Search results for query: *

Hello from Estonia. 69 2dr with 318 Magnum, Holley Sniper, 8 1/4 LSD and 4 speed A833. Was originally Slant6 + automatic and sold to Sweden from where I bought it.

Do I understand correctly that the outer and inner wheel bearings used are the ones used for the original KH rotors ?

Hi, I do not remember was this talked about but is this also an option (similar as mustang rotors): RAYBESTOS 6042R These fit to 76 Ford Granada. Simply I have a cheap option locally.

Hi, So this hub will fit with original wheel bearings and BBP mopar rotors ?

If only mine looked that cool when I got it, would have not painted mine. Would drive it as it is.

Hi from Estonia! 69 2dr Valiant with 318 LA (Holley EFI) + A833 + 8 1/4 with LSD.

I am manly interested in sub frames and floors (as they were done poorly when I fixed it up last time). Rear end, front end, engine, trans all that is sorted and upgraded to my needs.

Thank you for your answere. As I understand then I can use a donor from 67 to 73. Why I am asking about 64 is because I do not live in the States and I don't have lot of cars to choose from. Shipping a 500 dollar car to Europe can cost around 1500 dollars otherwise I would not think twice and...

Hi, Couldn't think of a better title but my question is: Can some one point out what frame, floor, k frame and suspention parts can be used between different year A bodies ? I myself have a 69 2dr Valiant and I'am looking for a donor to get better frame rails, crossmember and inner fenders...

what's greg's username/contact ?

Hi, I'm planning to do a hei swap. Got the kit from TrailBeast and thank you for that. Only problem is that I'm using an toyota alternator (same as delco swap) Diagram here: http://arengineering.com/wordpress/wp-content/uploads/ARE-AR022-proof.pdf Now I have tried to figure out how to...

Hi, maybe you can look at my threat and get ideas on how to to it: http://www.forabodiesonly.com/mopar/showthread.php?t=278933 Kristjan.

Hello from Estonia: Was a slant 6 3 speed automatic Now it is 318 4 speed 2 years ago: Now:

Kit from TrailBeast ordered, now let's wait.

Does he ship to Estonia also :D

Hi, Thanks for the reply! As I undestand then the MSD will work fine just in case buy the correct one (with the ballast resistor). But I might to as 67Dart273 said and leav it alone before I do the HEI conversion. Kristjan.

Hi, I'm planning to upgrade my ignition system (spark plugs, spark plug wires, ignition coil, in future do a HEI conversion) on my Valiant with 318 (came from a 73 roadrunner). First step is to change wires, plugs and coil. For coil my local shop has this...

Sorry for not replying but it turned out quit good. The mechanic took the trans apart and inspected everything, put the trans back together and said that he didn't find anything wrong. I adjust the shifter stoppers (they were very loos). Now I have drven the car for 200 KM and no problems. So...

@trailbeast: Solid-State Ignition or one point ignition (how ever you call it). @67Dart273: as in the tutorial I linked. Kristjan.

Hi, I did the Delco alternator swap (I used an Toyota 4Runner alternator which is basically the same) I used this tutorial and everything should be correct: http://arengineering.com/wordpress/wp-content/uploads/ARE-AR022-proof.pdf Now if all the wires are connected and I switch the...

Also, is there a change to determen what type of an alternator I have, pre or post 70? Here are the pictures: https://www.dropbox.com/s/yfy7zmodc1rqvai/20150806_130844.jpg https://www.dropbox.com/s/kp20tso9izyx9go/20150806_130837.jpg...

So I can't use 70 up regulator and pre 70 alternator ? Kristjan.

Car is 69 engine is from a 73 road runner, alternator is from the original slant 6 (69). Kristjan.

Hi, I swaped an engine from 73 to 69 Valiant. I also bought a newer style voltage regulator (http://www.forbbodiesonly.com/moparforum/attachment.php?attachmentid=132672&stc=1&d=1376351982) And hooked it up, first we forgot to ground the box and bured it, the the altirnator had some...

Does this "slick shift race modification" mean that this gearbox isn't streetable (read from some forum that you have to double clutch to shift down)? If so what to check/replace to make this gearbox drivable ?

Hi, My 4th gear is missing and 3rd gear doesn't come out. First time this happened we opened the gearbox and saw that 3rd and 4th syncro ring pin's have popped out of their place and that's why the 3rd gear is stucked. We put the pins back to their place and it worked for about 6 km...

Hi, I would like to fabricate a proper shifter for my hurst shifter. For that I need some mesurments: https://dl.dropboxusercontent.com/u/19022509/shifterMes.jpg The one I like is this: http://www.forabodiesonly.com/mopar/attachment.php?attachmentid=1714663067&d=1381111049 and...

Hi, I have a 69 Valiant with slant6 and 4 piston front distbrakes. I need to swap the main cylinder and booster and did some research and found two kits from summit: 1) http://www.summitracing.com/dom/parts/ssb-a28151/overview/make/plymouth/model/valiant/year/1969 2)...

Hi, A have 2 questions: 1) Is it possible that slant six with automatic gearbox and smallblock 318 with 3 speed manual share the same starter ? They look the same. 2) Do I need a bracket between the bellhousing and starter because at the moment the flywheel rubs agents the starter "theet". It...

Thank you for replys. And thank you Moparparts for shiping me the bolts.