Search results for query: *

Does anyone besides Brewer Performance sell a complete change from Auto to Manual?

Does anyone know Brewers website address. Also phone.

wanted ABS plastic trim below back window. Piece should be about 15" Any help would be appreciated.

Wanted Rear Window Trim that is in NOS or better condition. Not afraid to pay for quality !!

Found a bunch of A,B &C body cars in back of a used car lot. The lot name is Van City. It is located at Nolan road and 50 Hiway. Can't post phone numbers. But I believe it is actually Raytown, MO

Just bought a set of Egge pistons from Kanter. I know what the 8.8 pistons look like, but I don't know what the 10.5 to 1 looks like. The Egge pistons are L2222. Is this the 10.5 to 1's. Don't know how to send pics or I would post them. Any pics of the 10.5's would be appreciated. Thanks

I have looked everywhere (Mopar book for 1964, Chilton's) and can not find what the cold setting is. There is the setting for Hot but nothing for the Cold setting. The engine is a 1965 Plymouth 273 solid lifter car. Anyone who knows what the COLD valve lash is would be appreciated. I changed...

I have a 65 Barracuda and bought window felt kits but none of them come with a rubber sweeper for the door windows. The kits only provide two (2) felts for each door window. Where can I find the rubber sweepers or did they make a rubber sweeper for this car ?? Thanks for your help.

I have a 65 Barracuda 273. when I bought this car it had a Edelbrock 1405 carb on it. I thought it had the 10.5 to 1 pistons and a solid lifters. Boy was I wrong. It has the 8.8 to 1 pistons with hydrolic lifters. I want to install the 10.5 to 1 pistons, but are not sure if they'll fit...

I have a 65, 273 motor with 8.8 to 1 pistons in it with solid lifters. I am looking to put the 10.5 to 1 pistons in it. Will there be valve to piston problems or will the gap be large enough. I believe the heads are a stock variety of the 1965 273 2 barrel carb car. Does anyone have any...

Wanted, I want to buy the rear chrome trim and trunk hinge for a 1965 Barracuda. MUST be in GREAT condition or NOS. I need ALL 5 pieces (2 wings, 1 center with LOGO and 2 trunk hinges)

Where might I find NOS or reman gaskets for the taillights for my 1965 Barracuda. When I took off the tail lights to have them chromed the gaskets were a mess. Will need some new ones when I put the Barracuda back together in a couple of months???

Has anyone ever removed the tension rods that are used on the hood hinges ?? I have removed these rods as I needed the room, as I went with an HEI dist. now the hinges don't let the hood set correctly. Has anyone come up with a replacement for the stock hinges ?? Any help would be appreciated.

Wanted HiPo 273 valve covers, must be in great condition, if not NOS. Not afraid to pay decent money, but not crazy money.

I am having a new cam, lifters, pushrods,springs etc done to my 65 Barracuda 273. Will I need to put in bread in oil. There will be no motor work other than the cam and timing chain and lifters/pushrods. Any information would be appreciated

Have a 1965 Barracuda and need to find the plastic clips for the lower trim that runs from wheel well to rear wheel well. Have looked on line but haven't been able to find them. They are about 1" by 1 1/2" snap on clips. I need enough for both sides. Any help would be appreciated.

I recently changed my 1965 Barracuda over to the bbp, and added front disc brakes. I have all the old parts from the swap which include, new wheel cyclinders, new brake shoes, new springs, and very good condition brake drums. I also, have the upper and lower arms from the original 65 cuda. I...

Have a 65 Barracuda with a stock 273, 4 barrel, solid lifters. Want to up grade current cam. What came stock ? Are to purple cams any good. Am a newbie to Mopar engines. Need as much info as I can get. Have a 904 auto trans with 294 gear. Thanks, sorry for all the questions !!

4 Chrome Rallye Wheels For Sale 5 x 4, 14 x 7, Tires Included 235-60-14 $800.00 Or Best Offer No Shipping, Local Only (Metro Detroit) Contact Jim See pictures on Craig's List listed under "4 Chrome Rallye Wheels for Sale"- Metro Detroit. Pictures wouldn't upload on this site.

I have a 1965 Barracuda, 273 torqueflight 904. My torsion bars are making a racket and I need to find torsion bar isolators or torsion bar silencers. Have been unable to find them on any site as of yet. Would anyone know where I might find this item. It is making driving my Barracuda a real...

Was there ever a stock or aftermarket 2x4's set up for the LA273 with the 380 or 350 cfm carbs ?

Buying a complete rearend with 11"x2" rear shoes ?? Also seller claims the rear drums are 11" the auto parts stores (all the corporate ones) and they say the 72 Demon only comes with a 9" or a 10" is there anyway the rear end came from another year or model car. It has lbp "5x4.5, which is...

Need 2 original front bumper brackets for my 65 B-cuda, it's the one that fits on the side of the front bumper and attaches to the lower front fender. Tried to find at Carlisle this past weekend but none to be found. Any help would be appreciated.

Looking for new front bumper for my 65 Barracuda in Metro Detroit area. Or if someone knows of chrome planter that I can take mine to get done in the Metro Detroit Area.

Wanted a stock 7 1/4 axle with the bbp (5x4.5) for 65 Barracuda (273). No drilled axles. Preferred close to Michigan as possible. Will pay fair price.

Looking to up grade my rear end. Currently have a automatic and a 2.73 and want to swap to a 3.23 or a 3.55 . But am planning to swap to in a A833 4 speed in the near future. Will the the 3.55 be to much for the A833 or the 904 automatic?

New a new if possible 3.23 for a 7 1/4 rear end for a 1965 Plymouth Barracuda.

I know I am asking a lot of probably simple questions but , I am just trying to learn about the Cuda's.

Do the 66 and 67 Barracuda panels fit the 65's. The 67's are the only ones that I can seem to find, in Year One or Classic Industries websites. Any help would be appreciated. Thank You

Questions about whether or not headers will fit in a 65 V8 Barracuda. That is with out cutting anything ??