Search results for query: *

  • Users: ariffle
  • Content: Threads
  • Order by date
  1. ariffle

    [Found!] 67 Barracuda fuel gauge for a rally dash

    I still need a GOOD fuel gauge for my 67 Barracuda. it is for a rally dash. Please send pictures front and back if you do have one Thank you! These picture are of what I'm after.
  2. ariffle

    [WANTED] need fuel guage only for a 67 Barracuda ralley dash

    I have a dead fuel gauge in my rally dash on my 67 Barracuda and I need a replacement but don't want to buy a new complete set from Classic for $400.00. does anyone have one? see the photo of the gauge needed and what cluster it goes in.
  3. ariffle

    [WANTED] WANTED! 318 pulleys

    I am looking for pre. 1974 318 crank pulley that is 7 1/4 inch in diameter and a matched water pump pulley at 5 3/4 inch diameter. This is a non power starring and non a/c setup. But I'd like a double grooved water pump pulley and a double crank pulley. The bolts for the crank pulley would be...
  4. ariffle

    Need correct crank pulley!!!! Any ideas?

    I am looking for the correct size crank pulley for my pre. 74 318. Apparently the one I have currently is the VERY small diam. one and could be the reason why my engine can't stay cool. I have noticed that EVERY 318 I have looked at that was a strip car only, has this same small crank pulley and...
  5. ariffle

    [FOR SALE] shorty headers for an Abody

    These Headman headders Modle#78500 were only used for about two weeks then I changed them because I wanted to put 2"exhaust on instead of 1 1/2" and needed more at the collector angle. I had these ceramic coated. They have very minimal surface scratches on them but look awesome. I paid $299.00...
  6. ariffle

    [FOR SALE] three original hubcaps off from a 1967 Barracuda

    I have three of the four hubcaps for a 1967 Barracuda. $100.00 for all three plus shipping. Located in Washington state zip code 98282.
  7. ariffle

    [FOR SALE] 66 Abody bucket seats

    these seats need rebuilt but has good structure and trim. they are off from I believe a 1966 Valiant/Barracuda. Shipping will be a pain so pickup is ideal. I'm asking $200.00 for both and won't sell individually. I live in Washington state zip is 98282.
  8. ariffle

    [FOR SALE] 67 Abody center console and linkage

    I have a center console from a 67 Barracuda auto trans, Shuft linkage parts and shifter. Shift linkage is in great shape and is a setup for a 4 barrel small block 273 cid, console needs some work and is missing the door latch so it won't stay open. Asking $200.00 O.B.O plus shipping. I am...
  9. ariffle

    [WANTED] 22" fan shroud for a small block v8

    I'm looking for a fan shroud for my 67 Barracuda 273 Camando. The length across is 22" the mechanical fan is an 18" fan. One that is in very good, like new condition. Original type style. Thanks!
  10. ariffle

    [WANTED] Stock exhaust manifold flanges!!!

    I'm looking for a pair of stock two bolt style, exhaust manifold flange/ collector ends off from a small block 273 cid. a buddy of mine needs them and I unfortunately tossed the ones I had, so I'm trying to help him out. They must be in good usable condition with mounting bolts if possible. I...
  11. ariffle

    [WANTED] 67 Barracuda door glass sliders

    I'm looking for 67 Barracuda FB door glass sliders. These black soft plastic pieces clip on both, inside and outside at the front edge of the glass and keep the glass running up and down in the vent window post channel. There are two sets per door. they snap together to sandwich the glass...
  12. ariffle

    [WANTED] Console auto shift backup light switch

    I'm looking for a good backup light switch for a 67 Barracuda automatic console shift. PM me if you have one and would part with it. Thnx..
  13. ariffle

    [WANTED] 67 a body 3 spd shift Mech parts

    I have a broken cable that attaches to the chrome knob button. No one makes them. I'll make one if I have to but would rather have an original one. it's in the chrome tube on the shift Mech. HELP!!
  14. ariffle

    [WANTED] to floor shift button cable

    I hope someone has the cable that is in the chrome shift arm that the button attaches to for a 3 speed auto floor shifter. The cable broke off just below the push button knob. It's for a 67 barracuda. I have been looking for repop ones or N.O.S ones with no luck. Thanks for any advise or help.
  15. ariffle

    67 Barracuda Fastback

    I want to replace my front windshield gasket with a 67 gasket and not a 68 or 69 gasket. My car is going to be blacked out with no window trim. Can I get the gasket? I'll just use black locking strip.
  16. ariffle

    Steering column HELP NEEDED!!!!!

    Does anyone have any documentation on how to PROPERLY teardown an automatic Manual steering column? This is for my 67 Barracuda. I can't get the shaft out of the tube. Thanks!
  17. ariffle

    [WANTED] 1967 Barracuda steering wheel

    I'm in need of a 1967 Barracuda steering wheel. Black is best, but I'll consider any color, as it can be painted. :prayer:
  18. ariffle

    67 cuda FB progress UPDATE

    Made some progress and figured I would share it with you all as requested from my last posted update. Funished up with the floor pans that we made "NOT bought". Just like all the rest of the metal work that was needed. We also started making the rear window track out of sheet metal stock and a...
  19. ariffle

    Making good progress!!

    We have been making progress on the 67 Cuda fastback. we have cut out rot and hand fabed trunk panels and qrtr. panels in the past few days. Also worked on the trunk lid and got it back into shape. we will be working on floors and trans. hump soon. then ill fab new rear window channels after I...
  20. ariffle

    drum to disk brake conversion question

    I know there is a more modern vehicle that I can use the front spindles and brakes from that will fit on my 67 barracuda fastback, but damed if i know what it is. Does anyone know for sure what it is? If you do, are you using them and did they fit correctly? Thanks for the help!
  21. ariffle

    67 barracuda 727 column shift linkage

    I'm looking for an origional column shift linkage complete. THis is for a 67 barracuda fastback with a 273 and a 727 torque flite auto trans. I baught the car and it had no linkage with it and no kick down linkage either. The 272 has been converted to a reverse shift pattern manual and I don't...
  22. ariffle

    67 Baracuda non A/C heater box Needed.

    I am in need of a good usable Non A/C heater box assembly for a 67 Plymouth Barracuda.THanks Guys!
  23. ariffle

    67 Fish Fastback "NEW MEMBER"

    Hay all! Just wanted to do this right and intriduce myself. I posted earlier in the week under a parts wanted post. I found the parts Ive been looking for, Thanks... My son and I are restoring a 67 Cuda fastback as a senior project for him. It needs to be compleated in three years for his...
  24. ariffle

    67 Cuda bucket seats?

    Hay all! THis is my first post ever. My son and I are restoring a 67 Cuda fastback and are looking for front bucket seats and the center console. If no seats are available, are there any after market seats that would fit? I'd rather have the ones that go in this car if at all possible. Thanks...
Back
Top