Search results for query: *

So I changed the fuel filter regulator from the one I got from tanks inc to a Wix filter and the pump sounds better and the car now idles very well. It still seems to hesitate when you touch the throttle still but if you feather it you can now get it to rev up. It still pops all the time though

I did have to pull the intake to run new heater hoses under it maybe it is leaking. I will look this weekend

Yes it does

Any ideas? I notice my throttle position is at 8.4 even when its completely closed and my air fuel is in the red

This is a pic when it's running

Still sputters when you touch the throttle and dies.

Me again. So I got my exhaust on and it still is not running right still idles too high. When I hook computer up to it it says my air fuel ratio is at 19 and is red it says this before engine even started

The one on the right is the one I have blocked off. I will check my fuel filter tomorrow if I get a chance

also stock injectors and the 02 sensor is plugged into the threaded hole on the headers themselves I will try getting and exhaust system put on it and see what happens at that point anything as far as tunning is out of my skill set

yes

255 liter high flow pump to a corvette regulator I got it all with my tanks inc tank

so the exhaust could defiantly be my problem

what are your guys though on it being the corvette fuel regulator? the fuel pressure does go over 60 when its running

Popping from header

I just called the exhaust shop im going to try and get it booked in I feel like it might be a big part of my problem. the 02 sensor probably does not get a very good reading without it

no the 6.1 never came with that option

ok so after doing the throttle trick and putting the breather back on it seems to run a bit better it is idling a bit high 1100 rpm though and still back fires when you give it throttle could it be cause im running open headers with no exhaust? its not stalling anymore

I tried the breather idea but then the car idles really high like 1200 rpm. see what I mean this car is driving me crazy

I have the stock intake and I have the port on the back of the intake plugged as well as the small one on the front. I also have the port on the oil cap filler plugged as well. I did have the intake off so I though I might have a leak I sprayed brake clean along the outside edge to look for a...

That did seem to help I can give it a bit of throttle now but still backfiring and then stalling out. one more thing I noticed is the fuel pressure is at 58 when pump is on but car not running but then jumps above 60 when running that's as high as my gage goes

it does not smell like it is running rich I was thinking maybe a coil pack or maybe a plug but the engine was running smooth when it was pulled. all the sensors are new im not saying that means they are good. the air pressure sensor was reading 89 if I remember correctly I am at a high altitude...

so I have a 6.1 hemi its running a bbk 87mm throttle and a megasquirt gold box it has TTI Headers with no exhaust. the car will run and idle but it backfires every once in awhile if I touch the throttle it just seems to die or backfire then die anybody had this problem? I called megasquirt and...

Answered my own question can mods delete this for me please

So I finally have my car running but I just have the base tune that came with the gold box. I have tuner studio downloaded and hook to the car but have no idea what to do after that. Is it possible for someone to send me there tune and then I can upload it? Car is a 6.1 with 87 mm throttle body...

The drivers door is a 68 and passenger appears to be a 67 no big deal it's a slant 6 with a gen 3 hemi swap done on it

So it's a Phillips head screw that goes in there? Any idea on length?

Installing the glass on my 68 fastback barracuda there seems to be a small hole on the inside top middle of the door that holds the windows together. I was told is a specialty bolt can anybody point me in the right direction to what I need?

I put new wilwood brakes on the front of 68 barracuda and SSBC disks on the back. Im wondering what is the best place to get brake lines? I called inline tube and they said the lines they sell will not work with wildwood. is there any place that sells lines that will work or do I have to have...