Search results for query: *

I picked up a 73 Duster that was supposed to be a 440 big block but ended up being a 65 361bb. I was a little pissed at first but got over it because it still runs and drives fine has the 727 and 8 3/4 rear decent interior and body. But my issues have started now. I installed a kick down cable...

Im thinking about selling my Duster ive been working on the past few months. I have been putting it back together slowly but surely and have now gotten it to a running driving and stopping project. Here are the details on it: 318ci 2bb /904 Trans (i think original) Factory A/C Manual Steering...

So ive finally pieced my 74 Duster 318/904 together from a box and car full of parts. I have it to where its running and driving now. But now for my issues: Takes a while to start turns over fine and will finally kick over and start about 6 or so tries. Transmission is leaking out of the...

So im trying to find where my issue is on my 74 Duster with not starting. I can jump the car and it starts fine and run fine when disconnected but then it will not start on its own again after about 10mins. The battery is new, voltage regulator is new. It also keeps blowing the number 7 Fuse for...

I got everything hooked up on my 74 Duster 318 with A/C to what i thought was the correct parts but my blower motor is getting constant power and blowing at a low speed non stop. Did i maybe hook a wrong wire up to the motor that is for my deleted EGR system or is somthing else wrong? *NOTE* car...

I just grabbed a set of mags for $300 and the fronts are 15x4.5 and 15x10 rears. Im looking at the BFG T/A tires. But not sure on the height i need for the front. Im getting 275/60/15 rear and was looking at 155/80/15 fronts but that sounds to tall to me. Would the 155/65/15s be a better fit?

Im looking to sell my bucket seat brackets that i was gling to use in my Duster but have since decided to hold off on them for now. It will come with both left and right sides and are new. Im asking $140OBO plus shipping.

Does anyone have a diagram or pictures of the OEM kickdown installed on their car? Im trying to get mine done and since it was apart before i got it i dont know how it went. Dont want to dump much more into this thing and get a lokar kit so want to stay OEM for now since the car its self is stock.

Im looking to sell a couple of Carbs I picked up. One is a 600CFM Vaccume Secondary that I just finished rebuilding. The Other is a 650CFM spread bore that needs a rebuilt and missing 2 screws on the bottom plate im sure i have a some in my bolt bin that fits them. The 650CFM will come with the...

Putting my car back together from previous owner and noticed half of my kickdown is missing. So I am looking for a cheapo kick down linkage for my 74 Duster with a 2bb 318/904. Doesnt need to look nice just needs to function well enough to drive the car into my garage before I take leave. Im...

Hello everyone I am looking for a 360ci engine located in Southern California. Not looking to spend a whole lot as i just want a stock one or one that needs a little work like heads cleaned up etc.

I'm having hell in a hand basket in my 440 now. The distributer I have is a pita because I've never seen it and can't find a diagram for the wires to go on to it so my car is backfiring and won't start and I have the fireing order right I believe.18436572 not sure what's going on.

Hey guys back again but with a better project. Picked up a 1974 Duster with a running 440 and 727 tranny. Got it for a heck of a deal also only gave $3300 for it. I got almost all the lights working minus turn signals and 4 way hazzards (had the hazards but they stopped again). Brand new bulbs...

As title says I have a few problems with my 440 in my 74 Duster. I got the car a few days ago for $3300 here in Colorado. The problems I'm having are as follow: Dieseling after key is turned off, can't go WOT fast have to roll on and even then cant go past 50mph or 25% throttle if that without...

As title says I'm looking for a 70-76 duster with a v8. It must run and drive and be floor shift car auto or manual. Engine size doesn't matter 318 340 360 etc as long as its a v8. I live on Ft. Carson, CO but can travel to get a good car. I will have about 4-5k to spend come January. So please...

Ok so the time has come for a NEW car. I how been looking around and narrowed my choice to a 2013 Challenger R/T Plus or a 2014 Camaro SS. I admit I'm a Chevy guy at heart but the Challenger blew me away with the interior space. What do you guys think about both? Pros and cons on both. And no I...

As title says im looking for a Duster. Must have little to no rust. Has to have a v8 also. I would like a 340 or 360 to be in it but will take 318. Would like a floor shifter or a 4speed. It must run and drive. I live in Ft. Carson, CO and can travel to get the car if its not to far. Interior...

So about a month ago i sold my 75 Duster and been looking for another Mopar to restore/drive around. I was doing that with my Duster but just no money was coming in and i am leaving for the Army in January. So i was wondering what cars would be out there on a $7000 Budget. Its just has to be a...

Ok so i am trying to get my Duster started to sell faster and it is gettiung no power whats so ever to the car. I cant even jump the starter to even turn it over. Would the cables be corroded enough to cause this or is it something else?

Once again im posting this i need it gone im leaving for the Army in January and will not have any where to put it when i get to where ill be stationed. Its a 75 Duster 360 (A factory L Code car not a clone). Still has a 360 w/904 tranny in it but is not the original. Has a big cam in it...

As the title says i lost my job so have to sell the Duster. I was putting the money into it to have it running soon but then job went away. So now its up forsale. Has a nice built 360 with a .520 lift cam, torker 340 intake, holly 750 vac sec carb. w/904 tranny 8/34 rearend. needs to have drive...

Ok so i am finally around to getting some more things for my 75 Duster 360 and now am stuck. Does anyone have a list or a link to a website with all of the electrical sensors on it? I have a new Ignition control and getting a new ignition ballast but have no idea of the names or part numbers of...

I have a Mallory electric Distributer on my Duster and was going to put a new MSD one on but i have no timing light or anything so would i need to get one or is it possible to do it with out messing with the Timing on the engine? Sorry for the noob question never done a Distributer before just a...

I need the following for cheap jus to get it started here is a list: Alternator Alternator Bracket with bolts Electronic Distributer pigtail Oil dipstick Nuts and washers for Control arm Shaft Wiper arms wiper motor wiper harness throttle cable and every thing else to go down to tranny for a...

Ok so i am looking for a running and driving v8 Duster to cure my V8 needs and i found a 74 or 75 not real sure of year (Built in March 1974). But i went and looked at it and took alot of pics to get an opinion from other people that know more about value than I do. It has AC and a Folding rear...

I have pretty much lost interest in my 75 Duster 360. It is a very solid car and a true 360 car L code Vin. It has a few things i had to replace on it like the K member its a early 70s but i have the stocker just need to have a mount rewelded on it. Has all the wires for it but needs the under...

Ok so a while back i was gonna see if i could finally start my duster with the key so i took off all the parts to run the engine off of just the coil and a battery. Now i know i need an Ignition Box but also i am wondering would not having one of these stop the headlights and all from coming on...

There is a little car lot selling a 75 Gold Duster with a 318 in it, its pretty effing nice its said its the original paint and matching numbers but idk. Its a column shift auto. Inside is clean but has black cloth seats up front and black leathers in the back. Exterior it has mix matched mirros...

I am looking for a cheap transmission crossmember with the bolts that will fit a 1975 Duster 360 i need it for a cheap price if anyone has let me know please.

Ok so i was at a local u-pull-it and saw a 85 Chrysler GranFury 318. I know these cars did have the A727 option with them but wonder how do you tell the difference between a A904, A999, and the A727. Im pretty sure its not a A904 because i have one on my 75 Duster and it just looks totally...