Search results for query: *

I have a pretty much brand new March Performance 10271 crank pulley for sale. I literally opened the box, held it next to my existing crank pulley, and realized it didn't fit. It's never been bolted to a car. I am outside of my return window. Part is located near the Twin Cities in Minnesota. I...

Do you have a car club or group of friends where you all get together, wrench on each other's cars, go to meets, race, etc.? Although the FABO and online community is big, most my mopar friends in real life live far away, are +20 years older than me, and I see them all of once or twice a year at...

Just making a thread to show how 3D printed parts can be used for our old cars. Feel free to post your ideas, creations, or solutions. I made a little something for the Dart. My inner door handles were cracked, worn, and my arm cushion was falling apart. I took some measurement, worked some...

Hello All, So, my wife and I have been trying to expand our skills and learn new things. We decided to make a Youtube Channel. I wanted to expand my photography skills and my wife and I want to learn how to edit videos. We decided to go to Car Shows and just vlog some of the cars we saw. This...

Hello All, The day has finally come. I am selling my 1968 Dodge Dart GT. It’s a tough decision, but due to new priorities in my life, lack of space in my new home, and some health reasons; I believe it’s time for the car to go to a new owner who can devote their time and passion into this car...

I have a set of 360 Smogger Heads. Supposedly came off of a 360 crate engine but can't verify that. Comes with dented Moroso valve covers. Still has valves inside. I believe the exhaust valves are the smaller size ~1.60". I haven't measured them in awhile. Parts available for pickup in SoCal...

I am selling the front buckets (driver and passenger) and rear seats from my '68 Dart. I'm also including the back panel that goes behind the rear seats. Someone reupholstered them before I bought the car and seemed to do a pretty good job. No tears and still in pretty good condition. They...

I picked up this 273 block from a local FABO member as a backup for my old 273. It is a bare block. I don't have that engine anymore so I'm paying it forward. It's standard bore and as far as I know (or was told) it's a '68 block. That's all the information I have. Parts available for pickup in...

I have a stock, cast 360 crank, rods, and 7 pistons. They came out of my engine before I stroked it. The previous owner supercharged it and when I had my engine guy tear it apart, one of the pistons cracked in half. Pistons have a layer of black char on the top. Will take pictures this weekend...

I have a wide assortment of miscellaneous A-body parts. I have a heater core or two and a bunch of under dash trinkets. I have some of the original AC parts from the Dart but am missing the big components like the compressor and condenser. I also have a couple of strut rods, UCA's (small ball...

489 diff case and open diff. I haven't taken a good look at it, but I believe it has an open diff in it already and I have all of the spare open diff parts from my 489 case that's currently in the car. Sold as is. Parts available for pickup in SoCal. I will not be able to ship the diff. Can...

I have a stock radiator that came out of my '68 Dart GT. It was a 273, 904, AC car. I believe it is a 2 core radiator. I never had overheating problems when my car was stock. Fan shroud (broken) and 7-blade fan included. Parts available for pickup in SoCal. I will not be able to ship the...

I have a pair of A-body, small bolt pattern, 8 3/4 axles. Parts available for pickup in SoCal. I might be able to ship these axles. Can deliver to Spring Fling for free. $75 obo. PM me if interested. Will get pictures this weekend.

I have a power steering box and pump that were pulled from my '68 Dart. I believe the power steering box was from a '73 or newer A-body as it utilized a different size PS hose than the one that's supposed to come available for a '68 car. Parts available for pickup in SoCal. Will most likely be...

I decided to start the car up today and load it with tools as I was planning on driving it from my mom's house to my new house in 2 days. I had the car idling for about 10 minutes and I noticed my engine started to get very noisy (lots of metallic sounds). Well, when I went to the front of the...

Well, as some of you may know, me and my fiance bought a new townhouse. With it, we actually got a fairly decent 350 sq ft garage. Since we haven't moved in and the garage is empty, we figured now would be the time to make it the way I want it before the cars and appliances move in. Some things...

I have a 408 built by IMM engines. I currently have a port-matched LD4B on it and am making 523 hp @ 6000 rpm and 522 ft-lbs @ 4500 rpm on their engine dyno. I'm planning on installing a Holley Sniper on the car (hopefully before next spring, not sure if I'll upgrade to a Holley EFI Dual-Sync...

I took the Dart out to a car show on Saturday. SEMA headquarters in Diamond Bar, CA was having a Cars & Coffee so I took my Dart there. While I was there I took my camera to shoot pictures. I want to get into automotive photography again, but get much better at it than I was before. I want to...

Is it just me or does it seem like Gen III Hemi's are still extremely expensive? I just looked at my local CL out of curiosity and all of the 5.7L Hemi's were $1500 minimum. I'd figure after being in production for 15 years in almost every car that Dodge/Ram/Chrysler offered that there would be...

A couple of weeks ago, I drove my car from work to home and when I got to the hill my house is on, the car randomly shut off. After that, the car would crank a bit, but wouldn't turn over. I put 2 gallons of gas in the tank and it would fire up but die immediately. After that, it would just...

So, in about a month I'm debating if I really want to pull the trigger on an efi conversion. I think I'm going to go with the Holley Sniper on my 408 small block. So, far I'm getting a parts list of everything I'm going to need and I'm not sure if I have everything as I've never swapped out the...

Hey all, so the temperamental Dart decided to act up again. 68 Dart 408, Holley 800cfm dp, Holley blue fuel pump stock tank, large cam, MSD Ready-to-Run distributor. This one has started about a month ago before I got my exhaust done. At first it was just something that would happen when I...

I'm trying to sell some parts to get some extra money for upgrades/fixes to the Dart. A lot of these parts have been sitting for a couple years and I doubt I'll ever need them. The parts are located in SoCal and unless the part is small, I doubt I could ship anything. I will be able to deliver...

I'm trying to sell some parts to get some extra money for upgrades/fixes to the Dart. A lot of these parts have been sitting for a couple years and I doubt I'll ever need them. The parts are located in SoCal and unless the part is small, I doubt I could ship anything. I will be able to deliver...

So, I think I might have a bad engine problem. The engine was built by IMM about two years ago. It's a 408 stroker with forged SCAT internals, ICON pistons, 800 Holley DP, about 10:1 compression, Enginquest heads, 1.6 chromolly rocker arms, all new valve train, etc. Everything in the engine is...

So, I have this long thread on Moparts on trying to reduce the drone in my car. 408 stroker making 500 + hp. I have TTI step headers with a 2.5" X-pipe system from TTI. My drone was between 1500-2200 rpm. To some up my journey so far, I bought some dynamat and put it on the rear panel and it...

So, I am just seeing what the interweb has to say about this, but I have a Paxton supercharger I got as part of my engine when I bought it. Unfortunately, when we tore the engine apart (due to low compression in one cylinder) we found out it had a cracked piston. So, we ended up stroking it. Now...

I have a spare 360 crankshaft from my engine prior to stroking it. It's just been sitting in my garage and I'll probably never use it. It may need to be polished. $25 cash takes it! PM me if interested. Will not ship. Located in SoCal. Can deliver to Fall Fling.

Does anyone know the dimensions for the center hub on the Dr Diff 5 x 4.5" axles? I was thinking about removing my spacers on the back of my Dart and noticed that my wheels don't sit flush on the flanges. They sit flush on my 1/4" spacers though! I am getting offset shackles installed and was...

So, my Dart has been having a wide variety of fuel problems in my opinion and I think I'm getting to the root cause. I just want to make sure I'm going along the right path. The car has a 408ci engine, stock fuel tank, holley blue electric fuel pump that feeds into a pressure regulator, and a...