Search results for query: *

Auto Metal Direct 405-1267-L Front Floor Pan Half - LH - 71-72 Demon; 73-74 Dart Sport; 67-69 Barracuda; 70-74 Duster; 67-71 Valiant Rather not ship as it is on a pallet. You can pickup or I can meet you within a couple hours of Auburn, NY 13021 Price: $400 Payment Methods Accepted: Paypal, cash...

For Sale 67-69 Barracuda, 69-76 A body Dash Pad Green Shipping from Auburn, NY 13021 Price: $300 Payment Methods Accepted: Paypal I purchased this for my '67 Barracuda, did not realize it was green, vendor was not responsive to returning it. Paid $388 plus shipping for it. Thanks, Steve Looks...

Hello, Installing the trim and door seals, I removed them all 5-6 years ago, I think I got it in correctly, not sure though, How does it look? What do you do with the extra seal on each end? Think I need to get the trim moved out for a tighter seal on the window as it is barely touching...

Auto Metal Direct 405-1267-L Front Floor Pan Half - LH - 71-72 Demon; 73-74 Dart Sport; 67-69 Barracuda; 70-74 Duster; 67-71 Valiant Rather not ship as it is on a pallet. You can pickup or I can meet you within a couple hours of Auburn, NY 13021 Price: $400 Payment Methods Accepted: Paypal...

For Sale 67-69 Barracuda, 69-76 A body Dash Pad Green Shipping from Auburn, NY 13021 Price: $350 Payment Methods Accepted: Paypal I purchased this for my '67 Barracuda, did not realize it was green, vendor was not responsive to returning it. Paid $388 plus shipping for it. Thanks, Steve Looks...

Brand New in the Box: Part# 405-1267-L Front Floor Pan Half - LH - 71-72 Demon; 73-74 Dart Sport; 67-69 Barracuda; 70-74 Duster; 67-71 Valiant Floor Pans | AMD 405-1267-L I didn't realize this was in my cart when I ordered something small. Tried to cancel the order but they packed and loaded...

Hi, I have an RMS suspension and 275's up front on my '67 Barracuda. I need to make some clearance for the tire in the front of the wheel well as it touches the bottom of the fender when turning. I'm sure there is a good way to do this, could anyone share some methods? In the picture, I think...

Hello, Take my 67 Cuda with 5.7 and a TR6060 up and down my driveway, makes an odd sound. I think that the starter is still engaged. It's not cranking, but i think the gear is still engage to the flywheel. I don't know as there is any alignment or spacers that go in. I just bolted the starter...

Hello, Using the wix 33737 to regulate pressure, been struggling trying to get a fitting to send fuel out to the engine as I am using 3/8" Nylon fuel line. Just found this fitting, it should be the part I need: Quick Connect Male 3/8 Fuel Rail Hose to 3/8 Barb Adapter Fitting LS LS1 LS3 Hope...

Hello, I have new EFI tank from Tanks Inc in my 67 Barracuda. The rollover valve they include states: "If you are running a vent line it is important that the line is ran higher than the highest point on the tank including the fuel filler neck" Has anyone used this valve? Only way to get it...

Hi, My 3" tailpipes and gas tanks are competing to occupy some of the same space, I might have enough room if I bend the seam on the gas tank over, not sure if this would cause any issue with the weld and cause a leak? I know it'll damage the powder coat. I already trimmed the excess metal on...

Hello, I need to change my rear valance for 2 reasons: 1) Dual exhaust cutouts 2) There was some damage that has been fixed before I bought it, but it would look better to have new metal. The new valance came with purchase of the car, I need to get the exhaust finished up, TTI states start...

Hello, I am wondering what a normal rear ride height is. I'm measuring for a driveshaft, car is on stands. Got a 5.7, TR6060, 8 3/4 with RMS suspension and 26" tall tires. I have the rear jacked up so that there is 2.5" of clearance from the tire to the wheel well. It looks good there, not...

I'm thinking about building a cold air box, partially to mount my power steering reservoir, partially to keep hot air out... Its a small hole in the front clip, maybe make a bigger hole in the inner fender similar to what current vehicles do? Air intake I have is a carbon fiber piece from...

Hey, Working on my '67 Barracuda, got a new Tanks Inc EFI Tank. I'm not a fan of the single strap system, the tank doesn't seem tight. Of course, I have 3" TTI tailpipes, so I had to modify the J bolt on the passenger side, I might need to cut the strap and shorten it so that it will be...

Hello, I have a 32" Flaming River Steering column for sale: Flaming River Tilt Floor Shift Steering Columns FR20006CP Flaming River Tilt Floor Shift Steering Columns FR20006CP Column is too long to fit with G3 hemi (unless you want the steering wheel closer to you than I do) so I am selling...

Hi, Got at the tilt flaming river steering column for my 67 Barracuda. Used the mounts that they sell, hung the dash in, put a seat in and got a 13-3/4" steering wheel. It looks to me like the stock steering column might sit up a bit higher than this does. With the column tilted all the way...

New 15/16" A body Torsion Bars For Sale Shipping from Auburn, NY Price: $300 Payment Methods Accepted: Paypal This set of new torsion bars came with project car I bought. I don't need them

67 Small Block K Frame/suspension/brakes/sway bar Prefer Pickup in Auburn, NY but can strap to a pallet and ship at your cost. Price: 400 Payment Methods Accepted: Paypal, cash Small block k frame with swaybar, upper and lower control arms, small bolt pattern brake drums, power steering box. I...

Got some of my engineering friends to help me print out a clutch master cylinder mount. Looking to get it machined now.

For sale is the rear passenger footwell for the driverside of an A-body. I bought a full left side from AMD and only used the front. Floor Pans | AMD 405-1267-L The remaining piece is 34" long. Prefer local pickup due to size, but will ship from Auburn, NY 13021 Price: $75 Payment Methods...

Gutted the 8 3/4 that I had to use the housing and third member case to rebuild. All of these parts came with the project car, they appear to be in good condition but I never drove the car with these parts in it. So for sale is: Cone Style suregrip unit with 3.23 gears and pinion out of 489...

Hello, I've been working on the rear housing for my Barracuda, got the RMS 4 link tabs welded on, and new spring perches moved inboard. The original perches have a significant amount of deterioration on the axle tube. I can eliminate it if I can shorten the A-body housing 3" (I plan on a mini...

1965 Dodge Dart 270 – $1,800 273 2bbl – Block is cracked 904 automatic 7 ¼ rear New Parts: -Gas tank – fuel lines & fuel pump -Master cylinder – stainless steel brake lines, wheel cylinders -Transmission cooler lines -alternator -U joint -Y pipe and pipe to muffler (from Accurate)...

Hi, Working on my '65 Dart, the passenger door latch is giving me an issue. The door will shut tight, but the latch does lock it tight. If I pull the door back as to open it, it will open almost half an inch before the latch will stop it. I have removed the latch from the door and will...

Driver quality Dart Swinger. Less than 5,000 miles since Rebuild. Purchased the car in 2005 with a running 273. I rebuilt a 318 I had in 2007, purchased rebuilt 904 transmission from Cope Racing Trans and swapped the 7 ¼” rear for an 8 ¾”. Drivetrain: 1968 318 (.060 over bore makes 328...

Selling my 2001 Dodge Dakota Sport. Has the 4.7 V8, 5 speed manual, 3.92 locking rear, 129,000 miles. Asking $2,500 Auburn, NY Cash http://fingerlakes.craigslist.org/cto/4612916493.html

These seats came with a '65 Dart I bought. Guy i bought it from got them to use for the car. I like the bench seat and don't need these. I'm not sure what they came out of. The frames are solid, and all the trim appears to be in decent shape. Obviously needs new foam and covers. $100 for the...

15" Grant Steering Wheel Chrome spokes with wood grip Purchased and put it in my '70 Dart for 6 years but took it out since it didn't look right. Shipping from 13021 Buyer pays shipping $75

Set of 4 Aftermarket Rims off my 2006 Dodge Charger. Rims: Dodge Magnum 500 Retro Wheel 18x7.5" 2005-2013 300/Charger/Challenger/Magnum Tires: General Altimax HP 225/60 R 18 They were on my Charger for 2 summers (no salt) and have about 14,000 miles on them. Tires are still...