for my BDS 671 blower. Everyone that I've talked to says to stay with a 110 LSA on the camshaft, the cams that came in it are 108. So what's everybody running for camshafts on their blown...

i have some Mopar Performance 4340 forged 4 inch stroker cranks for the 318/340 mains. They are part number P5007252. Summit and Jegs get $1085 for them, I'm asking $700. Brand new in the factory boxes.

I have a pair of the Chapman ported Stage VI heads from Mopar Performance part P4876383. These are the bare heads and they cost $2475.96 Each at Summit or Jegs. Closer to $2800 each from MP. These have a raised intake runner which allows the use of an RB(440) intake on a B engine. They can be...

i got this 440 block basically free and was wondering if anyone had ever run a block with a similar problem

i just traded for this 472 Mopar Performance Crate Hemi and of course it's been sitting a while in the crate. My first impression would be tear it down and check everything before trying to start it. It was one of the Cummins built motors and I've heard some horror stories about them. Anybody...

I have this 2012 Challenger R/T Classic edition that my daughter bought back in 2013. It's got 75,000 miles on it and is in excellent shape. I bought her a new truck so she gave me the Challenger to sell or trade for an older Mopar to stick my 528 Hemi in. I'm asking $17,500 or would be...

im building this 408 for a car that will probably end up getting raced more than anything, mostly just trying to use up all the parts laying around my garage. The short block is all forged, Scat crank, Eagle rods and Probe flat top Pistons with valve notches. They have a zero deck. I have a...

i have this 408 that I have been building out of junk I've been digging out of my garage, I've come down to choosing between this Comp cams Hydraulic, CRS 305H10 which is 525 lift 305 duration 110 centerline, duration @050 is 253. Or the Mopar Performance 557 lift solid cam which is 296 duration...

i have a chance to buy this 76 Volare wagon that's already set up for a small block and automatic. I was wondering how hard it is to change it over to a 4 speed? I've done A,B, and E bodies but never a Volare. I already have the blowproof, A body 833, Centerforce clutch, and a Hurst Super...

anybody have a set of A body Hemi headers they want to sell?

i probably have 10 sets of E body brackets but I can't seem to dig up a set of A body ones out of my garage. Anybody have a set they will part with?

i have a 408 that needs a home and while shopping around I found a Jeep DJ body (postal Jeep) with the sliding doors on the sides. It's 2 wheel drive and I know they originally had a 727 in them so I would need to build motor mounts and exhaust. Weighs 3400 and has an 80 inch wheelbase, can we...

not an A body but another project I have going. A few years ago I bought a truck pretty cheap with a blown up 4.7 in it so I pulled it out to replace and couldn't find one for sale so I rebuit it which got pretty costly because it was thoroughly destroyed. To make a long story short, between...

im thinking about buying a 2016 Dodge Ram 1500 crew cab Limited pickup for my daughter with the Eco Diesel V6 and was wondering if anyone here owned one and what your opinion of them is. I've had the chance to drive one and they are pretty torquey little motors but I would love to hear the...

i have a set of the W2 race heads that have never been assembled. They are the 65cc closed chambers for 59 degree block(stock small block) they also have new valves. I got these and a couple of other parts in a package deal so I really don't need them. PArt number is in pictures. Asking $900...

ive had literally hundreds of Mopar's over the last 40 years and have built numerous motors but I've never fooled with a 5.7. I have one laying in my garage out of a Chrysler 300 that I bought as a core and I'm trying to figure out if I want to build it or just let it go. I was wondering about...

this is a brand new Mallory Super Mag 2 with the transformer will fit small block Dodge and if I'm not mistaken will also fit early hemisphere, 331,354,392. Asking $550 plus freight. It cost over $750 just for the magneto.

been listening to traditional Christmas music for a couple of months now and decided to change it up tonight. I played Robert Earl Keenes "Merry Christmas from the family" and then Dan Hicks "somebody stole my Santa suit" now I'm looking for some more. What's your favorite non traditional...