Search results for query: *

Ok with the Holley 750 dp at idle with idle screws 1 1/2 it idle between 8-10 vac if I turned them in 1/2 it jump up to 10-12 still very rich. The Holley already has holes drilled in the main butterflies, and has 4 corner idle screws. Here's a picture

ok guys been having trouble getting my combo to run well. I have 3 different carbs lying around and just can't seem to be the right combo together. My setup is a stock 1976 RV 360bottom end, Eddie rpm heads, lunati voodoo 226/234 @.050 lift 494/513, rpm air gap intake, stock electronic ignition...

Hey car looks awesome! I haven't been present of the fourms for a while. Looks like your having a few issues with carb and my first couple autox I did too. Im no expert but I would try and find a 750 dp, mechanical sec. Smaller carb might make less hp but on the autox course you can sacrifice...

Pending sale right now. Summit sells the same seat if you look under Cerullo, Demon34071 I think you would be fine in them they felt big on me. Nice thing with summit is you can try them out and they are returnable. Procar is another cheap option but if your budget fits look up Corbeau.

Johnny please pm me, I am with MoparConnectionMagazine.com and want to see if you guys might want to work with us. Thanks!

Sorry I forgot a picture

Im open to offers?

Everything sold thanks FABO

Replies to PMs sent. 6pk2goDemon Ill put you next in line for the belts if he passes, thanks.

I have a nice set of Crane adjustable rockers, shafts and pushrods. They were pulled from a running motor. Everything looks to be in great shape. $500 plus shipping Located in Buckeye Lake Ohio

I had these seats in my 1972 Dart, they are used but great shape, no rips or tears or worn spots. They recline and flip forward for rear seat access, I have universal sliders and brackets on the bottom that will go with them. Seats are comfy I drove 7 hours in them and was fine. Looking for...

I have a Door panels and Seat covers for Duster, I believe it will fit later dusters and dart sports 1973 1974 1975. Door panels and covers are custom made to look original but are not exact. good quality vinyl all black. I also have the rear divider and rear package tray with the cuts in it for...

Sold thanks 303

Heads lowered to $700 SHipped Adjustable rockers $120 shipped Pushrods $80 shipped

Yea I could meet somewhere, I'm not far from Columbus about 20-30 mins east.

Hard plastic

I have a pair of A body high back buckets, need recovered foam isnt in horrible shape, have the tracks and plastic backs. I can ship but wont be cheap, $350 located central ohio, ill try to get pics up soon. Can pm me and get pics sooner

This is a custom made spoiler from triggerman on hear, I bought for my car, sanded and painted it satin black, but decided no to use it. I havent drilled holes or anything in it. $100 plus shipping Located central ohio

Update had heads cleaned dissasemble and checked for cracks, they are good to go they do need valve job, comes with Comp springs up to .510 lift, retainers and stainless valves. I only took picks of the one head but the other looks the same but can always take more pics. Heads do not come with...

Still have cam available?

Up for sale is a very rare piece that I have decided I will never build and want to see it get used. This is a true 1970 date coded 5-25-70 block and dont not have a serial number stamped on oil pan rail. The block has been fixed see pics, it was done at Columbus Col-Weld which is very reputable...

-nice set of x heads I took off my 360. They are date coded 1969, they have not been ported,long story but heads should be bolt on ready, I ran them for over 3000 miles and no problems, these have had new stem seals and Comp Cam valve springs installed when I built motor. I was smoking very...

I'll double check but I think they are all gone.

Don't tell me that! That's honestly first thing I read really bad about them, I know customer service isn't greatest.

Yea I do get s little gun ho and probably because this week I'm off and start new job next and don't want to mess with this then. Anyway intakes off now, it was sucking oil bottom of gaskets were soaked with oil and the im runners too. I figured it was this for sure when I pulled carb off to...

To answer some questions I decided on heads because if it is rings my motor builder is going to eat it one way or another. Untill I fixed heads he would of blamed it on something else. The heads came with springs that would take up to .500 lift, my cam is a comp .484, could this still cause an...

I installed new heads on my 360 motor and I have some blueish smoke coming from my exhaust, which I know is burning oil. Give you some background, i changed out heads because i was using a qt of oil a tank of gas. I talked to the guy who built the motor and he said that the heads probably needed...

I have up for sale a mild built 360. Motor is fresh, been started on engine stand. Has .030 Keith black 190 pistons, 1969 X heads, new Comp cam .484 nostalgia plus cam with matching springs, edelbrock air gap intake, has stamped steel rockers, direct connection valve covers, new fuel pump...

Yea I don't plan to run the car much past 5500 anyway, might get a slightly bigger can but I have 1.6 rockers too of forgot to add that will help with the current cam. Only other thing is to check the valves with those Pistons just to make sure they don't touch. Also anyone have a part number...

Was looking at road race style oil pan, i plan to do a lot of street driving and hopefully few autoxs this year. I have the RMS set up and like the price of the Kevkos, was wondering if anyone had experience with any or could recommend a part number for kevko. Also motor is .060 over 360, eddie...