Search results for query: *

Need some drop spindles for abody 73+ disc brake style

I need a set of s6 to 340/360 mounts for a 73'+ abody k member.

Need a set of roller rockers. Nothing expensive. Can be chinese but nothing with needle bearings.

1969 340 block Half filled with hardblok Sqaure decked with torque plates Line bored BRC billet steel main caps ARP main studs BPE 4.00" stroke lightweight crankshaft 4.100" Diamond flat top pistons Total seal rings gapped for nitrous Eagle H beam rods with ARP 2000 bolts Eddie heads ported by...

Andy F stopped making these and I was wondering if anyone had some laying around. Just need the brackets and calipers.

I have a 75 Duster and Im replacing the wiring harness. Underdash unit I have is used but in like new condition from a forum member. I need a new engine harness. Ive found one from herbs that says 73+ with module. My question is can you eleminate the module? And if so can I get a 73 non module...

Im looking for a pair of 15 x 8 or 15 x 8.5 polished centerlines or the jegs version. Big bolt pattern.

Wondering what the length is on a jeep liberty 8.25? Is it close enough to install in a duster? I know the perches with have to be welded in the correct spots. I just wanted to know if anyone has done this? Seems like the perfect setup. I found one local for $200 with 3.73 posi and disc brakes.

I'm looking for a good condition rear seat top or set that your willing to ship. No rips no tears. It must be the same as the seat in my car. See pics below. It's for a 75 Duster. I'd like something 73+ so it will match the pattern of the car. I don't care what color it is I'll be dying it...

Ok I took the front cylinder out if the shock bumper on my 75 duster. How do I take the inner spring out?

Is the rear seat in a dart/scamp the same as a Duster? I found a nice rear seat for sale but I'm not sure it will fit?

Im restoring my dash and the a/c heater controls look horrible and I've found a vendor wiyh an over lay that looks correct but it's listed as a b-body part. Anyone know if it's the same as a 75 duster. It looks like it's dead on.

Can the wrikles be flattened or stretched back into shape? I have a chance to buy some rear door panels that are hard to find and they have some wrinkles where the vinyl is releasing. Not bad and most of the panel is very nice.

Need a driver side panel or a set is ok also. Color doesn't matter. Need a really nice set. No junk, tears or rippled vinyl.

As the title says. Got a buddy ready to sell one.

Ok, first off I've been building racing mopar for over 20 years. So I buy a 75' /6 for my gf. Got it running new carb, plugs, wires, cap & rotor. But this is where Im stumped. It starts and runs well. Before a shift into 2nd gear it pops thru the exhaust. Also when idling not always but every...

Ok I've read that someone named Charlie S that makes one. I would like to buy a bracket that works. Dont want to fab one or hunt in Junk yards for Volare/truck mounts. Its going on a 75' duster with a factory RV2 compressor.

Just got my motor back from the machine shop. I went from a eddie headed 420" cast crank 10.2-1 compression to a eddie headed 422" 4340 crank 11.65-1 compression motor. Now for what I changed, went from a stock eddie 2.02/1.60 valve to a lightweight ferrara 2.08/1.60 valve. Also went to a...

I know there are some pretty smart guys on this forum that can help me. I've looked at the formula's out there and I can't quite figure out the what there asking on the camshaft part of it. The numbers there asking for aren't on my cam card. I have all the other numbers. It's fresh from the...

Im trying to install some new door handles on my 70 duster. They where taken off years ago by a body man. So I have no idea how they go back together. I see the ballstud which I think should clip to the ballstud on the handle but Im not sure where the rod goes. Please help me out.

As the title says how many of you have sprayed motors with a well build stock block. I have a 420" 340 based internally ballanced small block. It has a 4340 BPE crank with bcr steel caps and the block is filled. Im guessing the motor makes around 550-575hp on motor. What combo's have you sprayed...

I 've been building, collecting and racing Mopar since 1993. I am like most of you are a diehard mopar fan. But just recently I've been turned off by the lack of parts for mopars. I'm putting together another stroker small block. So I go to buy some aftermarket main caps..... Pro-gram obsoleted...

Im in the market for some 2 bolt aftermarket main caps for my smallblock. There going on a stroker which has held up with stock caps and studs thus far. I'm porting the heads and going with a flat top piston. I feel like its time to step up the bottom end. I've read the cons of 4 bolt splayed...

will a 904 dipstick fit in a 727 transmission and work?

Looking for a good set of fiberglass bumbers for a 1970 duster. Looking for a nice front and rear. Something with no damage but not looking for new or perfect either.

I recently bought a motor and it has a Milidon gear drive on it. I've never run them before. Is it worth keeping or if not whats it worth used? It's in perfect shape. Motor is a 422" 340 based Stroker, will have 13:1 comp. w/ Hughes solid cam and ported Eddy's. Basically is there and advantage...

I just bought a 340 based stroker and it has penstars cast into a couple throws. I haven't taken the motor apart yet but it does have eagle 6.123 H beams and custom Diamond dish pistons in it. I don't remember seeing penstars cast into my last 4" Mopar Performance crank but that was in 2000 and...

Looking for a set of decent 1 7/8 headers for my 70 duster. It's a manual steering race car with motor plate. I guess I would take a 1 3/4 set if they where cheap enough. There going on a solid cam 416 with ported eddys, whatcha got?

Anyone have triple TX9 70' duster? I'm thinking about going to this color combo and I want to see how it looks.

I have a few different items so I'll list them by price. Items are located in Louisiana. Hood latch: 70-72 Duster/Valiant $55 shipped, I would say nearly mint condition. Media blast or paint remover and this is as good as it gets. Grill turn signal lens: 70-72 Duster/Valiant $25 shipped...