Search results for query: *

Maybe I’m being picky but sprung for a new air gap and not too impressed. Lots of slag and bumps, holes drilled off center and clean up done upon arrival. Wondering if I should have went knock off and saved some money.

It’s been a while since I’ve been on. Moved, new job, life in general. I just got the car going again and noticed a slight coolant leak up on the top of the intake along the head. Didn’t seem like much but found small puddles on the ground. Pulled the radiator cap to check the level and found...

They smoke when I drive!! iCloud Photo Sharing

Any idea why when I tighten this down the horn stays on? 1968 Dart. It’s a grant steering wheel and adapter and was working fine until I replaced the signal switch. Was working fine after the switch was replaced but I had it off center so pulled it and centered it. Now it’s fine until I tighten...

There’s two bumps on the steering column at the floor plate. Should they be under the floor plate or over it like one my picture. 1968 Dart. Thanks.

I just did an oil change and now under high rpm the oil pressure is pegging at @ 100 psi at higher rpms. Ive been running valvoline racing 10-30 and with a wix 51085 filter. It would sit at 60-70 psi cruising and 40 at idle. This time I used valvoline advanced synthetic 10-30 and a wix 51085xp...

Since most car shows have been canceled for the foreseeable future the local clubs have come up with a great alternative. First responder, health care workers appreciation cruises. This was our first one but was the third that has been hosted. It was a blast. Local fire trucks lead the way with...

Was an all steel hood with a steel hemi scoop available? Found a guy selling one off a 1969 Dart saying it was factory original?

Standard size pistons and rods out of 1991 LA roller engine. Rod casting #'s are 53005798 which shows as a magnum part number but did come out of the 1991 LA roller engine. Can be used LA engines but mixing rods is not recommended. $50.00 OBO plus shipping from 84096

Primed, ready for paint. Large seal casting #376966 will fit years 70-90 LA motors. $35.00 plus shipping from 84096

Anyone running these with an airgap intake? Wondering if you have to grind the edges of them to get them to fit? Looking at this style

I think I already know the answer, and will be correcting it, but curious of what others would do. Replaced the rear main seal and mixed up my torque specs and didn't tighten two caps the same as the others. ARP bolts and the spec is 110 ft pounds but only torqued two of them to 95 ft pounds...

Just go a Stewart components high flow thermostat and thought I’d compare it to the high flow Milodon that I just took out. Quite a difference between them. Both 180 temperature Stewart opened twice as much and in half the time. Stewart is the silver one. Thanks to yellow rose he was the first...

Obviously one is in wrong since they are not in the same.. which way is correct?

$150.00 plus shipping from 84096 More pictures

Looking for advise on how to pick the right spring for the ride height that I want to achieve. Have searched found a lot of info on who make what but not much on figuring ride height. ESPO does + 1 & 2, stock and - 1 & 2. General does stock and plus 2.5. Hotchkis are 1 inch lower but read they...

Local car dealer host it every year, this was the 17th I believe. Really done nice, totally free, everyone gets a goodie bag and a show tee shirt and free soda/water for everyone. There were 138 cars in the show with awards given for first and second place, winners picked by show participants...

So I'm out last night picking up something I bought off the local classifieds. The guy opens his garage and sitting in the back is pretty clean Charger that looks like he's been working on. Looks like a 72 to me, has hidden head lights, and I think 72 SE came with them. So I say " nice car, 72?"...

Let me know what you have.

Thought I'd share. Not mine. Like the barn photos, could be a nice car.. 1965 Barracuda

A Trio of Dodge Demons Went Up in Flames While in Transit

Brand new 6100m Will work as a replacement for the Mallory 605 module $45.00 shipped USA

First… Full disclosure. I’ve run this system for less than 1k miles and was not happy with it. It was run with a Holley Sniper system and would work great around town but on longer trips (45 min) of non stop driving the pump would get loud and car would stall. After sitting for 15 minutes or so...

In the past three weeks I think I've had more problems than in the 5 years I've owned the car. The oil sender line broke, left me stranded an a hell of a mess to clean up. Next, new fuel pump failed then found a broken rear shock and how about, charging system over charging issue Then leak at...

Started today. When I shifted into 3rd if either was very slow to engage or almost felt like a down shift. When cruising slow speed it actually slowed the car down and didn't want to accelerate. Any ideas? Rebuilt 5k miles ago. Clutches, bands, seals, bushings, sprag, servos, all new. Fluid...

Oil pressure line broke off. Sucks!!

Chickened out when it started getting loose. Still was fun.. iCloud Photo Sharing

$35.00 Shipped USA Model # 1487 Includes: All spring options (new) 4 # 120-401 Jets 2 new 2 used 2 # 120-398 jets (new) 2 # 120-389 Jets (new) 2 cant read the number used jets 2 7342 metering rods (new) 2 7347 metering rods (new) 2 16-123 Metering rods (used) this is the only info I could find...

You arrange shipping from 84096. Send me your shipping label. I have daily FedEx and Ups at work.

$20.00 shipped USA One bolt (not shown) is drilled (hollow) not a factory bolt.