Search results for query: *

I have a set of nice virgin W2 "Race" heads with flat rocker shafts stands. I would like to trade for a set of W2 "Econo" heads with the cast in rocker shafts cups.

Nice 2.93 ring and pinion. Will take just the ring and pinion for a 741 8.75 or I'll take a complete non posi 742 or 489 8.75 center section. I am located in Western WA. But will pay for shipping

Can I use a floor shift upper (part right under steering wheel) manual column on a column shift ( below the rotating part with the lever) lower power column to make a floor shift power steering column? I have both and was hoping I could mix n match them to make what I need. Sorry I this is...

I have an original dual point from my 273 Commando. Can you convert it to a Pertronix 2. also does anyone have or know where to find a rebuild guide/ instructions for that distributor (If I can't convert I'll rebuild it and sell)? It is just like the picture below I got off the internet.

I have a 1965-6 273 Commando DS valve cover in very good condition. I need a 1967 DS valve cover to match the year of the car and PS valve cover. Willing to trade for one in like condition. Needs to have the 1967 "W" type wire holders.

I am moving from stock type wires to MSD 8.5 spark plug wires. On my Commando there are small plastic grommets that hold the wire to the valve cover. I love the way that looks. Does anyone make these? I have them circled in the photo.

Hi I have the opportunity to get some 69 buckets with head rests for my 67 Barracuda. My question is can I use 1969 seat backs with head rest on the 67 seat base? The 69 backs have a latch and the 67's do not. I was also thinking of using dark green covers front and back and dark green door...

Has anyone used the HGRR688 ignition box? I have heard good things about the Rev-N-Nator but the HRR688 looks interesting. Any thoughts on it or a comparison would be welcome.

Hi all. I have a 1967 Barracuda that has a Thermoking A/C unit under the dash. Does anyone know where I can find parts or a manual for one of these? Pictures to come asap.

So I have noticed over time that the drivers side of the front of my Barracuda seems higher than the passenger side even though the k member seems to be level. It does not look like it has ever been hit but at the center of the wheel arch it is almost 3/4 inch higher. Any thoughts? Build...

I like the look of the later door panels. Would it be a faux pa (?) to have 69 door panels in a 67? I figured since they are soft part no biggie. Anyone have pics of a 69 black deluxe interior in a barracuda fastback?

I was looking to get a new harmonic balancer for my 67 273 Commando. I'd like to go with a "fluid" style one (later to be used on a built360). My concern is that my timing marks are on the left of the engine. Does anyone make this style of balancer with the appropriate sided marks? I was looking...

I am contemplating getting an Edelbrick AVS2 500 cfm carb model 1902 for my 67 Commando to replace the old Carter. One thing I noticed is that the choke arrangements are different (Edelbrock is Manual and the Carter is with the old intake heater spring system?) Now my question. Can I make the...

Does anyone know where I can find this? Been driving myself crazy on the internet trying to find it. Also, is there a Mopar color coded shrink wrap kit out there?

I want to add 3 point retractable seat belts on my 67 cuda. I know this has been talked about but I have not seen any pictures of what I want to do. I am thinking of doing a mount like this. Does anyone have pictures of this type of mount in a pre-70 a body (Barracuda would be best)?

Just wanted to see if anyone is running these on a '67-69 Barracuda? I don't have a pic but they are on American Racings website. I'll try to find a pic. I am thinking these or Magnum style rims.

I just pulled my 67 273 Commando manifold off to replace it with a Performer. Steel intake gaskets came off with the intake. Now when I put the new manifold on with Edelbrock gaskets the damn thing sits to high. I'd have to clearance the bolt holes to get them in. I pulled off the gaskets and...

Has anyone done this? I have this going into my '67 Cuda. Just wanted thoughts on the set up and if anyone envisions any problems. Thanks!

I wanted to post a question. I want to get custom offset steel wheels; who is a good company to look at. Also, do you think my 14" Formula S hub caps could somehow be mounted to the inner portion of the rim to simulate the original look?

I have an odd question. Can you use a power steering "chuck" and not use the power steering pump? Thus fast ratio manual steering? Is there a longevity issue? Reason I ask is I had a pump go out and the steering effort while harder was similar to that of a manual box. I don't mind muscling a...

Looking for a good sounding board. Since the exhaust side of the the Magnum head is "better" than the J head should I use a single pattern cam (Comp 270 magnum) vs. a dual pattern (Comp 274 Xtreme energy) to balance the flow of intake vs. exhaust (I am looking at hydraulic only) or does it...

I thought that a Street Lynx and Hotchkiss TVS front suspension might make a good combo. Anyone have thoughts on this? Better alternatives?

This may have been done before but let's see your pics. Offsets are a must. :finga:

I just finalized my conversion to BBP front discs and rear end parts and I am having an issue with the manual steering. Going straight no issues but once I turn for lets say the first inch of steering wheel travel there is a wobble in the steering. Once I get past that initial inch or so the...

I want to get some ideas for what modern seats and shoulder belts work in A-bodies. I have seen here Sebring seats work well and add shoulder belts as well. Can you post your seat choices and how you may have added shoulder belts either in the seat or connected to the car.

I have for sale the following: 1 pair of 1967 Barracuda 8 3/4 axles with plates, bearings and axles 1 pair rear brakes complete (Small bolt pattern brakes Everything is new) 1 Pair front upper A-arms small ball joint (need new ball joints and bushings) 1 pair front drum brakes (SBP)...

All, Thanks to the great information on this forum and with the help from some members I completed the rear conversion to BBP on my 1967 Barracuda this weekend. It now has 11"x 2 drum brakes, Dr. Diff axles, and new 255/60/15 tires on 15 x 8 Summit Series 55 rims (Not a word about how they...

I recently saw a TV show where they built a 451 out of a 400. One thing that stuck with me was they had oiling through the push rods AND the rocker shafts. They used ball/ball push rods. Anyone ever done this with a small block? What would the advantages be?:violent1:

Hey everyone I need a decent 1967-69 PS column. Really need a floor shift one but will settle for a column shift unit in a pinch. Now the caveat; I need it cheap. If someone has one for $75 or less I would be up for a pm. I can do PayPal.:prayer:

After buying a "C-Body" rear end and finding I can't use the axles to cut down for my '67 Barracuda (thanks for the DOUBLE taper Ma Mopar!) I am just going to bite the bullet and get a set of aftermarket axles. Now the choices are well know as Moser, Dr. Diff, Dutchman, Superior Axle & Gear...