Search results for query: *

Want to give a giant shout out to James and the gang at P-S-T. 3 years ago I bought and installed a bunch of front end rebuild parts from pst and everything went together swimmingly. I recently noticed a tear in one of my polygraphite lca bushings that I created when I over pressed the bushing...

Pair of 340 blue stripe 892/893 torsion bars out of a 72 Duster. Stripped clean and painted with high solids black industrial. $100 plus shipping from North of Boston to the lower 48. Approximate shipping cost to west coast $60, mid country $50, Southeast coast $40. Prefer money order but will...

2 years ago I swapped out my 727 for a 46RH transmission with a stock 5.9 magnum higher stall converter. I'm not sure what the exact stall is but the transmission came out of a 95 dakota with a 5.9 magnum. The converter is blue with a HS sticker on it and this is the only way I could know its...

After performing due diligence and being very unhappy with my current cooling I decided to pull the trigger on a Cold Case radiator. My current setup is a BeCool 3row with a 2” core, cross flow which came with the ‘67 when bought some years back now. It always ran a little hot dipping as high...

since the old Mopar 5 blade viscous fan kit is now unobtainium is anyone using the Mancini 6 blade viscous kit? Mancini Viscous Fan Package I have a small electric flex that’s at least 25 years old that I’d like to scrap for the viscous mechanical stockish set up. I know I just missed out on...

67 Dart, rebuilt k frame over the winter. All new components. Have the ride height good, camber good and caster as much as possible. My question is how far up the front And back of the front tires should you measure for accurate toe in? I’ve seen the old gages with the pointers and they appear...

I'm in the process of nearing the end of my 46RH swap and was contemplating a driveshaft loop install. I'm not sure if this would even be viable or really recommended safety wise but thought I'd ask. I was thinking about fabbing my own driveshaft loop. The A508 has it's original crossmember...

Anyone ever here of using this in their transmission? Found a YouTube vid of a guy that used this in his A518. I believe he said he used 2 gallons of this with 2 quarts of dot3 fluid if I remember correctly. I know JD lubes are supposed to be superior as they’re used in HD tractor applications...

Just curious if the OD/LU converter can be used in a 727. I have a High Stall 46RH converter with 5.9 magnum weighted flex plate and am wondering if I could swap it out with my 727 weighted tc and neutral plate. Thank you....Brian

I’ve heard some of you say how you’ve done this and didn’t want to pull my motor so made up the 4x4 inner fender supports and suspended my motor from threaded rod into the intake manifold.

I’m working on getting my 46rh ready as well but I have a question on piping up the pressure switches. Do the OD and LU switches need to be grounded to the transmission through the pressure port piping? I hope I’m saying this right. If I use brass fittings to pipe my pressure switches and use...

I’m planning the 46RH swap to replace my 727 in the fall and have decided to do the transgo tfod-hd2 valve body shift kit. I haven’t seen a thread on this shift improvement kit so decided to give it a documented effort for those of us with limited experience with transmissions and valve bodies...

Hi guys, I've decided to do it this fall and have a rebuilt A518/46RH to replace my 727 with. Going in a 1967 Dart. I've done lots of research and will start a thread and try to do a good documentation on it when I get there. I'll have some questions for the smart tranny guys. My first one is...

Ok...I plan on rebuilding my 67 Dart front end and have new PST adjustable strut rods. My question to the suspension gurus is how do you know where to adjust them too after installation? I've rebuilt a spare set of LCA's with support plates and new bushings. Have a set of firm feel tubular UCA's...

Has anyone modified a stock oil pan for windage or the track instead of buying a high end milodan or other brand? Curious as to what it took exactly. Thinking about trying it on a possible spare but would love some experienced input. Thanx.

Hi Guys, The other day I was out as a cruise night and noticed my voltage all of a sudden became erratic on the low side at idle. I was actually idling through the parking lot when the voltage dipped and caused a stumble and stall. At increased rpm the voltage recovered and all was good. Checked...

Hi gang, clearances measured good and new cam installed, broken in and running good when not under any load. I’m not able to take it for a test drive yet but want to see what you guys think about my timing for the application to get it close. Specs: 5.9 Magnum Stock heads Hugh’s camshaft...

Ok....why is it on some dual plane intake manifolds the center rib is notched at the carb flange and on some manifolds it remains in tact to the top of the flange with squared corners. Any benefit to the notch and can porting it make any difference?

Well my new cam and valve springs arrived...along with other related parts needed. I have the engine in the car but about all broken down for cam swap but figured I’d change the updated valve springs first. It’s a 5.9 mopar 360/300 performance crate magnum with very low mileage. I’m using the...

I have a stock 5.9 Magnum Mopar Performance 300HP crate engine with about 30k on it. If I change out the heads for EQ Hughs massaged with 2.02 intakes, associated exhaust valves and stronger behive springs but left the original cam, pistons and M1 dual plane intake manifold on it what kind of HP...

Hi guys, just bought a new headlight switch and noticed it comes with a tab on the rear of it. I'm not sure what this is for as my old switch doesn't have it. Could it be an added ground? Thank you.

Hi Gang, Looking for a federal power steering pump cap. It doesn't have to be anything special just something to plug the hole. Any cross references from anything that would fit out there? Thanks in advance. Brian

Wondering if anyone's gotten the new pertronix igniter III, 4 pin module yet and what the verdict is. I know trailbeast was waiting for one to be shipped but haven't heard of anyone receiving one. Summit shows them shipping by 3/9 but you know how they are. They just keep pushing the date out...

Man I love these wheels but it seems the only size that may work on the front of my '67 Dart in a 15" diameter with a workable backspace is 8" wide. So does anyone have 15x8's with a 4.5" backspace on the front of their '67/8 or 9 Dart? If so what tire are you running here that isn't rubbing. I...

Hi Gang, I had an email from a member requesting some info on my rear wheel/tire set-up and figured I'd post it for all the guys...and girls. My Drivetrain consists of a 1999 Mopar Performance Magnum Crate unchanged with exception of an Edelbrock Air Gap intake and a Demon "Street Demon" 625cfm...

Anyone ever tried this March under drive crank pulley? Just changed my harmonic damper and found my stock pulley was rotted through one of the grooves. An accident waiting to happen. Need to replace it but thought I might try this March pulley. Will The under drive spin my water pump faster...

How can I repair this without replacing the whole Chanel assembly? Thanks fabo

Has anyone used a Blaster2 coil, resisted or unresisted, with an HEI module conversion. I picked up a disguised mopar ECU/HEI conversion and have a Blaster2 coil but no E-coil and was wondering if I could use the Blaster2 coil unresisted and not burn it up.

Could use some help here guys. I've got a power disc conversion that works great. (SSBC) Brakes grab and hold well with great pedal feel. Plenty of vacuum @ 21". My problem is that when I'm stopped with my foot on the pedal for a length of time the pedal ever so slowly pushes to the floor...

Hi gang, My windshield's ready to go in, new gasket in hand and I can't find locking strips anywhere. I'd seen lots of sets on ebay about 3 months ago but can't seem to find any around now. Any help would be totally awesome.:banghead: