Search results for query: *

Normally I would leave one together but had to pull ales out to have new bearings pressed on. Hopefully I can get it back together tomorrow

I took all my brakes off to replace wheel bearings and now I can't find detailed info on putting them back together. Any help? Pictures or write ups? I have been searching online but can't come up with anything

Pulled the wheels off last month to put the tires on my daily driver but the shop wanted almost as much to swap tires as a new set would cost so I bought a new set and left the dart sitting on blocks until today. Tried to get it done before it hit 70 degrees outside. I really need a shop. Heck a...

You two just motivated the heck out of me. I actually do drive it every once in a while. I need to find an old timer around me to assist with rebuilding a 1bbl carburetor. And the front lug pattern is aggravating. A bbp disc brake swap would make it possible to put the new wheels on and really...

Had a baby. Bought a house. Started a farm. Car got put so far on the back burner that I couldn't even tell you where the keys are

Gatlinburg Tennessee. HUGE car show. I think they do it twice a year. I have only been once when I was a kid but it was crazy

Been helping my little brother work on his 67 Plymouth trying to get it ready for the trip to Rod Run and aint done much to mine. Bought a carb rebuild kit today and I am going to put the old one back on after getting it rebuilt. I have had nothing but trouble since the second I put the new carb...

Probably should have waited on wheels until I got some other stuff done but ran across a great deal for a set of these

360 I picked up out of an 88 dodge ram

Not trying to jack anyones thread but I have a question myself. The A-833...how well does it perform? Reason I ask is because I have a 74 Dart Sport with the ole slant six. I recently got a very good deal on a 360 so I have decided to put it in my car. My car is an automatic right now but has...

Awesome car and great plans. Itll be cool seeing something different out there.

Waiting on tax money to come in so I can buy my disc brake conversion and fix my mix matched lug pattern issue. Ordered wheels the other day(very sexy!) and I just got the awesomest deal on a truck with no title that comes with not one but TWO 360s. I think its getting close to time to swapping...

I read somewhere that my year has upper control arms that I can use in the swap. But then I read somewhere else that it wasn't true...lol. How and where can I find all the info I need on it. I have read through most of the brake threads on here but none of them are my exact car

How does one tell the difference between a small ball joint and a large one? I have the sbp on my 74 Dart Sport. But I do not know which ball joint I have

Dont guess I really meant "race car". I have never had trouble stopping with the 4 wheel manual drums, but I just searched for brake drums and the parts stores dont carry them and cant get them. So...I guess it would make more sense for me to swap the front and maybe even the back eventually to...

Less than one month till Rod Run. This entire Sunday will be spent wrenching. First I have to fix a fuel filter leak and then Im readjusting the valves. I messed up last time I adjusted them by setting the timing with the distributor vacuum still hooked up. Don't know if it will make much of a...

People throw away their left over parts when they disc convert. I dont have the money to buy a conversion or I would. I dont NEED disc because I dont have a race car. I would take them if they were cheap as a drum swap I could find. I have changed my mind and am going to swap the rear end...

Mine is a 7.25 Savannah Ga? What else do you have down there? I am taking a trip that way in a month or so...

Thanks for checking into that. Every time I try to search for parts on the internet or even topics on this website I learn more about how stupid I am when it comes to computers. I have been searching for a 4 speed transmission for the past 45 minutes thatll go behind the slant six. I HAVE NO...

Road trip!! :burnout: I found a Mopar Junkyard less than 5 miles from my house the other day. I never knew it was there haha. Im going to check with them and look around here first

If I mash the gas to the floor it will spit and sputter till it dies if I dont back out whether I am stopped or going 50. Only time it "recovers" is when I pump the gas and then it will pick up like its supposed to

This thread has saved my original /6 74 Dart Sport. Yall make some good points. My little brother has a 318 B Body that I would really like to keep up with but fuel mileage and simplicity are higher priorities on my list.

How hard would it be to find a rear end with the sbp?

I did take carb cleaner and spray all around. Only time it idled up was when I accidentally got over spray in the top of the carb. I turned the fuel WAY down and now it is doing a lot better but still spits and sputters when I punch the throttle. I realized I screw up that I did and am going to...

Hmm. Well dang. Do you happen to know of anything else I could swap it out with?

I have a 74 Dart Sport with different lug patterns front and rear. I would like to have matching so I only have to carry one spare tire. I have 5x4 drum brakes on the front and I am looking for 5x4.5 drums to swap out. If anyone has any or knows where else I could look please let me know. I keep...

Rough running issue is driving me crazy. Rod Run is a month and 1 day away and I still cant seem to get it. I haven't been able to find anyone around me that will work on carbs and I cant find a vacuum leak. Today I turned the throttle way down and it ran a lot better but when I punch the gas it...

Been driving the car lately. Still spitting and sputtering when I mash the gas. I was reading the manual and realized I had to unhook the vacuum from distributor when timing the car so I redid it and it runs better but still not fixed completely. My wife and I had our first child in December so...

Got it running. I can shift the transmission throughout the gears and it idles down a good bit but doesnt die. BUT...when I go to take off it dies unless I pat the gas. I can not get it to pull out without pumping the gas pedal, HELP!! lol

Anyone here in North Georgia know anything about body work? I have some small spots of rust that need attention immediately so they dont spread. I live in Gordon County, 45 minutes north of Atlanta. Willing to travel an hour or two. I can easily hire someone to do it for me but I want to help, I...