Search results for query: *

I have both bellhousing and flywheel. I sent you a message with info. Let me know.

I have a cast bell housing out of a 67 or 68 barracuda $75 plus shipping. The opening is 4.30. The bell has the bracket for the clutch fork and a new rubber boot. The fly wheel is 122 tooth and was resurfaced before being put on the shelf. $75 plus shipping. The items are located on...

I have a brand new unused raybestos 450-1033 idler arm in the box if you are interested. Let me know Anthony

I have a bellhousing cast number 2806081 and flywheel for sale. Fly wheel was resurfaced beforenit was shelved in the garage. I believe it came out of a 67 barracuda with a 273. Both in very good condition. The parts are located on long island in new York. Make offer.

Just picked up a 340 from the cousin of a friend. He did not know much about the motor as he received it in a trade. As far as I can decode it is as follows: Block 2780930 date 6 30 70 Heads 3418915-G J heads Intake 3512100 date 6 23 70 Pistons marked 030 and have 4 small half circle...

Anybody know where I can get the studs to bolt scoops down to the hood. I only need two studs and 4 of the nuts. I did find a complete set for $100 at the PADDOCK but they do not sell them seperately. For my amusement I asked how much shipping would be for the complete set (16 studs and 16...

I have both front and back Hellwig bars on my 72 dart. Awesome product and great customer service. I had ordered them a long time before I actually installed them. By the time I got around to installing them they upgraded a few things on them. They replaced the old style hardware with the...

I found them on E Bay. I also called them directly to make sure they would work with my application. There should numerous pairs for sale still on ebay.

I am about ready to completely rebuild the front end of my 70 dart with 73 and newer brakes and all new suspension parts. It is a /6 right now but will be a 340 in the near future. I want to upgrade the torsion bars while I have everything apart. I am thinking about buying a set of 1.0...

Thanks for all the replies. I think I will go with the regular lines from a 73. Quick question about the proportioning valve. Are the after market adjustable valves easy to install and do the they operate as well as the stock valves.

I am converting my 70 dart from sbp drum to bbp disc brakes. My question is I want to order a complete stainless brake line kit but not sure for which year I should buy. When I do the conversion I will be using a proportioning valve from a 73 up disc car. Do I buy the stainless kit for a 73...

Thanks Rumble. I picked up the new motor this morning from Advance (second one) and installed it. As per Murphy's Law there was still nothing going on. After about a half hour of trouble shooting I found that the new motor was not grounded properly because of the heavy coat of paint that they...

Well I purchased a reman wiper motor from Advanc Auto(Cardone) and when I open the box it looks like a piece of crap. I remove the old motor, change over the gromets, ballast resister and spend the time to mount the motor to find out it is dead. I take the new motor out and remount my old one...

Thanks for all the info. I will try to do it under the hood first. I was just afraid to put too much stress on any of the linkage when trying to get enough slack to be able to remove the nut that holds it to the wiper motor. One last stupid question. When I get the linkage off and put the...

I have to change the wiper motor in my 70 Dart. I am trying to remove the middle portion of the fake wood dash so that I can get the radio and heat and A/C controls out of the way so I have a straight shot at the bolt that holds the linkage onto the motor. I feel like a moron but I can't get...

Still can not get my wipers to work. Anyone know where I could get a new ballast resistor for a 2 speed wiper motor. I want to try replacing the resistor before I go ahead and buy a new motor.

The wipers on my 70 dart with 2 speed wiper motor stopped working. The wiper motor is getting juice and the switch appears to be working. When I turn on the switch you can hear the motor making noise at both speeds. I checked the linkage and everything appears to be in working order. I...

Thanks for all the input guys. I guess I will keep the 650 on this build and try to tune it. When the 340 is built I will probably get a 750. Thanks again for all the help.

I have a 72 318, stock bore, edelbrock performer cam, edelbrock performer intake manifold, 302 heads with mild porting, stock exhaust manifolds, 3:55 sure grip. Right now I have a Holley 650 carb on it. Is this too much carb for the motor. If it is what size carb should I look into. I was...

Thanks for all the replys. I think I will piece together everything. Rock auto seems to have good prices. They carry a lot of Moog and also Delco parts. Anybody have a preference. The Delco stuff is more expensive than the Moog. Any input would be great.

Looking for a pair of plain jane 15" by at least 6" wide BBP steel wheels that will accept a 9" dog dish cap.

I have been pricing front end parts. I contacted Performance Suspension and they have a poly kit for my application for $290. I asked if the ball joints and other parts are american made. The rep stated that he gets his stuff from Federal Mogul and cannot guarentee that all of the parts are...

I am doing a disc brake swap on my 70 dart. I have the parts from a donor 73 duster. Unfortunatley I was not able to get the proportioning valve from the donor car. I will be going to a manual front disc/rear drum set up. Anybody know where I could buy the correct proportioning valve for my...

Thanks for all the help guys. I guess it is time to start dropping some $ on parts. The front end on the 70 is SCARY right now.

I am just about ready to do a disc brake swap on my 70 dart and while I am at it I am going to rebuild the front end. I have the spindles, calipers, dust shields, rotors, upper and low control arms from a donor 1973 duster. My questions are: Can I use the lower control arms that are on the...

Just wondering if anyone knows where I can purchase the throttle cable stud that bolts onto the throttle lever and allows the clip on the end of the throttle cable to slide over. I believe it has pre drilled holes in it for a pin to keep the throttle cable from coming off and the other side for...

Picked it up for $1300.

Just figured out how to post pictures. Here are a few pictures of my the latest addition. 1970, 225, /6, 904. All original paint and in real good shape for a Northeast car. http://s732.photobucket.com/albums/ww330/limopar/

Anyone have SBP disc brake setup for 70 dart. I have drums right now and want to go with discs. I have SBP wheels all around and do not really feel the need to go with the 73 or newer set up. Also looking for 8 3/4 a body rear housing in the NY area. Let me know.

I have a 72 dart w/318 with power steering and a/c. I have removed the a/c. Could anyone give me an idea of how the belts should be installed now that the a/c components are gone. My crank pulley has 3 grooves, alternator has 2 grooves, fan belt pully has 1 groove an power steering pump has 1...