Search results for query: *

  • Users: OL DODGE
  • Content: Threads
  • Order by date
  1. O

    [WANTED] Dodge Omni parts wanted

    Looking for 4 lug "pizza" wheels (mopar # 4284111-came on Shelby chargers in 1984 &85)and the exhaust pipe that goes into the muffler (mopar #4301905/AP #24725} Thanks for the help
  2. O

    [WANTED] 4 lug front drive Charger/Omni alloy pizza wheels

    Yep back to looking for them . Thought I had a set to buy but turns out it was a con artist.
  3. O

    [WANTED] early Dakota fender flares

    Looking for driver quality 1987-89 Dakota Sport fender flares in good useable condition. They can be boneyard take-offs , I don't really care as long as I can install them Thanks
  4. O

    [WANTED] In search of driver quality 84 Shelby Charger wheels

    looking for four 4 lug alloy Shelby Charger wheels -they call them the "pizza wheels"- they have 16 round holes around the edge. 15"x6" driver quality is perfect for me. I have 8 of the 5 lug version but don't feel like doing a suspension swap just yet(if at all....)
  5. O

    [WANTED] tuning info 87 Omni and a used or new carb

    I am looking for a Holley oem carb for an 87 Dodge Omni list # 40296 or 40303. They may also have been used on other Mopars of that year / If you have any tuning info on these also i sure would appreciate it as mine keeps running too rich. I have changed plugs,wires distributor ,air pump check...
  6. O

    Omni GLH stuff found

    I met a pretty cool dude recently who has quite a bit of GLH stuff and while I am not interested in any of the transmissions or stuff like that I am wondering about the value of the ground affects and used wheels as I recently bought a plain Omni from him and am considering a fair price to offer...
  7. O

    [FOR SALE] Parking brake parts -11" Bendix

    I have 2 sets of 11" Bendix parking brake parts and there is also other strut bars that have the closed "loop" ends as opposed to the 2 finger ends . Also pictured at the bottom on the right are the 10" bendix strut bars but I don't seem to have levers for those. I'd be happy to get $10 plus...
  8. O

    [SOLD] Mopar cam degree wheel and keys

    two degree wheels - one unused Mopar & one Mr Gasket very used , Keys for small block and big block cam advancement , one small block solid lifter and one adjustable pushrod for small block. $20 and shipping
  9. O

    [WANTED] a/c delete pulley and bracket 1990 318

    Anyone know where I could find a non a/c pulley and bracket setup for a 1990 Dodge truck 318 ;Mopar p/n 4483064 ? The boneyards around here crush most stuff this old-it has the double belts on it-not serpentine set up like the better later years. I have to do a timing chain on mine and the a/c...
  10. O

    technician job experiences

    This is a generic question in nature -I've been a tech at a mom and pop shop for a long time (I am a non-family employee with the most seniority)and am thinking of going to a tire chain or dealership job-vastly different enviroments -so have any of you done a similar thing. I've thought this...
  11. O

    general body work question

    I sometimes get farmed out from the shop where I work -I go down the street to a body shop and notice the guy tearing off accident damaged sheet metal with no welds and ask him about it and he says the factory "glues" a lot of panels now and it"s as strong as welding. That gets me thinking ( OH...
  12. O

    FOUND! Holley carb float gremlin

    Awhile back I posted about the search for a better inline 5/16" fuel filter thinking the one I had wasn't up to the job. Some back info includes that I have a recent / new fuel tank ,filler neck , line , and fuel pump. I changed needle and seats as well , going with the best quality ones I could...
  13. O

    best flowing 5/16" fuel filter?

    Has anyone tested underhood 5/16" fuel filters for the best flow-I'm talking worm clamp style-nothing fancy but very effective(i.e. Keeping it simple) Reason I ask is because I have one of those glass/thread together jobs and do NOT like the fire risk and don't think they do that great of a...
  14. O

    Anybody watch MTV on New Years Eve?

    Within a span of 2 1/2 hours last night there were 4 videos with early A-bodies and one late C-body in songs like Everclear's"Father of Mine",P.O.D.'s "Alive",the B-52's "Deadbeat Club",etc I'm glad I stayed home last night,however my wife thought I was nuts getting excited over seeing cars in...
  15. O

    sticking needle/seat on Holleys

    I am curious-Holley's needle/seat combos can be finicky at the worst times (as in when they stick and you are in traffic and feel it start to load up ),so has anyone found a really good fuel filter or for that matter a better needle/seat set up that seems better than the standard Holley fair. I...
  16. O

    So what oil SHOULD be used with a new engine AND why?

    So what oil SHOULD be used with a new engine AND why? Here's the thing-my old engine builder said to use straight 30 weight non-detergent oil: The engine builder I have now said to use whatever you would normally use. In the book by Larry Sheppard "How to build a Small Block Mopar".he states to...
  17. O

    is this your 1972 340 block?

    a friend gave me a 340 block with bearing caps for a 72 340 build date 5-26-72 vin of 3G110758 it has overall light rust on it from being in a shed and 2 cylinders would probably need sleeving. If it's your cars',drop me a note
  18. O

    [WANTED] console parts for 73 dart

    I'm in search of the reverse light switch for an automatic shifter on the floor and console floor brackets the stuff can be used.like the brackets could be chopped out of a boneyard car-as long as I can trim off the old floor that's attached to the brackets,that's fine.... if there is...
  19. O

    piston choice

    What are your opinions on using hypereutectic pistons on a street/strip small block using a , let's say a .488"/.490 hydraulic cam My Mopar engine builder once said "don't" ...........the "online" engine builder says they are better than the factory autothermic and forged costs $400 more and...
  20. O

    My heads were milled-effect on compression ratio?

    My heads were milled-what effect on the compression ratio would it be-they are the proverbial "x" heads and this is the first time they were cleaned up with .031" taken off both. I understand there are variables involved here and have seen where machine shops can "cc" the heads but didn't have...
  21. O

    local item for sale -what's it fit?

    scanning the local for sale column -I found this -owner says "it's rare" and "has a whole roll of it"-they want $35 for it......................
  22. O

    A mix of old and new Mopar in one car

    It started life as an old Charger model. i added a shortened chassis from a John Force Castrol funny car(chop frame and steering linkage). Put an escape hatch on the top of the body. Added a "new style" wheelie bar set up and two 'chutes. Updated the side and back windows. Added a...
  23. O

    Did Mother Mopar have stiped vinyl top material in 1974?

    I saw an ad for a guy selling NOS Mopar vinyl top material dated 1-1974 and that it odd as I've seen "Mod Tops" but never striped-it has a white background/base color with amber and gold length wise solid stripes
  24. O

    Chrysler Marine engines

    A 1978 360 marine engine came up for sale recently and I was going to buy it -it supposedly was rebuilt not long ago and that got me to thinking-what kind of compression ratios did they have........it was definitely a 360 marine(special water pump and thermostat housing,etc...). I passed on...
  25. O

    [WANTED] in need of one P3614542 new valve spring

    I have my x heads being rebuilt and it's come down to reassembly time and I get the dreadded phone call-from a reputable engine shop -"hey one of your MP valve springs is missing an inner damper spring". Now the thing is that I bought these springs all new in their little individual boxes off...
  26. O

    B-Body model

    I built this for a friend over the summer just messing around. I made some of the decals myself. It isn't great but it was fun!
  27. O

    1973 Dart seat covers availability

    I.m searching for BUCKET seat covers for a 1973 dart in HONEY GOLD but all I seem to find is BLACK and WHITE. My friend was nice enough to GIVE me the bucket seats complete with tracks . They need to be recovered,but so what! They are in WHITE now and I thought maybe if I cannot find the...
  28. O

    Air gap small block intake -any brand testing?

    I'm wondering if anybody has yet to do a comparison on the air gap intake s that are out now for the LA small blocks. I see there is a "Crosswinds" brand ,an Edelbrock one and one or two others -they look very similar externally -their casting lines and runners and such....... just wondering...
  29. O

    oe radiator p/n 71 Demon 340

    Anybody know the oe part number of a 71 340 Demon radiator or the number that is on top of the tank? for some reason 3443975 sticks in my mind but I'm not sure.
  30. O

    Best 318/x-head /hyd cam combo

    So I planned on building this 318 in my Dart;I have the x-heads getting new stock valves,double springs,etc. I bought a new MOPAR 508" cam from Hendricks but upon opening the box found the brand new cam broken in 2-right about dead center!!!!!! This got me thinking that it may be a bad omen. For...
Back
Top